Editorial Board Members of IJAER

Zaki Ahmad, Department of Mechanical Engineering, KFUPM, KFUPM Box # 1748, Dhaharan 31261 Saudi Arabia

Area of research/interest: Advanced Materials, Corrosion and Corrosion protection of materials, Surface Engineering.

Rajeev Ahuja, Physics Department, Uppsala University, Box 530, 751 21 Uppsala Sweden

Area of research/interest: Computational Materials Science, Electronic Materials, Spintronics, High pressure, Dynamics, Melting.

Shigeru Aoki, Department of Mechancial Engineering, Tokyo Metropolitan College of Technology, 1-10-40 Higashi-Ohi, Shinagawa-ku, Tokyo 140-0011, Japan
Area of research/interest: Random vibration, Seismic response of mechanical system, Approximate analysis of nonlinear vibration, Utilization of vibraion.

Osama Badr, Mechanical Engineering Department, Qatar University, P.O. Box 2713, Doha, QATAR
Area of research/interest:

Sayavur I. Bakhtiyarov, New Mexico Institute of Mining and Technology, Mechanical Engineering Department, 122 Weir Hall, 801 Leroy Place, Socorro, NM 87801-4796, USA
Area of research/interest: non-Newtonian fluid mechanics, heat and mass transfer, rheology, metalcasting, materials processing, multiphase flows.

Fatma Abou-Chadi, Head of the Dept. of Electronics and Communications Engineering, Faculty of Engineering, Mansoura University, Egypt
Area of research/interest:

Ching-Yao Chen, Dept. of Mechanical Engineering, National Yunlin University of Science & Technology, 123, Section 3, University Road, Touliu, Yunlin, Taiwan, 640 R.O.C.
Area of research/interest: Biofluid mechanics, thermo-fluid mechanics, Magnetic fluids, Computational fluid dynamics.

G.Q. Chen, Department of Mechanics and Engineering science, Peking University, Beijing 100871, China
CFD(Computational fluid dynamics),energy and resources engineering, and systems ecology.

B.T.F. Chung, Department of Mechanical Engineering, University of Akron, Akron, Ohio 44325 USA

Area of research/interest: Heat Transfer with Phase Changes, Optimum Design of Extended Surfaces, Radiative Heat Transfer System, Heat Transfer in Polymers.

Tariq Darabseh, Mechanical Engineering Department, JUST P.O. Box 3030 Irbid 22110 Jordan
Area of research/interest:

Nihad Dib, Electrical Engineering Department JUSTP. O. Boc 3030, Irbid 22110 Jordan
Area of research/interest: Computational Electromagnetics, Microwave Circuits, Antennas.

Marcelo J.S. De Lemos, Departamento de Energia - IEME, Instituto Tecnologico de Aeronautica - ITA, 12228-900 Sao Jose dos Campos - S.P. - Brazil
Area of research/interest: Turbulence Modeling, Porous Media, Combustion in Porous Media, Numerical Methods, Finite Volume.

Dimitris Drikakis, Head of Aerospace Sciences Department, Cranfield University, School of Engineering, Cranfield, Befordshire, MK43 0AL, United Kingdom
Area of research/interest: Computational Fluid Dynamics, Aerodynamics, Turbulence Gas dynamics, omputational Nanotechnology, Microflows Biofluid Mechanics, Transport Phenomena.

M.R. Eslami, Department of Mechanical Engineering, Amirkabir University of Technology, Hafez Ave. Tehran, 15914 Iran
Area of research/interest: thermoelasticity, plasticity, cyclic loading, structural instability, buckling.

A.S. Al-Harthy, Department of Civil, Surveying and Environmental Engineering, University of Newcastle, Callaghan, NSW 2308 Australia.
Area of research/interest: Concrete material and durability, Recycling construction materials, reliability assessment of structures.

F. Hayati, Dean, Faculty of engineering, Ajman university of Science & Technology Network, Ajman, UAE

Annette Bussmann-Holder, Max-Planck-Institute for Solid State Research, Heisenbergstr. 1, D-70569 STUTTGART, Germany

M.Y. Khalil, Nuclear Engineering Department, Faculty of Engineering, Alexandria University, Alexandria 21544 Egypt
Area of research/interest: Radiation measurements and applications, Nuclear materials, Nuclear waste management, and radiation damage.

Bashar El-Khasawneh, Chairman, Industrial Engineering Department, JUST, P.O. Box 3030, Irbid 22110 Jordan

Area of research/interest: Design process and manufacturing-related sciences and processes, advanced and parallel kinematics machine tools and mechanisms.

