|
Research India Publications
International Journal of Mechanics Solids (IJM&S)
Editorial Board Members:
Prof. Dr. Mohd Khanapi Abd
Ghani, Professor, Faculty of
Information and Communication Technologies, Universiti Teknikal Malaysia
Melaka, Malacca, Malacca, Malaysia
Dr. MARCO JAVIER
SUAREZ BARON, Professor, Assistant Research, , Calle 66 A # 9-36
Tunja Colombia
Dr. Mohit B.Diwan, Assitant Professor, Tatva Institute of Technological Studies, Modasa, Gujarat, India. Area of Interest : Manufacturing and Design & Development _
Jamil Abdo, Mechanical and Industrial Engineering Department, Sultan Qaboos University, P. O. Box 33, Al-koud 123, OMAN Area of Research/Interest: Friction-Induced Vibration, Elastic-Plastic contact Problems, micromechanics, Friction and Wear Control of Friction Induced Noise and Vibration in Vehicles and Machines.
Osama Abuzeid, Department of Mechanical Engineering, United Arab Emirates University, PO BOX 17555, Al Ain, UAE Area of Research/Interest: Advanced production techniques of metallic and non metallic thin films and their industrial applications.
Unal
Aldemir, Istanbul Technical University, Division of Applied
Mechanics, 34469 Maslak-Istanbul, Turkey
Whye-Teong Ang, Division of Engineering Mechanics, School of Mechanical and Production Engineering, Nanyang Technological University, 50 Nanyang Drive, Singapore 639790 Area of Research/Interest: boundary element methods, Green's function approach in mechanics, computational techniques and modeling of heat and mass transfer.
Gyula
Beda, Department of Applied Mechanics, Technical University of
Budapest, Hungary
James Boyle, Chair, Mechanical Engineering Department, University of Strathclyde, UK Area of Research/Interest:
Halil Ceylan, 482B Town Engineering Bldg., Iowa State University, Ames, IA 50011-3232 USA Area of Research/Interest: Pavement Analysis and Design, Computational Intelligence Applications/Information Technology in Civil Engineering, Materials and Construction Optimization of PCC Materials, Curling and Warping Behavior of Concrete Slabs.
David
Chelidze,
Mechanical Engineering and Applied Mechanics, 203 Wales Hall, 92 Upper College
Road, University of Rhode Island, Kingston, RI 02881 USA
Li Cheng, Department of Mechanical Engineering, The Hong Kong Polytechnic University, Hung Hom, Kowloon, Hong Kong Area of Research/Interest: Sound and vibration and, fluid-structure interaction, smart materials and structure, damage detection, control of solid and fluid systems.
Leon Cizelj, Institut "Jožef Stefan", Reactor Engineering Division, Jamova 39, 1000 Ljubljana, Slovenia Area of Research/Interest: Computational structural and fracture mechanics, Micromechanics and multiscale modeling, Probabilistic fracture mechanics and structural reliability.
Ottavia Corbi, Dip.Scienza delle Costruzioni, via Claudio 21, 80125 Napoli, Italy Area of Research/Interest: seismic engineering, structural dynamics,structural control, masonry structures.
Prabir Daripa, Department of Mathematics, Texas A&M University, College Station, TX-77843, USA Area of Research/Interest: Fluid/Solid Mechanics, Bio-Mechanics, Scientific Computing, and Applied Mathematics.
M. Dhanasekar (Sekar), Director - Centre for Railway Engineering, Central Queensland University, Rockhampton, QLD 4702, Australia Area of Research/Interest:
Mohammad Reza Eslami, Mechanical Engineering Department, Amirkabir University of Technology (Tehran Polytechnic), Hafez Ave. Tehran 15914 Iran Area of Research/Interest:
Vincenzo Gattulli, DISAT, Universitŕ di L'Aquila, 67040 Monteluco di Roio, L'Aquila, Italy. Area of Research/Interest: Dynamics and Earthquake Engineering, Nonlinear Dynamics, Computational Mechanics, Structural Identification and Reliability, Damage identification and health monitoring, Linear, Nonlinear and Adaptive Control Theory.
