| |
International Journal of Applied Engineering Research (IJAER)
Volume 10, Number 71 (2015) Special Issues
CONTENTS
A Brief Literature Review on Green and Sustainable Manufacturing
pp.1-5
P.Senthil kumaar and P.Maniiarasan
CONTENT BASED IMAGE RETRIEVAL TOOL BASED ON AUTOMATIC ANNOTATION FOR MACHINE LEARNING OF ROBOTS
pp.6-18
Pathur Nisha S, and Ilango Krishnamurthi
Curing time optimization of Raw Edged Cogged Belt with Better Jacket Adhesion
pp.19-22
P.S.Samuel Ratna K umar and.S. John Alexis
Developing a Metric for Timely Availability of Earth Moving Equipments in Infrastructure Project
pp.23-34
S.Gobinath, D.Elangovan, A.Rajagopal and S.R.Devadasan
Effect Of Chemical Treatments on Mechanical Properties of Pilus Fiber Hybrid Composite Laminates
pp.35-40
B.SUTHARSON, R.SARALA, S.AROKYA AGUSTIN and P.JOTHIRAJ
EMISSION ANALYSIS OF FOUR STROKE SINGLE CYLINDER CI ENGINE FUELED WITH BME BIODIESEL AND ITS BLENDS
pp.41-46
R.saravanan, P.Naveetha Krishnan, R.Murali Manohar and J.Senthil
Enhancing Conveyor Performance and Reliability by Condition Monitoring
pp.47-54
R.Suryanarayanan
Experimental Investigation and Analysis of Optimum Properties of Copper Alumina Composites for High Temperature Applications
pp.55-58
M.PRASATH KUMAR, N.MANIKANDAPRABU and.M.ARUN PRANESH
Experimental Investigation of the Performance and Emission of Diesel Engine by Pre-Heating the Inlet Fuel
pp.59-63
Tamizhazhagan.D and Pravin Kumar.J
INVESTIGATION OF DYNAMIC AND THERMO MECHANICAL PROPERTIES OF HYBRID POLYMER MATRIX COMPOSITE
pp.64-69
L.Franklin Arokiya Raj, S.Jeevanantham and P.Bagyalakshmi
Numerical Modellingand Validation of Friction Stir Welding Parameters for 6061 Aluminium Alloy
pp.70-76
Pradeep Johnson and N. Murugan
Optimising lubrication to avoid energy loss due to friction in sliding members using response surface methodology
pp.77-83
A.R. Suresh and I Rajendran
Optimization of friction stir
welding parameters on metal matrix composites (AlSiC) by Taguchi method and Genetic Algorithm
pp.84-87
R.Karthikeyan, M.Saravanan, P. Maheandera Prabu and A. John Martin
Optimization of Process Parameters of High Speed Machining of Gun Metal Castings
pp.88-92
N Parameshwari and M. Ramesh
Optimizing the level Schedule in mixed model assembly line by simulated annealing
pp.93-101
R. Senthilkumar and A.S. Ramkumar
Response Surface Methodology Based Optimization of Diesel - Groundnut Oil Dual Fuel Engine with Diethyl Ether Additive to Improve CI Engine Performance
pp.102-109
N.Vadivela, P.Somasundaram and M.Krishnamoorthi
REVIEW ON RAPID PROTOTYPING AND ADVANCED MANUFACTURING TECHNOLOGY
pp.110-115
Boopathy G, Vadivel V and Krrishna Kumar M R
SEMI-AUTOMATIC TOOL CHANGER FOR SMALL AND MEDIUM SCALE INDUSTRIES
pp.116-120
M.Sejzu and R.Govindaraj
SUPPLY CHAIN AND LOGISTICS MANAGEMENT AT SMALL SCALE INDUSTRY WITH OPERATION RESEARCH TECHNIQUES
pp.121-125
N. Gopalsamy and. P. Maniiarasan
TENSILE TEST ON BAMBOO GLASS HYBRID COMPOSITES
pp126-129
T. Banu, V. Sankar and J. Karthikeyan
Tribological Behaviour Of Flyash Based Composites
pp.130-134
K.Vinoth Kumar, P.karthik, D.Saiprashanth and R.Pavendhan.
