International Journal of Applied Engineering Research (IJAER)

 

 

Volume 13, Number 06 (2018) Special Issues

 

 

CONTENTS

 

Design and Manufacturing of a holding fixture to test the tensile strength of a flat specimen
pp. 1-6
Joginder Singh, Dr. M.R.Tyagi, Mr. Ajit, Gianender, Rinki Yadav

Noise and Acoustic Emission Monitoring of Gear
pp. 7-12
Ram Kunwer, Prashant Shukla, Swapnil Sureshchandra Bhurat

Drink & Drive Detection Technique with Ignition Lock
pp. 13-16
Ankit Kumar, Ankit Bansal

Comparative study of surface coating for automotive application-A review
pp. 17-22
Ramesh ChandraYadaw, Shailesh Kumar Singh, Somanth Chattopadhyaya, Sanjeev Kumar, R.C.Singh

Tribological behaviour of chromium nitride coating
pp. 23-25
Shailesh Kumar Singh, Somnath Chattopadhyaya, A. Pramanik, Sanjeev Kumar, A. K. Basak

Generation of Coupler Curve Equations for A 4-Bar Mechanism Using Lagrange’s Polynomial
pp. 26-29
Khalid Nafees

Design of Machine Vision System for Automated Inspection in Robotics
pp. 30-34
Tushar Jain, Dr. Meenu, Dr. H K Sardana

Modelling Of Visual Performance in Mobile Environment
pp. 35-41
Sachin Rathore, Saumya Sharma, Rishabh Teharia, Jasmeet Singh

Genetic algorithms in computer aided design
pp. 42-52
Ashish Sharma

Diagonosis of Remaining Useful Life Estimation of Ball Bearing Using Artificial Neural Network
pp. 53-59
Kuldeep Singh, Somesh Agarwal, Piyush Pant

Design and fabrication of automated duster for cleaning of white board
pp. 60-65
Makhan Singh, Vardan Sharma, Deepak Kumar, Vikram Kumar Singh, Nitesh Kumar

Design and Analysis of Disc Brake with different drill pattern, drill size, drill angle and varying thickness using Autodesk Inventor Professional
pp. 66-72
Alok Kumar, Tuhin Srivastava, Shatakshi Dwivedi

Implementation of DMAIC Methodology for reduction of weighted-defects in a vehicle assembly process
pp. 73-80
Pranav Bharara, Rahul O. Vaishya, Mayank Vaishya

Optimization of Inventory by Supplier Selection Using Topsis Method in Piston and Ring Industry
pp. 81-87
Deepanshu Gupta, Anukriti, Vivek Pathak

Waste reduction by the assessment of reverse engineering attitude in gear production unit
pp. 88-92
Neeraj Kumar, Anurag Bhargav

Optimization Characteristics of Powder Mixed Electrical Discharge Machining (PMEDM)
pp. 93-98
Naman Jain, Prashant Singh, Mayank Kasera, Prashant Bhatt, Vikas Kumar Singla

Enhancing Supply Chain of Humanitarian Supply Chain Management - A Case study
pp. 99-110
Somesh Agarwal, Kuldeep Singh

Execution of Reverse engineering- an ecologically responsive attitude smeared in OEM plants-Case Study
pp. 111-115
Neeraj Kumar, Vipin

Reliability and Availability Analysis for a Manufacturing Network by Using Active Redundancy
pp. 116-126
Smriti Mishra, Prashant Bhardwaj, Neha Badhauria

Blood pressure and ECG signal interpretation using Neural Network
pp. 127-132
Varun Gupta, Monika Mittal

Auto-regressive Time Frequency Analysis (ARTFA) of Electrocardiogram (ECG) signal
pp. 133-138
Varun Gupta, Abhas Kanungo, Pankaj Kumar, Arvind Kumar Sharma, Anurag Gupta

Object Recognition using Neural Networks
pp. 139-143
Pradeep Jain, Meenu

Prediction of Spring-back Deformation for CFRP Reflectors Manufactured using Various Processes
pp. 144-148
Tushar Gajjar, Dhaval B. Shah, Shashikant J. Joshi, Kaushik M. Patel

Performance evaluation Of Boiler In 46mw Bagasse Based Cogeneration Power Plant
pp. 149-158
Nishant Singh, Bhanu Pratap and Sandeep Kumar Kamboj

