|
| |
International Journal of Applied Engineering Research (IJAER)
Volume 10, Number 78 (2015) Special Issues
CONTENTS
Computational Analysis Of
Multi Cylinder S.I. Engine Intake Manifold For Power Improvement
pp.1-5
Ujjwal Verma, Tushar Tanwar, Rohit Singh and Abhinav Gupta
Corrosion inhibition of
aqueous extract of Garcinia indica for 6063 aluminium alloy in 2.0 M
phosphoric acid solution
pp.7-12
Deepa Prabhu and Padmalatha
Impact of Process
Parameters on Surface Roughness in Elastomer Machining
pp.13-17
Rajesh Nayak and Raviraj Shetty
Effect of SiC particulate
reinforcement on the precipitation hardening behavior of two step stir
cast Al 6061 alloy
pp.18-24
Gowri Shankar M.C, Achutha Kini U, S S Sharma and P. R. Prabhu
Influence of aging
temperature and aging time on the mechanical property and microstructure
during precipitation hardening of Al 6061 alloy
pp.25-31
Gowri Shankar M.C, Achutha Kini U, S S Sharma and P. R. Prabhu
Flexural Properties of
Polylactic Acid Components Fabricated using 3D Printing Technique
pp.32-35
Rajesh Mathivanan N, Raghupathy V.P. and Aveen K. P
Analysis of machining force
during milling of CFRP and GFRP composite laminates
pp.36-40
Rajesh Mathivanan N, Mahesh B. S and Anup Shetty. H
Wear and strength
characteristics of manganesealloyed austemperedductile iron (TSADI) by
two-step austemperingprocess
pp.41-45
D.Sethuram and K.Narasimha Murthy
Characterization of
Polymeric material from nanoindentation creep test data
pp.46-49
Swet Chandan
Mechanical Characterization
of Bio-composites: A review
pp.50-53
Vijay Chaudhary, Parmendra Kumar Bajpai and Sachin Maheshwari
Turn-assisted Deep Cold
Rolling: An Innovative Manufacturing Method for the improvement of
fatigue life
pp.64-68
P. R. Prabhu, S. S. Sharma, S. M. Kulkarni and Gowrishankar M. C
Graphical analysis of
Vibratory bowl feeder using channel shaped sheet metal components
pp.69-73
Ankita Verma, Anjali, Pradeep Khanna and Sanjay Gupta
Experimental Investigation
and Analysis of Laser Cutting Process Parameters
pp.74-77
V.Senthilkumar, M.Thilak, N.Periyasamy and A.Manigandan
Selection of optimum
process parameters using ARAS method
pp.78-81
B.Singaravel and T.Selvaraj
WEAR BEHAVIOUR OF
ALUMINUM-BORON CARBIDE COMPOSITES UNDER LUBRICATED CONDITION
pp.82-84
Sanman S, Anilchoudary R, Akhil N and K V Sreenivas Rao
Experimental
Investigationof Corrosion BehaviorofAl2O3-40wt%TiO2 Coatingon AISI-410
Grade Steel
pp.85-89
Girisha.K.G, Sreenivasrao K V and Ramesh C.S
Effect of Variation of
Thickness on Tensile & Flexural Properties of GFRP & CFRP Composites
pp.90-94
Sunith Babu L and H. K. Shivanand
Optimization of Weld Bead
for Rutile Based Flux Constituents by Taguchi Analysis in Submerged Arc
Welding
pp.95-98
Aditya kumar
Effect of aiding buoyancy
on the wake characteristics of a semi-circular cylinder
pp.99-103
S. K. Singh and Priya Choubey
Evaluation of Mechanical
Properties of Sisal Fiber-Epoxy resin- Pulp of Samanea saman Pod Hybrid
Composite
pp.104-107
Akash, Anil K Chikkanna, K V Sreenivas Rao and N S Venkatesha Gupta
Tensile Properties of 3D
printed PLA components- under various test conditions
pp.108-112
K.G. Jaya Christiyan, U. Chandrasekhar and K. Venkateswarlu
Evaluation of Mechanical
Properties of Epoxy Resin and Alkaline Treated Sisal and Flax Fibers
Reinforced Composites
pp.113-116
Akash, Anil K Chikkanna, K V Sreenivas Rao and N S Venkatesha Gupta
DESIGN AND DEVELOPMENT OF
MULTI-CAVITY AND MULTI PRODUCT CASTING PROCESS
