International Journal of Applied Engineering Research (IJAER)

 

 

 

Volume 10, Number 68 (2015)   Special Issues

 

CONTENTS

 

 
Design modification and CAE Analysis of 5Y Spokes Motorcycle Aluminium Alloy wheel
pp.1-5
K. CHENTHIL KUMAR and G. THANIGAIYARASU

Weight Reduction of Knuckle of Passenger Car Suspension System using CAE Optimization
pp.6-13
Anilkumar S Nesarikar and V Manoj Kumar

Numerical modelling of curvilinear composite fibers using Non Uniform Rational B-Spline curves
pp.14-21
Manu Jayakumar and K. Ramajeyathilagam

Numerical modelling of valveless based pulse detonation engine
pp.22-28
Neeraj jerauld, Dinesh kumar.G and D.Gowri Shankar

CFD ANALYSIS OF A CIRCULAR TUBE FITTED WITH RTSG
pp.29-33
A. Pavan and Sivakumar.R

CFD analysis of fluid flow and heat transfer in a solar water heater with corrugated pipe
pp.34-39
Sayooj.K.R and Saleel Ismail.

CFD Analysis of Heat Enhancement Methods for a Solar Air Collector 
pp.40-43
Aby Alias and Saleel ismail

Design, Analysis and Optimization of Aerodynamic Parameters of Wind Turbine Blade
pp.44-50
E. VIJAYARAGAVAN, and V. VIJAY

Optimizing Process Parameters of CNC Turning Process Using Taguchi’s Design of Experiments
pp.51-56
Arsath Rahuman.M, Rajmohan.M, Suresh Kumar.S and Mariyappan.K

Speech Recognition For Humanoid Robot
pp.57-60
A. Joshuva and V. Sugumaran

Finite Element Modelling and optimisation of Prosthetic Knee Joint with polyethylene chopped carbon fibre
pp.61-66
J.Silkson john and H.Mohammed ali

Redesign and Optimization of Intake System and Filter of an Automobile Using CFD Analysis
pp.67-70
T.Raghuraman and K.Pandiganesh

Study on The Behavioural Aspects of M-60 Grade Highstrength Concrete
pp.71-74
V.S.Sethuraman and K.Suguna

Experimental Study on Behavioural Facets of High Strength Concrete With Silica Fume
pp.75-78
A.P.Aroumugame, A.Ravichandran and P.N.Ragunath

Study Onbehavioural Facets of High Strength Steel Fibre Reinforced Concrete
pp.79-83
A.Vallavan, A.Ravichandran and P.N.Ragunath

Study Onbehavioural Facets of Normal Strength Steel Fiber Reinforced Concrete
pp.84-88
L.K.Rex and P.N.Ragunath

Effective Utilization of Industrial Waste in Sustainable Self Compacting Concrete
pp.89-92
V.Manjula and T. Felixkala

Comparative Studies Between Moving Bed Biofilm Reactor and Membrane Bioreactor on the Treatment of Dairy Wastewater
pp.93-97
Jaya S, Arvind D and Ravi Sankar V

EXPERIMENTAL STUDY ON LOW COST CONCRETE USING INDUSTRIAL WASTE AS SUPPLEMENTARY CEMENTITIOUS MATERIALS
pp.97-101
J. M. Venkatesan

Strength of High Performance Concrete By Partial Replacement of Natural Sand Using M-Sand
pp.102-104
P.Jeyakumar

Eco – Friendly Environmental Materials in Concrete
pp.105-108
S. MuraliKrishnan and T.Felix Kala,

Experimental Investigation on the Strength and Durability Properties of Concrete Using Manufactured Sand
pp.109-114
B. Vijaya and S.Senthil Selvanb

EXPERIMENTAL STUDY ON DIFFERENT MINERAL ADMIXTURES AS REPLACEMENT OF CEMENT IN CONCRETE
pp.115-118
M. MANIKANDAN

Testing on the Replacement of the Granite Waste for Sand and the Addition of Admixtures for Self- Compacting Concrete
pp.119-122
M. MANIKANDAN and T. FELIXKALA

EXPERIEMENTAL INVESTIGATION ON SOLID WASTE CONCRETE USING GRANITE POWDER
pp.123-129
A.Arivumangai and T. Felixkala

ASSESSING CHANGES IN URBAN MORPHOLOGY IN LAST THREE DECADES USING REMOTE SENSING AND GIS
pp.130-132
Sivaraman.T.