EMISSION MEASUREMENTS IN A LAB SCALE COMBUSTION TEST FACILITY
pp.135-142
C.Lindon Robert Lee, S.Antony Raja, A.P.Haran and P.Solomon Durairaj
PRIVACY ENHANCED SITEKEY AUTHENTICATION FOR MOBILE CLOUD USING VISUAL CRYPTOGRAPHY
pp.143-154
Arvind. K. S and R. ManiMegalai
PLASTIC INVESTIGATION FOR BOROSILICATE AIRFILTERS
pp.155-173
V.S kandavel and G.mohankuar
DESIGN OF METRO DWDM NETWORK AND ITS PERFORMANCE EVALUATION USING LINEAR TOPOLOGY
pp.174-185
K.Uthayasuriyan and K.Sheela Sobana Rani
RIPPLE: A SCALABLE, LOAD-BALANCED, AND FAULT-TOLERANT EVENT DISSEMINATION STRATEGY
pp.186-200
Anson Antony Fertal and P. Priya Ponnusamy
STUDY ON CLUSTER HEAD SELECTION BY USING FUZZY SET ALGORITHMS IN MOBILE AD HOC NETWORKS
pp.201-208
D.Jebakumar Immanuel and G. Mohan Kumar
IMPLEMENTATION OF CHIP LEVEL DATA MINING ALGORITHMS FOR FREQUENT ITEMSETS
pp.209-222
J. SAMSON IMMANUEL and A.P.HARAN
ASIC ANALYSIS OF QUASI CYCLE LOW DENSITY PARITY CHECK (QCLDPC) DECODER USING 45 NM TECHNOLOGY
pp.223-235
G.Manoj, A.P.Haran and P.S.Divya
AN EFFICIENT APPROACH FOR TEMPLATE DETECTION AND CONTENT EXTRACTION FROM WEB PAGES
pp.236-244
G.Naveensundar, A.P.Haran and D.Narmadha
ANALYSIS OF POWER IN DML USING GATING TECHNIQUES
pp.245-260
A.Biju Anusha and C.N.Kalaivani
ENHANCED SEARCH IN PARTICLE SWARM OPTIMIZATION FOR MULTI-OBJECTIVE OPTIMAL POWER FLOW
pp.261-267
K.Rajalashmi and S.U.Prabha
MINIMIZING THE PENALTY COST OF AIRCRAFT LANDING USING OPPOSITION PARTICLE SWARM OPTIMIZATION
pp.268-279
C.Nithyanandam and G.Mohankumar
AN EFFICIENT FALSE DATA FILTERING SCHEME BY USING P- MESSAGE AUTHENTICATION IN WIRELESS NETWORKED SYSTEM
pp.280-292
P.RAJESHWARI and S. ARAVINDH
DESIGN OF FINITE FIELD HYBRID MULTIPLIERS WITH OPTIMUM PLACEMENT AND ROUTING ARCHITECTURE
pp.293-306
Nagalakshmi Venugopal and R. Manimegalai
EXPERIMENTAL ANALYSIS OF HEAT TRANSFER IN CI ENGINES USING SQUISH PISTON
pp.307-316
T. Nithiyanandam and P.Senthilkumar
FLIP-FLOP WITH DUAL DYNAMIC NODE FOR LOW POWER USING EMBEDDED LOGIC
317-326
Nithya.T and Jeya Prakash.M
Microstructure and Surface
Characterization Analysis of FeBCr Based Alloy Coating Produced by HVOF
Method
pp.327-331
Shunmuga priyan M, Hariharan P, Azad A and Saran Kumar K.
