|
| |
International Journal of Applied Engineering Research (IJAER)
Volume 10, Number 93 (2015) Special Issues
CONTENTS
Experimental
investigation of flat slabs against punching shear
pp.1-4
Meenu Mohan, A S Santhi and G.Mohan Ganesh
Corrosion resistant
Concrete using supplementary cementitious materials
pp.5-9
Nishant A. Nair, G. MOHAN GANESH and A.S. SANTHI
Behaviour of precast
concrete wall panels
pp.10-14
Akruth K, A S Santhi and G.Mohan Ganesh
Mechanical Behavior of
Self Compacting Concrete as a Partial Replacement of Fine Aggregate with
Quarry Dust and Marble Powder
pp.15-21
Maipalsingh Devda, G. Mohan Ganesh and A. S. Santhi
Behaviour of
self-compacting concrete using micro steel fibre
pp.22-26
Shaik Madeena Imam Shah, G. Mohan Ganesh and A.S. Santhi
Time History Analysis of
Flat Plate Multi-Storey Frame System under Earthquake Load
pp.27-32
BhaveshGagrani, Santhi A.S and G. Mohan Ganesh
A Review on behavior of
rcc beam exposed at elevated temperature A STATE OF ART OF REVIEW
pp.33-38
J.Anita Jessie and A.S.Santhi
Utilization of Bottom
Ash in SCC as Fine Aggregate
pp.39-43
P.Sukumar, G.Mohan Ganesh and A.S.Santhi
A review on the
behaviour of fiber reinforced blended cement concrete under impact
resistance
pp.44-49
S. Janani and A.S. Santhi
Self compacting concrete
blended with Fly ash exposed to elevated temperatures
pp.50-55
P.Sai mahesh chandra, G.Mohan ganesh and A.S.Santhi
Study on the properties
of polypropylene fibre reinforced concrete
pp.56-60
Chippy Maria Varghese, G.Mohan Ganesh and A.S.Santhi
Mechanical properties of
steel fibre reinforced concrete with partial replacement of fly ash and
micro silica
pp.61-65
S.Balaji, G.Mohan Ganesh and A.S.Santhi
Micro-steel fibre
reinforced Self -compacting concrete A state of the art of review
pp.66-73
V.Athiyamaan and G.Mohan Ganesh
Study on Self
CompactingConcrete: A STATE-OF-ART-OF-REVIEW
pp.74-78
Peerzada Danish and G. Mohan Ganesh
Composite steel-concrete
columns Experimental Investigation by varying Number of Struts and Type
of Encasing
pp.79-87
Mohan Ganesh G. and Junaid Nabi
Comparative analysis of
seasonal shoreline changes in nagapattinam coast using recent geomatics
techniques
pp.88-91
Balasaraswathi P, Kumaran V and S.Srinivasalu
Replacement of sand by
bottom ash from neyveli and mettur thermal power stations
pp.92-98
J .Vidhya nandhini and S.Jaya pradeep
Experimental Study On
Granite Dust Brick
pp.99-103
S.Jaya pradeep and V.Scinduja
Numerical investigation
of cold formed steel rigid connected elements of stiffened I-section
under axial compression
pp.104-109
Pradeep T and Karthika R
Spatial mapping of water
use efficiency in sathanur reservoir catchment, india
pp.110-115
K.Banupriya and E.S.Dinesh Babu
Experimental Study on
Durability Characteristics of High Performance Concrete
pp.116-120
T.R.Raghavan and K.L.Ravisankar
SEISMIC RESISTANCE OF
STEEL-CONCRETE COMPOSITE STRUCTURES
pp.121-124
G.Mohan Ganesh and P.Sumanth
Evaluation of ductility
factor for special moment resisting RC frames
pp.125-131
Nishanth.M and Visuvasam.J
GRANITE WASTE AND FLYASH
USED AS ADMIXTURE IN THE BRICKS
pp.132-135
Suresh .S, Ravi. E and Sarathkumar.S.C
Buildability assessment
in indian construction industry
pp.136-140
A.Sujitha Rekha and K.Thirumalai Raja
Assessment of
physico-chemical parameters of groundwater in avinashi-tirupur region,
tamilnadu, india
pp.141-146
Rajesh Kumar A, Ravichandran P, Arumugam K and Elangovan K
An examination of
influence of TQM principles implementation in construction industries
--an Indian perspective
pp.147-153
S.Deepika, S.Anandakumar and V.Krishnamoorthy
Ranking of factors
affecting quality in construction
pp.154-157
K.S.Shobana and D.Ambika
An experimental study on
factors affecting human resource management among labors in construction
industries
pp.158-162
S. Sharmila and K.Nirmalkumar
Factors influencing
crisis management in construction projects
pp.163-166
N. P. Srinivasan and N. Nandhini
Enforcing an effective
procurement management system in construction projects
pp.167-171
M.Vignesh, A.Sivakumar and Viswanathan Rajeshkumar
Behavior of steel fiber
reinforced concrete under elevated temperature
pp.172-177
Satyajit Telang, A.S. Santhi and G. Mohan Ganesh
Behaviour of high rise
building under different patterns of bracing
pp.178-182
Sawan Kasliwal, Santhi A.S and G.Mohan Ganesh
Effect of Phase Change
Materials on V-Trough Solar Air Heater for Drying Applications
pp.183-186
Shamanthkumar K.R, Moiz Pasha Patil and M. Eswaramoorthy
A Review on Solar
Photovoltaic-Thermoelectric Generator (Hybrid) System with and without
Latent Heat Effects
pp.187-190
Senthil Prasad Mathiyalagan, M. Prabaharan and M. Eswaramoorthy
Study on Structural
Analysis of Connecting Rod and Crank Shaft Bearings
pp.191-194
S.Dharani Kumar, M.Thanga logesh, T.Kasirajan and C.Selva Senthil
Mass Optimization of
Mixed Flow Pump Impeller Blade based on Thermal and Structural Loading
Conditions Blade Designed Using Mean Stream Line Theory
pp.195-198
Divya Zindani, Apurba kumar Roy and Kaushik kumar
Review of Titanium
alloys and Steel Brazing methods
pp.199-203
Anil Kumar. S. V and R.Gandhinathan
A Review of
Computational Fluid Dynamics Application on Photovoltaic –
Thermoelectric Generator Hybrid System
pp.204-207
M. Prabaharan, Senthil Prasad Mathiyalagan and M. Eswaramoorthy
Self Healing Capsules
pp.208-213
J. Jensin Joshua and R. Mukesh
Investigation on spot
weld ability of Aluminium-Interstitial Free Steel joints
pp.214-218
R.Gowri Manohar and S.Vignesh
Optimisation on Wear
Process Parameters of Hybrid Metal Matrix Composite using Taguchi method
pp.219-224
S. Dhanalakshmi, P.G Venkatakrishnan, V. Karthik and N.Mohanasundararaju
Comparison of Heat
Transfer and Pressure Drop Characteristics of Double Cross Flow and
Staggered Flow Shell and Tube Heat Exchangers
pp.225-231
Charan Kumar D.P and Krishnan A.S.