Somnath Ghosh, Department of Mechanical Engineering, Suite 255, 650 Ackerman Road, Columbus, OH 43202 USA Area of Research/Interest: Computational Mechanics with focus on materials analysis, characterization and processing, including simulation and design.
Abdul
Hayir, Istanbul Technical University, Civil Engineering Faculty,
Division of Mechanics, 34469, Maslak, Istanbul Turkey
Christian Hellmich, Vienna University of Technology, Institute for Mechanics of Materials and Structures, Karlsplatz 13/202, A-1040 Wien (Vienna) Austria Area of Research/Interest: biomechanics, continuum micromechanics, nano-to-macro scale transitions, multiphysics and multiscale problems, experimental and theoretical [bio]chemomechanics of concrete, steel, soil, rock, wood, bone.
Y.S. Ho, Department of Mechanical Engineering, The Hong Kong Polytechnic University, Hung Hom, Kowloon, Hong Kong. Area of Research/Interest: Hydrostatic Bearings, Active Magnetic Bearing System, Rotordynamics, Acoustic Emission, Flowmeter Modelling.
K. Jimmy Hsia, Department of Theoretical and Applied Mechanics, University of Illinois at Urbana-Champaign, 104 South Wright Street, Urbana, IL 61801 USA Area of Research/Interest: Mechanics at small length scales, material deformation and failure mechanisms, high temperature failure of materials, dislocations, dynamic fracture.
G.N. Jazar, 207A-RLC, Department of Mechanical Engineering, Manhattan College, Riverdale, NY 10471 USA Area of Research/Interest: Dynamics and Stability of MEMS and Mechatronics, Dynamics and Vibrations of Nonlinear Systems, Dynamics, Handling, Ride, and Stability of Vehicle, Chaotic Motions in Vibrating systems.
Norman Jones, Department of Engineering, The University of Liverpool, Brownlow Hill, Liverpool, England Area of research/Interest: Structural Crashworthiness, Dynamic Plastic Response of structures, Impact Behavior of Energy Absorbing Systems.
M. A. Karkoub, Mechanical Engineering Department, Kuwait University, P.O. Box 5969. Safat 13060. Kuwait. Area of research/Interest: Vibration control, Robotics, control of mechanical systems, application of artificial intelligence to mechanical systems.
Ahmed Adel Khdeir, Mechanical Engineering Department, College of Engineering, King Saud University, P. O. Box 800, Riyadh 11421, Saudi Arabia Area of research/Interest: Theories of Plates, Shells, Beams and Arches, Thermoelastic Behavior of Composite Structures, Stochastic and Dynamic Responses of Laminated Composite Structural Systems, Vibrations and Nonlinear Oscillations of Continuous and Discrete.
Vladimir
Kompis,
Faculty of Mechanical Engineering, University of Zilina, Univerzitna 1, Sk-010
26 Zilina, Slovakia
Christopher Y. Leung, Department of Civil Engineering, Hong Kong University of Science and Technology, Clear Water Bay, Kowloon, Hong Kong Area of Research/Interest: Construction materials, Mechanics of fiber composites, Fracture mechanics, Optical fiber sensors, Application of composites in civil engineering.
Zongjin Li, Department of Civil Engineering, Hong Kong University of Science and Technology, Clear Water Bay, Kowloon, Hong Kong Area of Research/Interest: Durability of concrete; development of high performance concrete; fiber reinforced concrete, fracture of concrete; nondestructive testing in civil engineering.
Yiu-Wing Mai, School of Aerospace, Mechanical and Mechatronic Engineering J07, The University of Sydney, Sydney, NSW 2006, Australia Area of Research/Interest: Fracture & Fatigue; Advanced Materials-polymer blends, composites, ceramics, construction materials, thin films and coatings; Tribology.