ELECTRONIC WASTE MANAGEMENT: A REVIEW
pp.133-138
P.Gomathi Nagajothi and T.Felixkala

Product Aspect Ranking Using Sentimental Classification Algorithm
pp.139-144
Sridevi.S, Deva hema.D and Indumathi.N

Data Transmission In Networks Using Dynamic Path Re-Planning Method With Improved Efficiency In Time And Energy
pp.145-148
Lalitha Rani.S and Mohanavalli Krithika

Arranging a Communal of MapReduce Jobs for Minimizing Their Makespan
pp.149-153
Jasmine S and Pandiaraj S

Performance Improvement of Faulty NodesUsing Efficient Energy Consumptionin MANET
pp.154-159
S.IsmailKalilulah, B.Justus Rabi, and Principal,

Big Data Analytics Architecture for Secured Wireless Body Area Sensor Networks
pp.160-166
R.S.Ponmagal, K.Sujatha, T.Godhavari and S.Jegadeeswari
.
Eye State Prediction using EEG Signal and C4.5 Decision tree algorithm3
pp.167-171
Rajesh Kanna. K, Sabarinathan. V, Sarath Kumar. V. J and Sugumaran. V

Future Enhancement Technique of Real Time Big Data Analysis, Its Applications and Challenges
pp.172-175
M.ARUN, R.MAHASHREE, T.THULASI, S.KEERTHANA and S.NANDHINI

A Review- Data mining, Web mining with fuzzy logic approach to web search personalization
pp.176-180
V.Raju and N.Srinivasan

Human Tracking System
pp.181-184
Arjun.A and V. Sugumaran

Gesture Recognition System For Dynamic User Interface
pp.185-190
Vipin. V and.V.Sugumaran

Classification of Advertisement and Non-Advertisement Videos with BICC features using CSCA Algorithm
pp.191-196
B.Rebecca Jeya Vadhanam and V.Sugumaran

Retrival of Peculiar Images using Color Features Methodologies
pp.197-199
Ramyaa R and Ishwarya Priya P A

Design of Vibration Isolator for Reaction Wheel induced disturbances
pp.200-203
M.Balachandran, G.Jagadeesh, S.Sundaramoorthy and J.Thayumanav

Design and Analysis of High Speed Water Pump for Domestic Purpose
pp.204-206
Balasubramanian.T, Venkateshwarn.P, Suresh.P and Vaithiyanthan.P

Effect of Residual Stresses on Shot Flow of Shot Peened Blading Steel for LP Turbine
pp.207-210
S. SRILAKSHMI and P. MUNI RAJ CHANDRA

Design of Gyroscope Based Gripper for Balancing Weights
pp.211-213
V. Arvind and Priyanka chemudugunta

Development of a Wall Climbing Robot
pp.214-218
Rakesh Vanam and C.Balasuthgar

A Bi-ped Water Running Robot Incorporating the Four-bar Linkage Mechanism
pp.219-222
Hemanth Reddy Avutu and S.V.N.B Prasad,

Design of Special attachment for nonstop local EMU in Indian Railway
pp.223-228
Senthil Kumar C U and Kirupa Shankar K

Design and analysis of vane type of muffler
pp.229-233
G.Anbarasu and M.R.Swaminathan

Fault Diagnosis of Gear using Histogram Features of Vibration Signals and Classifier Ensemble
pp.234-238
A. Ramu, V. Sugumaran and M. Amarnath

