Editorial
Board Members:
Dr.
Mohammed Salifu, Associate Professor of Transport Engineering
& Head Department of Civil Engineering, Faculty of Civil and
Geomatic Engineering College of Engineering, Kwame Nkrumah University of
Science and Technology (KNUST)Kumasi, GHANA
Prof
Dr Zulkifli Yusop, Dean of Research, Water Research Alliance
Universiti Teknologi Malaysia, Malaysia.
Dr.
Tachtouch Bourhan, Department of Thermofluid Science. King
Fahd University of Petroleum and Minerals, Dhahran 31261, Saudi Arabia.
Dr.
Abdul Razak Rehmat, Associate Prof. Department of
Polymer Engineering. Universiti Teknologi Malaysia. Skudai, Johor,
Malaysia
Ahmed
Sahin, Professor of Mechanical Engineering, King Fahd
University of Petroleum and Minerals, Dhahran 31261, Saudi Arabia.
Dr.
Adel Taha Mohamed Abbas, Associate Professor of Computer
Aided Design & Manufacturing, Mechanical Engineering
Department, College of Engineering, King Saud University, Riyadh,
Saudi Arabia
Dr.
Fahd A. Alturki, Dean of College of Engineering (Majmaah
University), Associate Professor of Intelligent Systems And Control
Engineering, King Saud University Riyadh, Saudi Arabia
M.
A. Habib, Professor, Mechanical Engineering Department, King
Fahd University of Petroleum and Minerals, Dhahran 31261, Saudi Arabia.
Prof.
Abdullah M. Al-Shaalan, EE department, College of
Engineering, King Saud University Riyadh,
Kingdom of Saudi Arabia.
Dr
Mir Iqbal Faheem, Professor & Head, Dept. of Civil
Engineering, Deccan College of Engineering & Technology, Darussalam,
Near Nampally Hyderabad India.
Sameer
Chand Pudaruth, Computer Science and Engineering Department,
University of Mauritius, Reduit, Moka, Port Louis, Republic of
Mauritius.
Area of Interest: Multimedia, Computer Vision, ICT in Education,
Software Engineering
Mohammad
Amin Horiri Ardebili, Civil Envoronmental and Architectural
Engineering (CEAE),
University of Colorado at Boulder, Colorado, Boulder USA.
Area of Interest: Concrete dams; Fluid-structure-interaction;
Earthquake engineering; PBEE; Special structures
Giriprasath
Gururajan, Bartlesville Technology Center, ConocoPhillips
Company Oklahoma, Bartlesville, USA.
Area of Interest: Polymer, Vibrational Spectroscopy,
Electrospinning, Polymer characterization.
S.
P. S. Matharu, Mechanical Engineering Department, National
Institute of Technology, G.E. Road, RAIPUR, Chhattisgarh (C.G.) India
Area of Interest: Tribology of Rolling Element Bearings
(Mechanical Design Engineering).
Rajiv
Kumar Mandal, Department of Metallurgical Engg., IT-BHU
University/Department: Banaras Hindu University Department of Met.Engg.
IT-BHU Varanasi, Uttar Pradesh, India
Area
of Interest: Phase transformation,Nanomaterials,micrstructural
evolution,quasicrystals
Gurulingappa
M. Patil, Instrumentation Technology Department, Visvesvaraya
Technological University, Belgaum, Karnataka State, India
Area of Interest: Biomedical Instrumentation, Design of Data
Acquisition and Signal Processing Hardware for Electrocardiography
(ECG), Analysis of Electrocardiogram using Wavelets, Telemedicine during
emergencies and follow-up using TCP/IP on LabVIEW.
Goutam
Ghoshal, Department of Research and Development, Company: Acoustic MedSystem Inc, Savoy, Illinois, USA
Area of Interest: Biomedical ultrasound, therapeutic ultrasound, high-intensity focused ultrasound, signal processing, ultrasound imaging, computational mechanics, solid
mechanics, image-guided intervention, acoustic, ultrasonic non-destructive testing, mechanical stress analysis
Prof. M H Annaiah,
Mechanical Engineering Department, VTU/Mechanical Engineering, V H gardens,V H nagar, Nagasandra post,Bangalore-560073, Bangalore, Karnataka, India
Area of Interest: Materials/Machine Design/Composites
Dr.
T.R.Vijayaram, Professor in Mechanical Engineering, SMBS, School of Mechanical and Building Sciences, VIT University, Chennai Campus,
Vandalur-Kelambakkam Road, Chennai-600127, Tamilnadu, India
Area of Interest:
Foundry Technology, Special Casting Techniques, Squeeze Casting Technology, Near Net Shape Manufacturing, Ferrous and Nonferrous Metallurgy, Powder Metallurgy, NDT, Materials Characterization, Mechanical Testing of Materials, Quality Control Engineering, Metal Matrix Composites, Polymer Matrix Composites, Advanced Manufacturing Technology, Metrology, Fluid Mechanics, Machine Design, Applied Thermodynamics, Heat Transfer, Tribology, Heat Treatment of Metals and Alloys.
Dr.
Mohammad Mansoob Khan, Research Professor, Chemical Engineering, Yeungnam University, Geongbuk, Gyeongsan-si-712-749, South Korea
Area of Interest:
Green synthesis of nanomaterials, Band gap engineering, Metal oxides, Catalysis, Photocatalysis, Sensing, Microbial Fuel Cells.