Herbert A. Mang, Vienna University of Technology, Institute for Mechanics of Materials and Structures, Karlsplatz 13/202, 1040 Wien, Austria Area of Research/Interest: Mechanics of deformable solids, structural mechanics, computational mechanics, computational acoustics, multifield analysis, multiscale analysis.
Mohammad
Megahed, CAPSCU,
Faculty of Engineering, Cairo University, Giza, P.O. 12163, Egypt
Ali Meghdari, Distinguished Professor of Mechanical Engineering, Vice-President of Academic Affairs, Sharif University of Technology, Tehran 11365, Iran Area of Research/Interest:: Kinematics & Dynamics of Multibody Systems, Robotics & Control, Mechanisms Design, Automated Manufacturing and Production; Dual-Arm & Flexible, Manipulator Dynamics, Mechatronics, Biomechanical Systems and Bio-Robotics.
Yoshihiro Narita, Div. of Mechanical Science, Graduate School of Engineering, Hokkaido University, N13 W8, Kita-ku, Sapporo, 060-8628 Japan Area of Research/Interest: Optimum design, Composite structure, Vibration and Buckling of plates and shells.
Tang-Tat (Percy) Ng, Department of Civil Engineering, University of New Mexico, Albuquerque, NM 87131 USA Area of Research/Interest: Computational Mechanics (Discrete Element, Finite Element, and Finite Difference), Constitutive Relations, and Dynamics.
K.K. Pathak, Scientist & Advisor, Computer Simulation & Design Group, Advanced Materials and Processes Research Institute (CSIR), Bhopal 462026 (MP) INDIA Area of Research/Interest: Computational solid mechanics, metal forming and casting simulations, structural shape optimization, artificial intelligence techniques.
Tasneem Pervez, Head, MIE Department, College of Engineering, Sultan Qaboos University, Oman Area of Research/Interest:
Fabrice Poirion, ONERA (French Aeronautics and Space Research Center), DDSS, 29 Ave de la division Leclerc, BP 72 ; 92322 Chatillon, France Area of Research/Interest: stochastic dynamics, nonlinear dynamics, Monte Carlo simulation techniques, structural uncertainty, nonsmooth mechanics.
John Price, Mechanical Engineering Department, Area of Research/Interest: Structural integrity including fracture mechanics, design, manufacture, welding, pressure and transport equipment, thermal shock, industrial explosions, risk assessment and maintenance.
K.R.
Rajagopal, 230A Engineering/Physics Building Office Wing, Texas
A&M University, College Station, TX 77843, USA
J.N. Reddy, Engineering Department, Texas A&M University, College Station, Texas, USA Area of Research/Interest: Formulation and analysis of problems in continuum mechanics, solid and structural mechanics, computational fluid mechanics, computational heat transfer, computational solid mechanics, and applied mathematics.
Jeremiah J. Rushchitsky, S.P.Timoshenko Institute of Mechanics of the National Academy of Sciences of Ukraine, Nesterov str. 3, Kyiv, 03680, Ukraine Area of Research/Interest: Mechanics of solids in several directions, mechanics of nano- and micro-composite materials, linear and nonlinear waves in materials with internal structure, visco- and piezo-elasticity, wavelet analysis as applied to wave propagation.
R. Seshadri, Memorial University of Newfound land, Canada Area of Research/Interest:
Jian-Fu Shao, Laboratory of Mechanics of Lille – Polytech-Lille, University of Sciences and Technologies of Lille, 59655 Villeneuve d'Ascq, Cedex, France Area of Research/Interest: constitutive law, plasticity, damage, numerical modeling, geomechanics, poromechanics.
Zbigniew H. Stachurski, Director, Centre for Science and Engineering of Materials, c/o Department of Enigneering, bldg 32 Australian National University, Canberra, ACT Australia Area of Research/ Interest: Mechanics and Solids.
James
J-S Stone, Mechanical Engineering &
Applied Mechanics, North Dakota State University, Fargo, ND 58105,
USA
Andras Szekeres, Dept. Applied Mechanics, TU Budapest, Muegyetem 5, H-1111, Budapest, Hungary Area of Research/Interest: Thermo-hygro-mechanics and its application to composites.