Y.A. Khulief, Department of Mechanical Engineering, KFUPM Box 1767, Dhahran, 31261, KSA

Area of research/interest: Dynamic modeling and analysis of multibody systems with interconnected rigid and elastic Components, Dynamics of impact and intermittent motion, FEM dynamic response analysis of rotating beams & shafts.

Kazuhiko Kudo, Laboratory of Micro-Energy Systems, Division of Human Mechanical Systems and Design, Graduate School of Engineering, Hokkaido University, Japan
Area of research/interest: Radiative heat transfer analysis, transient analysis on surface tension.

G. A. Mansoori, Department of Chemical and Bio Engineering, University of Illinois at Chicago, 851 S. Morgan St. (M/C 063), Chicago, IL 60607-7052 USA

A. A. Mohamad, Director of Graduate Studies, Dept. of Mechanical and Manufacturing Engineering,

Ihab Obaidat, Department of Physics, UAE University, PO Box 17551, Al-Ain, UAE

Area of research/interest: semiconductor band engineering and semiconductor interfaces.

H.M. Omar, Department of Aerospace Engineering, KFUPM, P.O. Box # 1794, Dhahran, 31261 Saudi Arabia

Area of research/interest: Dynamics and Control of Flight Vehicles, Guidance, Industrial and Applied Control, Active Vibration Control, Intelligent Control Systems, and Flight Structure.

K.K. Pathak, Scientist & Advisor, Computer Simulation & Design Group, Advanced Materials and Processes Research Institute (CSIR), Bhopal 462026 (MP) INDIA

Area of research/interest: Computational solid mechanics, metal forming and casting simulations, structural shape optimization, artificial intelligence techniques.

Huihe QIU, Department of Mechanical Engineering, The Hong Kong University of Science and Technology, Clear Water Bay, Kowloon Hong Kong

Area of research/Interest: Transport phenomena in microscale multiphase flows, mciro sensors and actuators, optical diagnostics and instrumentation.

K. R. Rajagopal, Forsyth Chair Professor, Department of Mechanical Engineering, Texas A&M University, 3123 TAMU, College Station TX 77843-3123, U.S.A

D. Ramkrishna, Associate Head School of Chemical Engineering, Purdue University, IN 47907-2100 USA
Area of research/Interest: application of mathematics to solving problems in chemical and biochemical reaction engineering.

Allan Runstedtler, Natural Resources Canada, CANMET Energy Technology Centre - Ottawa, 1 Haanel Drive Ottawa, Ontario K1A 1M1 Canada
Thermal radiation heat transfer, Computational Fluid Dynamics modeling of combustion, Design of combustion and heat transfer systems.

Ismail Shahin, Electrical and Computer Engineering Department, University of Sharjah, P. O. Box 27272, Sharjah, United Arab Emirates
Area of research/Interest:

Ashraf Shikdar, Department of Mechanical & Industrial Engineering, S.Q. University, P.O. Box 33, Al-Khod 123 Oman

Area of research/Interest: Ergonomics/ Human Factors, Worker performance, Occupational Health and Safety.

S.A. Soliman, Electrical Engineering Department, University of Qatar, P. O. Box 2713 Doha Qatar

Area of research/Interest: Applications of State Estimation to Electric Power Systems, Fuzzy and Neural System Applications to Electric Power Systems, Reactive Power Control.

JinHo Song, Thermal-hydraulics and Reactor Safety Research Division, Korea Atomic Energy Research Institute, P.O. Box, 105, Yusong, Taejon , 305-600, Korea
multi-phase fluid mechanics and heat transfer, nuclear reactor safety, and power plant operation and design.

Area of research/Interest: Combustion process and pollutant formation in internal combustion engines and combustion diagnostics by optical techniques

Dimitri V. Val, Dept. of Structural Engineering and Const. Manag., Faculty of Civil and Environmental Engineering, Technion - Israel Institute of Technology, Haifa 32000, Israel
Area of research/Interest: structural safety and reliability; analysis, design, and assessment of reinforced concrete and steel structures; probabilistic risk assessment and management.

Guo-Xiang Wang, Department of Mechanical Engineering, The University of Akron, Akron , OH 44325-3903 USA

Area of research/Interest: Heat and Mass Transfer, Materials Processing, Solidification Theory and Application.

Huimin Xie, Dept. of Engineering Mechanics, Tsinghua University, 100084 Beijing, China
Area of research/Interest: Experimental Mechanics, optical metrology.

Mohamed Younes, Mechanical Engineering Department, Faculty of Engineering, UAE University, P.O. Box 17555, Al-Ain, UAE

Area of research/Interest: Internal Combustion Engines Fuels, Internal Combustion Engines Cooling, CFD Simulation of Internal Combustion Engines.