Synthesis of Lift axle control system in Non- Reactive Suspension
pp.239-243
S. Aravinth, K. Annamalai and A. Sahaya Grinspan

A Design and Fabrication of Improved Dishwasher
pp.244-246
N. Manikandan, .Mungee Shubham Sanjay and.Hoshang Panchal

VARIATION IN THE INTERNAL DAMPING AND FIBER ANGLE ORIENTATION ON THE C-CROSS SECTIONED BEAM SUBJECTED TO TANGENTIAL FORCES
pp.247-252
R. HarikaA, M. Vidya Sagar and Reeti Mukherjee

An Alternate Method of Controlling the Rear Wheel Lift during Braking in Light Commercial Vehicle (< = 1 T)
pp.253-257
N. Viswanathan

Design and development of refrigerated fruit ripening chamber
pp.258-262
Ajit Suresh Saruk

Effect of Stacking Sequence on Bending Stiffness with Respect to 60? Angle Ply
pp.263-265
Reeti MukherjeeA, P. Prasanna, R. Harika and K. Dhruva Rathod

Design and Analysis of Automated Bicycle
pp.266-272
V.Arvind and Ch.Priyanka

Fault Diagnosis of Spur Gear System Using Fuzzy Logic Through Image Processing
pp.274-278
PASUPULETI SAI SAMANTH and SHALET K S

Conceptual Design of a Swept-Strut Injector for the Scramjet Combustor
pp.279-286
D.Gowri Shankar, G.Dinesh kumar and Marshall Daison

Optimization of Scramjet Combustor with Normal and Tangential Fuel Injection
pp.287-293
G.Dinesh kumar, D.Gowri Shankar and Jean Varghese Divan

Prototype of Mobile Pick and Place Robot
pp.294-298
Kumanan K and Co-Author :KeerthiP

Path Planning Robo Using Astar Algorithm
pp.299-302
Jeyanthi A and G.Kanalarasu

Design and Optimization of Worm Gear Using GA
pp.303-307
S.K. Rajesh Kanna and C. Murugan

Design and Fabrication of an Outdoor Quadcopter
pp.308-312
S. M. Mohamed Javid and R. Ambigai, M.E.

Design and Development of Robot Cell for Material Handling system
pp.313-317
M. Avinash and A. Arockia Selvakumar

Fabrication and Actuation of Humanoid Robot Hand
pp.318-321
A. Ramu and V. Sugumaran

A Comparative Study of Tree Family Classifiers for Fault Diagnosis of an Automobile Hydraulic Brake System using Statistical Features
pp.322-327
R. Jegadeeshwaran and V. Sugumaran

Face Recognition and Obstacle Avoidance System using MATLAB for Humanoid Robot
pp.328-333
Thameem Ansari and Priyanka Chemudugunta

Simulation and Analysis of Magneto-Rheological Dampers for Heavy Vehicle Applications
pp.334-338
S.Anburose, P.S.Mani, J.Udaya Prakash and M.Sakthivel

Design and Fabrication of Compliant Mechanism based Microgripper with Integrated XY Positioning Stage
pp.339-342
Thirumurugan.D and Manikandan.G

CONTACT STRESS ANALYSIS OF A SPUR GEAR TOOTH PAIR FOR TWO DIFFERENT MATERIALS
pp.343-349
K SIVAKUMAR, T.M.SARAVANA MANIKANDAN, S.BALAGURU, R.SABARISH and R.HARIHARAN5

Pwm Signals Generation with Inconsistent Duty Cycle using FPGA Spartan-3E
pp.350-354
K.HEMACHANDRAN, B.JUSTUS RABI and S.MANIVANNAN

Microcontroller based electronic modules for low velocity airburst Counter Defilade munitions
pp.355-360
Rakesh Nair, G. Sakthivel and Hemanth Mithun Praveen

Real - Time Health Monitoring System for Military Soldiers using Zigbee with Wearable Sensors
pp.361-364
Nimitha N, Santhosh Kumar V, Steffin Franklin and Vignesh M