Gyorgy Szeidl,Department of Mechanics,University of Miskolc, Miskolc-Egyetmeváros, Hungary Area of Research/Interest: Nonlinear Solid Mechanics (Continuum Mechanics), micropolar theory of elasticity, boundary element method.
Ala Tabiei, Department of Aerospace Engineering, The University of Cincinnati, Post Box 210070, Cincinnati, OH 45221-0070 USA Area of Research/Interest: Smart composite material modeling for extreme deformation, strength, and experimental evaluation. Computational mechanics.
Derin N. Ural, Istanbul Technical University, Department of Civil Engineering, Geotechnical Division, Maslak 80626 Istanbul – Turkey Area of Research/Interest: Modeling soils and analyzing their behaviour during dynamic loading, wave propagation, vibrations, stochastic mechanics, and optimization.
Abdallah S. Wifi, Department of Mechanical Engineering, The American University in Cairo, Egypt Area of Research/Interest: Applied Plasticity and Metal Forming, Workability and Formability of Metals, Manufacturing Processes Engineering.
Volkmar
Zabel,
Bauhaus-University Weimar, Faculty of Civil Engineering, Institute of
Structural Mechanics, Marienstr. 15, 99421 Weimar, Germany
Mariusz
Ziejewski, Department of Mechanical Engineering, North
Dakota State University, Fargo, North Dakota 58105 USA
Prof Dr Zulkifli Yusop, Dean of Research Water Research Alliance UTM, Malaysia.
Tachtouch Bourhan, Department of Thermofluid Science. King Fahd University of Petroleum and Minerals. Dhahran 31261, Saudi Arabia.
Abdul Razak Rehmat, Associate Prof. Department of Polymer Engineering. Universiti Teknologi Malaysia. Skudai, Johor, Malaysia
M.
A. Habib, Professor, Mechanical Engineering Department,
Prof. Abdullah M. Al-Shaalan, EE department College of Engineering P.O. Box 800 King Saud University Riyadh-11421, Kingdom of Saudi Arabia
Adel Taha Mohamed Abbas, Associate Professor of Computer Aided Design& Manufacturing Mechanical Engineering Department, College of Engineering King Saud University , Riyadh, Saudi Arabia, 11421, P.O.Box 800
M. Venkata Ramana, Microscopy and Nano Tech Laboratory, Dept. of Metallurgical and Materials Engineering Indian Institute of Technology Madras Chennai 600 036, India
Damodar
Maity, Civil Engineering Department Indian Institute of Technology
Associate Professor, Civil Engineering Department, Indian Institute of
Technology, Kharagpur, West Bengal, India - 721302. West Bengal
Kharagpur 721302 India
Mohammad
Amin Horiri Ardebili, Civil Envoronmental and Architectural
Engineering (CEAE) University of Colorado at Boulder, Colorado, Boulder,USA
Pankaj,
Mathematics Indus International University
Bathu, Una Himachal Pradesh India Rajiv
Kumar Mandal, Department of Metallurgical Engg., IT-BHU
University/Department: Banaras Hindu University Department of Met.Engg. IT-BHU
Varanasi, Uttar Pradesh, India Area
of Interest: Phase transformation,Nanomaterials,micrstructural
evolution,quasicrystals
V.
Balakrishna Murthy, Mechanical Engineering Department, V. R.
Siddhartha Engineering College, Kanuru, Vijayawada, Andhra Pradesh, India
Jianlin
Liu, Department of Engineering Mechanics, China University of
Petroleum, No. 66, Changjiang West Road, Qingdao Economic & Technological
Development Zone, Qingdao, China
Dr.
P. Rathish Kumar, Civil Engineering Department, National Institute
of Technology (NIT) Warangal-506 004, Andhra Pradesh, India
|
|
© All rights are reserved with Research India Publications Home Journals Contact
|