pp.117-121
Anil Kumar and Gagan Baradi
Analysis of surface
roughness, micro hardness and degree of work hardening in turning of
HSLA steel
pp.122-125
B.Singaravel and T.Selvaraj
Wear and Hardness studies
on multiwalled carbon nanotube reinforced copper composite
pp.126-130
Vishwanath Koti and Raji George
Mineral Characterization of
Indian Coal
pp.131-135
Mani Kanwar Singh, Satish Kumar and Dwarika Nath Rath
Erosion Wear Analysis of
Slurry Piping Materials Using Taguchi Technique
pp.139-139
Gurprit Singh, Satish Kumar and S K Mohapatra
EXPERIMENTAL INVESTIGATION
OF ALUMINIUM MATRIX COMPOSITES REINFORCED BY SiC PARTICLES FABRICATED
THROUGH ULTRASONIC ASSISTED STIR CASTING PROCESS
pp.140-145
ANUJ SHARMA
Vibration Analysis of Rotor
Mounted on Flexible Bearings
146-148
Md. Firoj Anwar and Sankha Bhaduri
ROAM- Realistic Obstacle
Avoidance Mobility Model
pp.149-154
Hannan Syed Shah and Himanshu Sharma
Review on the Use of Piezo
Sensors for Structural Health Monitoring, Energy Harvesting and Bio
Mechanical Applications
pp.155-159
Bhrigu Joshi, Sailesh Adhikari and Suresh Bhalla
Optimal Tolerance
Allocation through Tolerance Chain Identification System
pp.160-168
M. Thilak, N. Senthil Kumar and G. Jayaprakash
Intelligent Technique Based
Modeling for Rotary Electrical Discharge Machining Process Parameters
for Inconel 718
pp.169-173
S. Dhanabalan, K.Sivakumar, and C. Sathiya Narayanan
Risk Management and
Assessment by Failure Mode and Effect Analysis of Vertical Balancing
Machines
pp.174-181
Vijay Singh Dalal, Vibhor Kakkar and Anmol Bhatia
Fuzzy graph theoretic
approach to compare the factors affecting the service quality of
distributors
pp.182-186
Tarun Kumar Gupta and SinghVikram
A Strategy For Reducing The
Waiting Time of Airline Passengers Using Queuing Theory
pp.187-193
Saad Parvez, Prateek Gaur, Abhishek Paliwal, Naimish Srivastava, Hemant
Singh, and Amitesh Kr. Chaudhary
THE BULLWHIP EFFECT
PHENOMENON IN INDIAN AUTOMOTIVE SUPPLY CHAINSMr.
pp.194-198
Vijay Singh Dalal, Vibhor Kakkar, Anmol Bhatia
Impact of Cloud Computing
for E- Enabled Supply Chain
pp.199-202
Ashutosh and D. K. Banwet
Exhaust Heat Recovery of
Bessemer Furnace ForTipple Effect cooling system: A case study
pp.203-207
Ashish Gautam,Vinod Sehrawat and TarunGupta
Dehumidification of Indoor
Air Using Integrated Solar Powered Evaporative Air Cooler
pp.208-212
Sumangal Chugh, Sourav Kant, Deepak Monga and Devendra Kumar Pathak
Computational Study on Flow
Structure and Combustion of Open Methane/air Swirling Flame
pp.213-219
Vikram Dang, Subhash Chander
Numerical Analysis of Steam
Generator Membrane Wall for Super Critical Boilers
pp.220-227
C.Sathiyanarayanan, A. Manivannan and P.Pandiyaraj
Performance review of solar
absorption cooling systems world wide
pp.228-231
Vinod Sehrawat, Tarun Kumar Gupta, Gulshan Sachdeva and Arvind Kumar
CFD Analysis of Counter
Flow Annular Microchannel Heat Exchanger with Slip Flow Heat Transfer
pp.232-238
Satyendra Singh, Lokesh Chandra Joshi and S R Kumar
Performance Comparison on
Vapour Compression Refrigeration System by Using Alternate Refrigerants
pp.239-243
Senthil kumar.S, Thilak.M, Raja jayasingh.T and Arun.S
Numerical Investigation of
Heat Transfer Characteristics of Different Rib Shapes in a Gas Turbine
Blade
pp.244-248
Naik Nithesh, Ashutosh, Mayank, Utkarsh and Andre Rozek
Comparative study of Micro
and Macro Shock Tube Flows Using CFD
pp.249-254
Susheelkumar Babu Patil and Nagaraja S. R
[UP]
| |
|