Influence of Magnetic Field on Bead Geometry of Gas Tungsten Arc Welded Stainless Steel Plate
pp. 159-164
Rajeev Kumar, Somnath Chattopadhyaya, Raof Ahmad Khan, Sanjeev Kumar, B.P.Agarwal

Experimental investigation of process parameters in nitrogen assisted EDM of En 19 steel
pp. 165-169
Nishant Kumar Singh, Sandeep Agrawal

Optimization of process parameters for tensile strength and micro hardness of friction stir welded AA6082 specimen using Response surface methodology (RSM)
pp. 170-174
Mohd. Rashid, Shailesh Kumar Singh, Somnath Chattopadhyaya, Sanjeev Kumar

Fabrication and characterization of Glass Fiber/SiC Reinforced Polymer composite
pp. 175-178
Devesh Sharma, Shailesh Yadav, Suraj Chand, Umesh Kumar, Bhaskar Chandra Kandpal, Ashok Kumar and D. K. Gupta

DESIGN & FABRICATION OF PNEUMATIC POWERED HACKSAW
pp. 179-183
Ashutosh kumar Yadav, Abhishek Tyagi, , Ankur Jaiswal, Sandeep Kumar Singh and Rupesh Chalisgaonkar

Effect of heat input on the microstructure and mechanical properties of a Welded joint-A Review
pp. 184-188
Saadat Ali Rizvi, Mumtaz Ahamad

Analysis of Graphite reinforced Aluminium-6061 Metal Matrix Composite using Stir Casting Method
pp. 189-193
KumariArchana, Pratibha kumari

Wear Behaviour of FeCrMoW Hardfaced Coating
pp. 194-197
Pratibha Kumari, Kumari Archana and Subodh Sharma

Carbonaceous Phase Change Nanocomposites: A low cost energy storage approach
pp. 198-201
Apurv Yadav, Vineet Kumar Vashishtha, Harsha Yadav

OEE Enhancement Using TPM in Light Machine Shop: A Case Study
pp. 202-208
Arunesh Chandra, Yatender Chaturvedi, Ajay Kumar

Chip Morphology Study during Turning of AISI 304l Alloy Steel under Different Cutting Fluid Conditions
pp. 209-214
Gunjan Sharma, Sharad Shrivastva

Impact of Loading and Unloading Strategy on Performance of a FMS at Different Level of Routing Flexibility
pp. 215-219
Md Mushid, Ankur Rajvanshi, Dr. K. L. A. Khan

Experimental investigations on in-situ developed Fe-Cr-C hardfaced layer
pp. 220-223
Arun Kumar, Abhishek Kumar Pandey, Sunil Pandey

Study of Temperature with Biodegradable Cutting Fluids – A Step Towards Green Manufacturing
pp. 224-229
Dr Narayan Agrawal, Rahul Katna

Microstructural Characterization of an 800 MPa Single Phase Ferritic Advanced High Strength Steel (AHSS)
pp. 230-237
Manoj Singh Bisht, Shrabani Majumdar, Raj Kumar Sahu

Optimization of parameters of GTAW for surfacing of AISI 304
pp. 238-240
Neha Bhadauria, Prashant Vashishtha, Smriti Mishra

Development of Mathematical Models for Bead Geometry of Al6061 surfaced using GTAW
pp. 241-244
Prashant Vashishtha, Neha Bhadauria

Effect of Age Hardening and Quenching Media on Aluminium Foams
pp. 245-248
K. L. A. Khan, Gunajeet Kumar, Dr. R Prasad

Optimization of delamination factor in drilling of carbon fiber filled compression molded GFRP composite
pp. 249-253
Anurag Gupta, Ajay Singh Verma, Sandeep Chhabra, Ranjeet Kumar

Friction Stir Processing as a Technique of Metal Foam Formation
pp. 254-258
Sharaf u nisa, Zahid Akhtar Khan, A.N Siddique and Sunil Pandey

Solar Powered Seed Sowing Machine
pp. 259-262
Kalash Singhal, Gaurav Prajapati, Vipul Saxena

Modeling of Elastic properties of Particulate Composites
pp. 263-267
Ajay Kumar, Dr. Sachin Kumar Singh, Dr. Subodh Sharma, Dr. Arunesh Chandra1

