Volume 7, Number 12, (2012)

CONTENTS

New correlationsfor predictingthe quality of waste lube oil and recovery after acid-clay treatment
pp. 1343-1351
Author: Abeer M Shoaib

Comparison between Proposed Model and Experimental Model of a Single Phase Transformer Using MATLAB/SIMULINK
pp. 1353-1358
Authors: Er.Rajat Kamboj, Er.Vivek Pahwa and Er. Gagan deep

Investigation of Dynamic Response of Bolted Joint Test Rig Under Free Vibrations Using FEA.
pp. 1359-1370
Authors: Mayuri Saxena, Kartikeya Tripathi and Husain Kanchwala

Multi-layer and Multi-objective Criteria Decision-Making Model with Preference Information
pp. 1371-1378
Authors: Jun Ye and Xian-Jun Zhang

Analysis of Load Deflection Characteristics of Wave Washer Spring Using 3D CAD Modeling
pp. 1379-1389
Authors: Nidhi Gaur, Dr.KartikeyaTripathi and Husain Kanchwala

Investigation of the Penetration Capability of an Axi-Symmetric Cross Jet in a Turbulent Fluid Flow through a Circular Pipe
pp. 1391-1405
Authors: Snehamoy Majumder, Debajit Saha and Pritam Das

Comparison between Proposed Model and Experimental Model of a Single Phase Transformer Using MATLAB/SIMULINK
pp. 1407-1412
Authors: Er. Rajat Kamboj, Er. Vivek Pahwa and Er. Gagan deep

Artificial Bee Colony Algorithm for Optimal Reactive Power Dispatch
pp. 1413-1420
Authors: M. Ettappan and Dr. M. Rajaram

Power System Analysis & Stability using Matlab Toolbox (PSAT)
pp. 1421-1428
Authors: Miss. Jagruti C. Patil and Prof. D. S. Chavan

Flow and Conjugate Heat Transfer Characteristics in a Rotating Disk Cavity with through-Flow
pp. 1429-1441
Authors: Dr. K.E. Reby Roy and K. Madhusoodanan Pillai

Conjugate Heat Transfer Characteristics of Confined Flow in a Rotating Disk Cavity
pp. 1443-1456
Authors: K. Madhusoodanan Pillai and Dr. K. E. Reby Roy

Experimental Investigation and Optimization of Material Removal Rate on Electric Discharge Machine for EN-19 Alloy Steel using Copper Electrode
pp. 1457-1467
Authors: Manish Vishwakarma, Vishal Parashar and V.K. Khare

Performance and Exergy Analysis of Counter Flow Vortex Tube with Different Diameter of Orifice
pp. 1469-1477
Authors: Prabakaran Jayaraman and Vaidyanathan Subaiya

Preliminary Studies on the Three Dimensional Characteristics of Quarry Dust Concrete
pp. 1479-1492
Authors: A.Krishnamoorthi and G. Mohan Kumar

Effect of Area Ratio and Inlet Swirl on the Performance of Annular Diffuser
pp. 1493-1506
Authors: Manoj Kumar, B.B. Arora, Subhashish Maji and S. Maji

Implementation of the Protocol Analyzer for USB 1.1 Device Model
pp. 1507-1511
Authors: Er. Sanjeev Kumar, Er. Gagan Deep and Er. Sulabh Srivastava

Investigation of Dynamic Response of Bolted Joint Test Rig under Free Vibrations Using FEA.
pp. 1513-1524
Authors: Mayuri Saxena, Kartikeya Tripathi and Husain Kanchwala

Analysis of Load Deflection Characteristics of Wave Washer Spring using 3D CAD Modeling
pp. 1525-1535
Authors: Nidhi Gaur, Dr. Kartikeya Tripathi and Husain Kanchwala

Synthesis of Planar Adjustable Six Bar Mechanism with Rocker as Output Link
pp. 1537-1543
Authors: C.M. Veerendrakumar and Dr. V.B. Math

Evaluation of Proctor Properties of Compacted Soils Using Genetic Programming
pp. 1545-1550
Authors: Shahid Noor and Amardeep Singh

GA Based LQ Rusing Absolute Deviation Objective Function for an Inverted Pendulum
pp. 1551-1561
Authors: Dr. J. Abdul Jaleel, Nasar A. and Riya Mary Francis

Study of Thermoeconomic Analysis

pp. 1563-1567

Authors: Rajat Pardal, B.B. Arora and Subhashish Maji

Solar Agricultural Dryer Design for Fruits and Vegetables
pp. 1569-1573
Authors: Thameed Aijaz