Volume 20, Number 4 (2025)
CONTENTS
A Study on Disparity Map
Refinement Using a Two-Stage Morphological Filter
pp. 593-603
S. F. Abd Gani, M. F. Miskon, R. A. Hamzah and S. F. Pungot
Validation Utilisation of
Eggshell-Derived Calcium Oxide in Glass-Ceramic Composites: Evaluation
of Mechanical Strength and Ultrasonic Response
pp. 604-617
Z. Shamsudin, A. H. M. Dom, R. A. M. Osman and Mulyadi
Crack detection on steel
surface images through local thresholding method
pp. 618-633
Syafiq Iskandar Zamrul Ahmad, Nursabillilah Mohd Ali, Nurul Fatiha
Johan, Syahar Azalia Ab Shukor, Nur Asmiza Selamat and Rosli Besar
Selecting proton energy
degrader for irradiation research on structural materials in LEHIPA
pp. 634-643
A. P. Srivastava, Deepak K. Akar, H. K. Patni
Mitigating thermal motor
drift in high-throughput semiconductor handlers
pp. 644-657
Ahmad Harith Mohamad Ghazali, Nur Ezyanie Safie, Jefri Meser, Lee Ming
Huei, Ahmad Zubir Jamil
Recognition of Partially
Occluded Human using Vision and Classifiers System
pp. 658-676
Nurul Fatiha Johan, Wong Boon Heng, Nursabillilah Mohd Ali and Syahar
Azalia Ab Syukor Rosli Besar
Development of
Non-Inverting Buck-Boost Converter with PID Controller
pp. 677-691
Mohd Badril Nor Shah, Nor Ain Syafiqah Nabila Che Jusoh, Muhammad Iqbal
Zakaria and Norhaslinda Hasim
Automated Classification of
Ischemic Stroke Progression Using MRI-SWI and Hybrid SVM-Bagged Tree
Approach
pp. 692-707
Abdul Rahim Abdullah, Shaarmila Kandaya, Norhashimah Mohd Saad, Ezreen
Farina Shair, Ahmad Sobri Muda
Hydromagnetic Radiative
Oscillatory Free And Forced Convective Flow Past A Vertical Plate In
Slip Flow Regime With Thermal Diffusion And Periodic Plate Temperature
pp. 708-723
Rituparna Saikia and Deepjyoti Kalita
Dynamic Analysis of Road
Surface Roughness on Vehicle Occupants in the State of Kuwait
pp. 724-733
Farraj Aldaihani,
Jasem Alrajhi, Khaled Alhaifi and N. Alhaifi
Grinding Parameters
Optimization for Carbide Cutting tools using Response Surface Method
pp. 734-740
Muhammad Hariz Zuhairi bin Mohd Arif, Nor Ana binti Rosli, Mohd Hadzley
bin Abu Bakar, Mohamad Nordin Mohamad Norani
Artificial Neural
Network-Based Modelling of Ultrafiltration Process: A Study on Flux and
Transmembrane Pressure Prediction
pp. 741-752
Mashitah Che Razali, Norhaliza Abdul Wahab, Noorhazirah Sunar, Azavitra
Zainal and Nur Hazahsha Shamsudin
Development of Water
Quality Monitoring System at the off-River Storage by Using IOT
Technology
pp. 753-765
A.N. Ramani, M. N. M. Nasir, M. F. K. A. Jalil, W. M. Bukhari, Z. H.
Bohari and S. N. M. Arshad
Adaptive Technology on
Pedestrian Crossing for Young Student with Disabilities
pp. 766-774
Aziah Khamis, Ikmal Fathullah Irman, Mohd Fakhajudin Jumaah
A Framework-Guided
Development of a 2D Platformer Game: Usability and Insights from Player
Evaluation
pp. 775-787
Farah Nadia Azman, Siti Nur Athirah Binti Fauzi and Abdul Syafiq Bahrin
Development and Evaluation of
a Mobile Expense Tracker Application for Enhanced Personal Financial
Management
pp. 788-803
Muhammad Murshid Bin Zainudin, Aniza Binti Othman, Tengku Siti Meriam
Binti Tengku Wok
Enhancing Smart
Centralized Mail Management: A Dual-Action System Integrating Automated
Notification and Hygienic Security
pp. 804-811
Azman Awang Teh, Muhamad Syafiq Izzat Bin Abdul Razak, Nor Hafeizah
Hassan
Properties of Hydroxyapatite
Prepared from Cockle Shells by Mechanical Milling for Biomaterials
Applications
pp. 812-822
A. H. M. Dom, M. F. Marudin, Z. Shamsudin and Mulyadi
Analysis of Path Density
Effects on Joint Velocity Profiles and Accuracy in Continuous-Path
Robotic trimming process for Carbon Fiber Reinforced Polymer based
product
pp. 823-836
M. R. M. K. Anuar, R. Abu Hanifah, M.K. Mohamed Nor, S. A. Mohd Sàat,
M.A. Syafi, N. Norhellme, S.A. Rashidi
Comparative Modeling of Linear
and Nonlinear Dynamics for an Overhead Crane System
PP. 837-846
R. Kogulan, H.I. Jaafar, N.M.H. Norsahperi and F.I. Md Noor
Assessment of Physical
Product Design Through Consumer Perceptions
pp. 847-859
Rosidah Jaafar, Hambali bin Arep, Effendi bin Mohamad, Jeefferie bin Abd Razak,
Zolkarnain bin Marjom
Effect of Temperature and
Precursor Concentration on Morphology and Crystallinity of Nickel
nanoparticle
pp. 860-869
S. R. Shamsuri, U. R. Mohammed Mydeen, A. B. Hadzley, S. Ismail, A.H.M.
Dom
Analyzing Consumer Reviews
Using Machine Learning
pp. 870-877
Safa Khalid Al Sarayrah
IoT Smart Power Socket for
Residential Electrical Control and Energy Awareness
pp. 878-889
M. Manap, M. H. Jopri, N. A. Ngatiman, M. H. Harun, S. F. Abd Gani and
N. Mohamed Motari
Optimization of
Manufacturing Strategies and Machining Conditions for the Finishing
Process of a Propeller Blade Mold
pp. 890-904
Zolkarnain Marjom, Muhamad Syahmi Sopian and Syahrul Azwan Sundi@Suandi