Improvement of the Reliability of Multipliers using Adaptive Hold Logic
pp.365-371
Aarthi K.J Veronica, Preeti M, Sivasankari J and Swathi K

A Novel Enhancement of Wavelet Decomposition Control with Space Vector Pulse Width Modulation on PMSM using MATLAB
pp.372-376
Sriharsha Potnuru P and K. Senthil Kumar

Comparison of EEG and EMG signals for prosthetic control of ARMA features using Decision Tree Classifier
pp.377-382
V.V.Ramalingam and S. Mohan

Collision Avoidance and Boundary Plotting using Non Contact Sensors for Mobile Robot Applications
pp.383-387
Pooja Mahapatra, R. Jegadeeshwaran, K. Janardhan Reddy and Hemanth Mithun Praveen

Bist and Pseudo-Exhaustive Pattern Generation for Hardware Based Testing of VLSI Circuit
pp.388-393
K.VIJAYAKANTHAN, M.ANAND AND S.RAVI

Performance analysis of Grid connected Distributed Power Generation System
pp.394-401
A.Kannan, P. Neerkathalingamr, K.Sujatha, and B.Justus Rabi

Enhanching Distribution Power Quality using smart grid
pp.402-407
A.Kannan, P.Sundar, K.Sujatha and B.Justus Rabi

Power Quality Enhancement Using Fuel Cell Based Dynamic Voltage Restorer
pp.408-411
A. Kannan, P. Haridhass, S.S. Darly and B. Justus Rabi

Optimum Design and Development of High Voltage Junction Box for Hazardous Area
pp.412-415
K. MOHANRAJ and K. CHANDRA MOHAN

A Comprehensive Review on Coordinated Control of Distributed Energy Resources and Energy Storage Systems
pp.416-420
E. Sheeba Percis, 2S. Manivannan, and A. Nalini.

Optimization of Operation Cost of Distillation Column Using Genetic Algorithm
pp.421-427
S.Srividya, G. Balasubramanian and K.Ram kumar

Shielding Effectiveness of Enclosures – A Review
pp.428-430
S. Bhuvaneswari,.S.Manivannan and G.PandiSabareeswari

Water use and Conservation Technique in Tourism Hotels of South India
pp.431-437
S.Kumaran, R. Kannan and T.Milton

A Design of Single Axis Solar Tracking Using Embedded System
pp.438-442
K.M.Giriprasad and N.Manikandan

Sustainable Waste Water Management for the Extension area in South Zone of Madurai Corporation
pp.443-446
M.Surya and R.K.C.Jeykumar

EXPERIMENTAL INVESTIGATION OF THE EFFECT OF DUAL MODE HYBRID TRACKING SYSTEM AND SOILING ON THE PERFORMANCE CHARACTERISTICS OF SOLAR PANEL
pp.447-456
SRUJAN RAO, M.VINOD KUMAR, S.PRAVEEN GOWTHAM and VIVEK YERUBANDI

Optimization of tribological properties of hybrid Aluminium matrix composites using Grey relational analysis
pp.457-461
J.UDAYA PRAKASH, S.PERUMAL, K.V.ARUN PILLAI, S.SURIYA PRATHABAN and T.V.MOORTHY

Evaluation of wear and Hardness of LM25 Alloy reinforced with Nano Al2O3 and Micro TiB2
pp.462-466
Surendran.R, Shanmugaselvam.P and Kumaravel.A

Design and Control of aCartesian Robot for Machining Application
pp.467-471
BhagyashreeDas and .M.RStalinJohn

Parametric Optimization of Wire-Edm on AISI H13 tool Steel
pp.472-475
J.UDAYA PRAKASH, R.RAMKUMAR, T.V.MOORTHY and S.ANBUROSE

Fault Diagnosis of Bearing using Sound Signals through Histogram Features and Decision Tree
pp.476-481
K. BALACHANDAR, V. SUGUMARAN, R. JEGADEESHWARAN and M.AMARNATH