Effect of Process Parameters on MRR and Surface Roughness in Turning Operation using Taguchi Method
pp. 268-273
Piyush Pant, Kunwar Laiq Ahmad Khan, Rupesh Chalisgaonkar and Shobhit Gupta

Analysis of load cell
pp. 274-277
Ranjeet Kumar, Sandeep Chhabra, Ajay Singh Verma, Anurag Gupta

Simulation of Internally Fitted Baffles in STHEx for Different Reynolds Number
pp. 278-285
Piyush Gupta, Avdhesh Kr. Sharma and Raj Kumar

Portable Car Cooling System
pp. 286-289
Gaurav Sharma, Yogesh Kumar Sharma

Design and Fabrication of a Setup to Measure the Laminar Burning Velocity of Gaseous Air-Fuel mixture
pp. 290-294
Vipin, Aman Gupta, Ayush Tyagi, Dushyant Rawat, Aprajit Jain

Bio-Diesel- An alternate source of future
pp. 295-298
Ashok Kumar, Ajay Tyagi, Vineet Kumar Vashishtha

Thermal Analysis of Double Pipe Heat Exchanger
pp. 299-302
Ashish sharma, Ajay Tyagi, Ashok Kumar

Study of the Recent Catalysts Utilized In Biofuels Production
pp. 303-307
Ajay Singh Verma, Anurag Gupta, Ranjit Kumar, Sandeep Chhabra

Developing Thermal Model for Single Basin Double Slope Solar Desalination System
pp. 308-312
Sandeep Chhabra, Ranjeet Kumar, Anurag Gupta, Ajay Singh Verma

Waste Heat Recovery from Exhaust of Diesel Engines using Novel Organic Rankine Cycle Configurations: A review
pp. 313-316
Alok Manas Dubey

Performance of Various Designs of Active Solar Stills: An Overview
pp. 317-322
Aseem Dubey, Vipin

Design of Upright Assembly for SUPRA Vehicle
pp. 323-326
Ashish Kumar Singh, Tuhin Srivastava

A CFD Analysis to Compare the Performances of Fin and Tube Heat Exchangers having Different Augmentation Techniques
pp. 327-333
Mohd Zeeshan, Sujit Nath, Dipankar Bhanja

Comparative Study of Emission and Combustion Characteristics of Biodiesel, Biodiesel Blends and Various Fuel Additives
pp. 334-340
Utkarsh Vats, Rishabh Chaudhary, Shailendra Kumar, Ajay Giri, Sandeep Kumar

Magnetization of Diesel fuel for Compression Ignition Engine to Enhance Efficiency and Emissions
pp. 341-347
Swapnil Sureshchandra Bhurat, Himanshu Sharma, Amrit Kumar Jha, Krishna Kant Dixit, Prashant Shukla, Ram Kunwer

Solar Energy Harvesting Using Nanotechnology
pp. 348-353
Himanshu Kumar Rai, Priyanka Rai

Experimental Investigation of temperature in Fins
pp. 354-357
Subodh Kr. Sharma, Ajay Kumar, Pratibha Kumari

Performance characteristics of CI Engine fuelled Diethy - Ether and its comparison with diesel fuelled CI engine
pp. 358-362
Abhishek Yadav, Shwetabh Singh, Shivshankar singh, Shubham Bishnoi, Tarun Goyal, Shashank Pandey

A Review on Dynamic Rheology for Polymers
pp. 363-368
Payal Sharma, Ujjwal Chauhan, Dr. Sanjeev Kumar and Dr. Kamal Sharma

Emission Reduction of Spark Ignition Genset with Ethanol Blended Gasoline Fuel
pp. 369-374
Sachin Sharma, Kishor Kulkarni

Numerical Analysis of different blade profile of wind turbine
pp. 375-385
Gaurav Kumar, Vipin, Raja Ram, Neeraj Kumar

Studies and Analysis of Effect of Foreign Particles on the Parts of Steam Turbine
pp. 386-395
Karunesh Kumar Yadav, Raju Giri, Dharmendra singh, Piyush Priyadarshi, Monu Kumar

 

 

 

[UP]

 

 

© All rights are reserved with Research India Publications                             Home  Journals  Contact