Multi Parametric Optimization
of Friction Weld Characteristics of Al/SiCp Composites using Grey
Desirability Analysis (GDA)
pp.332-338
R.Adalarasan, M.Santhanakumar and A.Shanmuga Sundaram
Experimental and Numerical
Investigation of the Flexural properties of Thick Laminated Hybrid
Composites
pp.339-343
R.Selvam, N.Arunkumar and L.Karunamoorthy
COMMUNAL FRAUD DETECTION
ALGORITHM FOR IDENTITY THEFT IN ONLINE SHOPPING
pp.344-348
T.JOHN BERKMANS and A. CHRISTY
The Effect of the Die
Temperature on the Thermo-elastic Stress Analysis of the Al/SiCp Metal
Matrix Composite: A Comparative Study of Experimental and Finite Element
Analysis
pp.349-354
P.Gurusamy and S.Balasivanandha Prabu
RFID – ECG Integrated Approach
for Cloud Authentication
pp.355-359
G.Venifa Mini and J.Jeya A Celin
Dynamic characteristics of the
pure epoxy and two different fiber orientated (0° and 45°) Polymer
Composite Specimens
pp.360-364
P Nagasankar, S Balasivanandha Prabu and R Velmurugan
Influence of Squeeze Pressure
on the Squeeze Cast Al/SiCp Metal Matrix Composite
pp-365-370
P.Gurusamy and S.Balasivanandha Prabu
Structural Behaviour of Self
Compacting Concrete Beams made with Manufactured Sand
pp.371-382
S.Kalirajan, K.Vignesh and B.G.Vishnuram
Optimizing the PVD Process
Parameter for Coating ZrN on AZ91D Magnesium alloy by Taguchi Method
pp.383-385
M.Sivapragash, P.Kumaradhas and B. Stanly Jones Retnam
3D-Numerical Investigation of
Offset Jet Flow and Heat Transfer Analysis of Block Mounted On a Cavity
PP.386-391
P.MaheanderaPrabu, K.P.Padmanaban, P.Rajesh Kanna, K.Karthikeyan and P.
Sasikumar
A study on fatigue failure
analysis of an off-highway vehicle chassis rear rail structure using
finite element approach
pp.392-400
V S Thangarasu, N V Dhandapani and G Sureshkannan
RESOURCE ORIENTED PERVASIVE
COMPUTING VIA QoS-COOPERATIVE QUEUEING MODEL
pp.401-407
Beaulah David and P.Raviraj
INVESTIGATION OF ELLIPTICAL
DELAMINATION BUCKLING IN STITCHED AND UNSTITCHED COMPOSITE LAMINATE
pp.408-412
P.Prabhu, N.Velmurugan, D.Jayabalakrishnan and M.Tamilselvan
INVESTIGATIVE RESEARCH OF
COMPACT PCM FILLED THIN TUBE LATENT HEAT SOLAR WATER HEATER
pp.413-416
G.Suganya, B.R.Ramesh Babu, B.R.Vijay Prithiv and M.Kamal
Advances in Dental-PMMA based
artificial teeth through Rapid Prototyping technology
pp.417-419
Dinesh Kumar S, Senthil Kumar K and Ekanthamoorthy
TESTING ON GLASS FIBRE
REINFORCED HYBRID COMPOSITE MATERIAL
pp.420-424
K.Alagarraja, S.Prakash, J.Saravana Perumal, D.Satheesh and S.Selva
Kamaraj
Green synthesis and
characterization of herbal nanosilver using extract of Aloe vera.
pp.425-428
Thangaraja, A and Shravan , J.S
Analysis of Severe Plastic
Deformation of Composite Material through Equal Channel Angular Pressing
Machine (ECAP)
pp.429-435
Saravanan.K, senthil Kumar,M, Venkatachalam, P and Deepak .U
Microstructure Evaluation of
Composite Material through Equal Channel Angular Pressing Machine (ECAP)
pp.436-441
Saravanan.K, senthil Kumar,M, Venkatachalam, P and R.Mani Eswaran
Insilico approach to study the
molecular simulation of Collagen like peptide based Biomaterial.