Selecting Kernel Function of Support Vector Machine for Fault Diagnosis of Roller Bearings using Sound Signals through Histogram Features
pp.482-487
A. JOSHUVA, V. SUGUMARAN and M. AMARNATH

Investigation of Process Parameters on High Speed Milling Machine for Dry Cutting using Carbide tools
pp.488-493
JESTIN JOSE J and SANTHAKUMAR,

Fault Diagnosis of Bearing Using Sound Signals through Histogram Features and Baye’s Algorithm
pp.494-498
S. Aravinth V, Sugumaran, R. Jegadeeshwaran and M.Amarnath

Implementing Machine Learning Technique to Monitor Automobile Tyre Pressure
pp.499-505
Hemanth Mithun Praveen and V. Sugumaran

Design and Fabrication of Automatic Swinging Baby Cradle
pp.506-508
R.M. Madhan and K.C.UdaiyaKumar

Design and Fabrication of Wind Mill Using Multi- Gears for High Power Production
pp.509-512
C.senthilkumar, K.C.UdaiyaKumar and V.Vani

An Experimental study on Energy Absorptioncharacteristics of Double Hat Section Tube with different geometric parameters such as Holes and Trigger dents
pp.513-517
K.CHANDRA MOHAN and.TIRUVAYIPATI NEELU

Friction stirwelding: process parameters, defects &experimental modeling
pp.518-522
SevvelP and Jaiganesh V

Optimization of Boring Parameters on AISI 410 by design of Experiment Concept 
pp.523-525
TTM.Kannan, K.Bhuvanesh, S.Giridharan and P.Vijaya Kumar

Optimization of Machining Parameters in Drilling of Aluminium Matrix Composites using Taguchi Technique
pp.526-529
J. UDAYA PRAKASH, T.V.MOORTHY and S.PERUMAL

Friction welding of similar 4140 steels
pp.530-533
Cyril Mathew Samuel B, Ramesh, D.Ananthapadmanaban and Arvind Ananthan

Experimental Determination of Thrust Force, Torque and Surface Roughness in Machining Austempered Ductile Iron (ADI)
pp.534-541
Kumar.K.M, Venkateshwaran.P and ,Suresh.P

Optimizing the Rolling Parameters for Reducing the Thickness of a Steel Slab in Steckel Mill
pp.542-546
GOUTHAM.P, P.MURUGESAN and R. JEGADEESHWARAN

Grey-relational Analysis of WEDM Parameters on O2 Steel
pp.547-550
V.Muthuraman, S.Sureshkumar and KarthikeyanRadhakrishnan

ANN Modeling of WEDM Parameters on machining O2 Steel
pp.551-554
V.Muthuraman,. S.Sureshkumar and Paul TheophilusRajkumar

Design and fabrication of three mode operation for four wheel automobile steering
pp.555-562
S.D.KUMAR and R.Ravichandran,

Design, Analysis, Fabrication and evaluation of polymer based microgrippers
pp.563-567
V. Vidyaa, S. Hosimin Thilagar, M. Kanthababu, R. Balasubramanian and V.K. Suri

Design, Analysis, Fabrication and Testing of hydraulically operated external expansion collet for gear grinding machine
pp.568-571
S. Manikandan, S. Karthikeyan and. K. Subramaniam

Design and fabrication of Automatic Pneumatic Bumper and Brake Actuation Before Collision
pp.572-577
S.D. KUMAR and S.Gopinath

Optimization of GMAW parameters to improve the tensile strength of welding material 
pp.578-581
Saravanan. S and Pitchipoo. P

Parametric analysis & Optimization of Machining Parameters of EDM Process on Cu-Zn Composite
pp.582-587
S.Marichamy,M.Saravanan and R.Praveen Kumar

A Review on Bearing Prognosis
pp.588-593
R.Satishkumar and V.Sugumaran

Characterization of Friction Stir Processed AA6063/Nano SiC Surface Composites with Different Tool Profiles
pp.594-597
Mohan.R, Alagirisamy.N, Suresh Kumar.S and Prahadeeswaran.M