Analysis of Heat
Transfer and Pressure drop in Pebble Bed and Cored Brick Regenerators
pp.232-238
aKrishnan A S, Aravindh A, Thanaram T, Sriram Aravindh K A and eNaveen S
J
Experimental analysis of
sun point collector for solar cooking applications
pp.239-242
Prabaakaran.Ua, Rajeshkumar.G, Sakthivadivel.D, and S.Iniyan
Simulation and Analysis
of Chemical Looping Gasification using MATLAB and FACTSAGE
Stoichiometric and Non-Stoichiometric Equilibrium modelling approaches
pp.243-247
J.Ananthanarasimhan and E.Natarajan
Experimental
investigation of Effect of Tool Pin Profile in Friction Stir Welding of
AA6063 Pipes
pp.248-251
S.M.Senthil and R.Parameshwaran
Investigation on
Combustion and Emission Analysis in a CI Engine Using CFD
pp.252-260
Ramachandran N, Kalil Rahiman M and Manikalithas P
Automatic Lid Controller
For Laptop Using Microcontroller
pp.261-263
S. Mohankumar, V.K. Gobinath, D.R.P. Rajarathnam, D. Jayanth, P. Sathish
Kumar and P. Nandagopal
Smart Robot for Coconut
Maturity Level Identification and Harvesting using Embedded Linux
pp.264-269
S.Maheswaran, S.Sathesh, P.Sivaranjani, B.Vivek and P.Priyadharshini
Digital Image Processing
approach for leaf identification
pp.270-275
P.Suganthi, G.Rajeshwari, D.Binupreena and K.Preethi
Green Synthesis of
colour tunable green luminescence in Mn2+ doped ZnAl2O4 nanoglass
ceramics
pp.276-282
S. Ponkumar, H.BRamalingam, D.Prakashbabu, R. Harikrishna, K. Janaki and
K. Munirathnam
Review paper on
simultaneous reduction techniques of SO2 and NOx gases from industrial
boilers
pp.283-287
C. Maheswari, R. Vinoth, B. Meenakshipriya and V. Arun kumar
Stabilization of Single
Stage Inverted Pendulum using Multi-loop PID Controller
pp.288-292
B.Meenakshipriya, M.Prakash, C.Naveen and C.Maheswari
Improvement of Case
Hardening Depth in Camshaft Based on Process Parameters Optimization by
Response Surface Methodology (RSM)
pp.293-297
N.Muralidharan, T.Malarkodi, C.Swathi Vevekanantham, A.Shanmugasundaram,
B.Ponmani and R.Ragaventhiran
Design and Comparison of
Intelligent Controllers for a Boiler Drum Level System
pp.298-303
D.Dinesh Kumar, B.Meenakshipriya and S.Sakthiya Ram
Enhancement Of Hybrid
Image Watermarking Algorithm Using Humanvisual System Modelbased On
Discrete Wavelet Transform
pp.304-306
V.Sundhararaj and B.Meenakshipriya
Performance analysis of
capacitive micro-accelerometer
pp.307-312
Naveen.P, Gomathi.K and Senthilkumar.A
Control of Ball and Beam
system using Sliding Mode Control
pp.313-317
Dhanalakshmi D, Sathiyavathi S and Lakshmanan S
Design and Modeling of
an Electro- Hydraulic Servo System For Hydraulic Presses
pp.318-322
Venkatesa Prabu D, Tony Thomas A and Parameshwaran R
Synthesis and
Characterisation of Pure and Dye Sensitised TiO2 for Solar Cell
applications
pp.323-327
Basil. M. Kuriakose, N. Nithyavathy, K. Suganeswaran, C. Naveen,
S.Arunmetha, V. Rajendran
Extension of Useful Life
Period of Photovoltaic Modules
pp.338-333
E.Suresh Kumar, Bijan Sarkar and Subhija.E.N.
Control of a non-linear
system using IMC-PID controller
pp.334-338
K.M.Nandhini, S.Kaushik, A.Jagadeesan and P.Jamuna
Simulation of Robotized
Material Handling Systems For Packaging Section of An Industry In
Virtual Environment (Virtual Factory Simulation)
pp.339-343
Praveen Kumar V and Arun Kumar K
[UP]
| |
|