pp.442-447
Lavanya Gunamalai and Chellam Jaynthy
AN OVER REVIEW OF THE EFFECT
OF PROCESS PARAMETERS, TOOL GEOMETRY AND JOINT GEOMETRY IN FRICTION STIR
WELDING AND FRICTION STIR PROCESSING
pp.448-455
D.Jayabalakrishnan, M.Balasubramanian, P.Prabhu and M.Tamilselvan
3D-MODELING,DESIGN AND
ANALYSIS OF MECHANISM OF TIRE FIXTURE USED IN TIRE BUILDING MACHINE
pp.456-463
P.Prabhu, M.Balasubramanian, D.Jayabalakrishnan, N.Velmurugan and
M.Tamilselvan
COMPARATIVE STUDY OF PART
QUALITY IMPROVEMENT IN FUSION DEPOSITION MODELING PROCESS
pp.464-468
Dinesh Kumar S, Mathan Kumara and Karthikeyan.Kb, Kumar
MECHANICAL PROPERTIES OF
B4C-SiC REINFORCEMENT ON ALUMINIUM 6061
pp.469-471
Dinesh Kumar S, Muthukrishnan, Srirama, Divakarb and Raghevendran
Static and Fatigue Simulation
of Automotive Anti Roll Bar before DBTT
pp.472-476
Amol Bhanage and K. Padmanabhan
Static and Fatigue Simulation
of Telescopic Fork Suspension System Used For Motorcycle
pp.477-480
Amol Bhanage, K. Padmanabhan and Rupesh Sundge
Dynamic Analysis of Sandwich
Composites
pp.485-488
Ram P. Chennuri, Ravi T. Deekonda and Venkataramana K. Reddy
Optimization of Single Roller
Burnishing Operation For Surface Roughness and Surface Hardness Using
Artificial Neural Network
pp.489-493
Nikhil M. Shinde and V. K. Kurkute
Experimental Investigation and
Multi Objective Optimization of WEDM of Duplex Steel using Grey Coupled
Fuzzy
pp.498-502
Bala G Narasimha, Vamsi M Krishna and Rajesh Nagadolla
A Review on Metal Matrix
Composites and It’s Machining
pp.503-508
Shrinivas S. Jadhav, J. B. Sankpal, N.G. Patil and Abhijeet S. Kabule
Evaluating effect of 4th Pass
of SMAW and TIG welding on corrosion rate, microstructure and HAZ of Low
Carbon Steel
pp.513-517
Sachin P. Ambade, Chetan S. Sable, Awanikumar P. Patil and Y. M.Puri
Performance Evaluation of
Downdraft Gasifier on Multi Fuels
pp.522-526
Manish H. Gadara, Vimal R Patel, Darshit S. Upadhyay and Rajesh N. Patel
Effect Of Operating Factor On
Removal Efficiency Of Electrocoagulation Process For Distillery
Wastewater Treatment
pp.527-530
Kaustubh Sanjay Sasane
Comparative Dynamic Mechanical
Analysis Study of Rubber and Magnetorheological Elastomer
pp.531-534
Sanjay R. Kumbhar, Subhasis Maji and Bimlesh Kumar
Dye Sensitized Solar Cell:
Novel Dyes from Natural organic sources, Extraction and study
pp.535-539
Vipinraj Sugathan, Elsa John and K. Sudhakar
Study of power performance
characteristics of CNG engine using HCNG blends through experimentation
and simulation (using a 1D simulation tool)
pp.554-565
K P Kavathekar, S S Thipse, S D Rairikar and N V Marathe
Characterization of the
Ultrafine and Nano Particle Emissions on Modified Indian Driving Cycle
for Passenger Cars Operating on Gasoline – Operating Phase wise Analysis
pp.566-573
H.A. Nakhawa and S. S. Thipse
Experience development
oil-bearing neurochip for prediction of deposits
pp.591-595
Sergey Gorbachev
Performance Improvement of
Refrigeration System with Environmental Friendly Refrigerants
pp.596-600
V. W. Bhatkar, V. M. Kriplani and G. K. Awari
[UP]
| |
|