Diagnosis of Heart Disease Using Decision Tree and SVM Classifier 
pp.598-602
Shalet K.S, V. Sabarinathan, V. Sugumaran and V. J. Sarath Kumar

Experimental Analysis of Agricultural Solar Dryer
pp.603-606
Shibin J Neithode and Baskar P

EXPERIMENTAL INVESTIGATIONS ON MATERIAL REMOVAL RATE, POWER CONSUMPTION AND SURFACE ROUGHNESS OF EN 24 STEELS IN CNC TURNING USING TAGUCHI METHOD
pp.607-610
F.B.V.Xavier

Modeling of the Friction drilling process for making holes in Aluminum Silicon Carbide Metal Matrix Composite
pp.611-614
G.Somasundaram, Mani Ravindran and Rasaiya

Machine Vision System – As a Dimensional Measuring Tool 
pp.615-619
P.S. Mani, S. Anburose and S. Karthikeyan

Synthesis of ZnO/Al: ZnO nanopowders:Structural and Optical Properties of ZnO nanoparticles by Al doping
pp.620-624
Aravapalli.Vanaja, Karumuri.Srinivasa Rao and Talam.Satyanarayana

Tribological Characterisation of Superalloys At High Temperature
pp.625-628
Subashchandrabose

Performance Evaluation of EDM Process of High Carbon Steel
pp.629-633
Uttam Kumar Mohanty and Jaydev Rana

Activated Carbon Of Black Gram Husk as An Adsorbent For The Removal of Dye Fuchsine Basic From Aqueous Solutions: Equilibrium, Kinetics and Thermodynamic Studies
pp.634-644
S.Valliammai, Y.Subbareddy, K. S.Nagaraja and B.Jeyaraj

Comparison of Epoxy Composites Using E-Glass/Carbon Reinforcements 
pp.645-650
Aninditha Mistry, Anu Anna Abraham, Dilikeshwar Das, A. Mathivanan, C. Sharada Prabhakar

Surface characterisation and electrochemical behaviour of alumina-titanium dioxide coated 316L stainless steel for biomedical applications 
pp.651-656
Goutham Murari V P and Azad A

Studies on Nucleation, Growth and Characterization of Nonlinear optical crystal-L-valine formamide zinc sulphate
pp.657-659
S. Radhakrishnan, D. Jayaraman and Kalaivani

Optimization of Tribological Properties of Gray Cast Iron using Gray Relational Analysis
pp.660-662
S.Ananth, T.V.Moorthy and P.Hariharan

Experimenal studies on Water absorption and Thermal degradation of Natural Composites 
pp.663-668
R. Vinayagamoorthy, S.Sivanarasimha,Vijay Padmanabhan, Vedula Ganesh and S.Karthikeyan

Hardness and wear Behaviour of Lead Metal Matrix Composites [PB / SIC] 
pp.667-672
S.Arokiasamy and B.Anand Ronald

Comparative Mechanical Property Analysis of Nylon6,6/ Cloisite®20A & Nylon6,6/Multiwall Nanotube Nanocomposites with Nylon6,6
pp.673-676
P.K.Chidambaram and S.John Daniel

Static analysis of hybrid thermoplastic composite using high density polyethylene, ABS and glass fibre
pp.677-681
Abhishek Nair R, Udaiyakumar K C and Nagarajan T T

Synthesis and Study of Hybrid Nano Fluid
pp.682-685
V.MithunChandar, Muneer Ahmed.J, Kushal Raman, Leo Vimal.P and K.M.B.Karthikeyan

Comparison of ASTM Plastic and Composite standards on mechanical properties of GFRP composites
pp.686-688
B.Vincent and B.Ramesh

Molecular Interaction Studies and Particle Size Determination of Oral Rehydration Salts ORS
pp.689-691
Preetha Mary George, P.Divya, N.S.Shubashree, M G R Educational

Acoustical and Thermodynamic Studies of Aqueous Sodium Potassium Tartrate at 303k3
pp.692-693
P.Divya, S. Jayakumar, Preethamary George and N.S.Shubashree

Studies on the Optical and Mechanical properties ofSchiff Base derivative NLO Single Crystal: BLZC
pp.694-695
E.Kavitha, S.Selvakumar, A.Chitra, J. Madhavan

Corrosion Behaviour of Surface Sensitized Carbon Fiber ROD Reinforced Al-6061 Composites
pp.696-699
Adarsha Hiriyanniah, Ramesh Chinnakurli Suryanarayana, Prajwal Rangappa Gnanamurthy and Ramkumar Penachaiah

NONLINEAR DYNAMIC INSTABILITY ANALYSIS OF ADVANCED COMPOSITE SHELL
pp.700-707
Saravanakumar J and T V Nagarajan

Wear behaviour of AA6061 aluminium alloy and its composites
pp.708-713
M.Viswanathan, Charles Philip and S.Sivabalaji

Synthesis and Optical Characterization of CPC capped Znq2 nano particles for Organic Light Emitting Diode Application
pp.714-716
V.Bharathi Devi, P. Arulmozhichelvan and P. Murugakoothan

Mechanical Properties of Hybrid Natural Fiber (Palm,Coir, Neem & Jute) Reinforced Composites for Spur Gear
pp.717-721
E.Sivasabapathy, K. Mohan Kumar and. L. Antony Michael Raj

Optimization of Plasam electolytic Oxidation Process Parameters for improving tha Corrosion resistance of AZ31 magnesium alloy using Taguchi method and Genetic Algorithms 
pp.722-727
K S Lakshmi kanth and N. Rameshbabu

Study on the Impact strength properties due to addition of Cloisite 30B in Glass Fiber Reinforced Epoxy-Aluminium laminates
pp.728-731
P.Mathivanan

Structural, Vibrational, Optical and Dielectric Studies on Bis-Glycine Lithium Molybdate
pp.732-734
A.Chitra, M.Dinesh Raja and E.Kavitha and J.Madhavan

Fabrication and Performance of Natural Fibers: Bird Nest Fiber, Chicken Feather Fiber, Coconut Spathe, Jute and Banana Fiber Reinforced with Polyester Composites for Automobile Dash Board Applications
pp.735-739
D.K.Mohan Kumar, B.M.Swami punniakodi, and.L.Antony Michael Raj

Design, analysis, fabrication and testing the mechanical properties of piston using Aluminum metal matrix composite
pp.740-743
S.S.Lokesh, A.Radha and M.Chandran

Thermo-mechanical properties of abaca fiber/pp/abscomposite
pp.744-749
Jaganadham Kumar and A.Bhaskar and T TNagarajan 

Third order Nonlinear Optical Properties of 4- Chloroaniline (CA) and 4-Chloroaniline Hydrochloride (CAHCL) Crystals for Optoelectronic Applications
pp.750-752
C. Andal and P. Murugakoothan

Evaluation of Mechanical Properties of AA6360 Aluminum Alloy – B4C – Al2O3 Metal Matrix Composites (MMCs)
pp.753-756
V.Mohanavel, E.ArunKumar, M.Lokesh kumar and P.Kumar

Study on Wear Behaviour of Al/SiC/MoS2 Hybrid Nano Composites Produced by Powder Metallurgy
pp.757-763
S.SARAVANAN and F.FREDRICK GNANARAJ

Acoustical Parameters and Stability Constant Determination For chlorophenols – CCl4 System
pp.764-765
Shubhashree.N.S, S.Jayakumar, Preetha MaryGeorge, Divya.P and M.Anees Ahmed

Terminal Ballistic Analysis using 7.62x51 mm NATO Round for Detachable Louvre Design Ballistic Resistance Louvre Design
pp.766-768
S. Karthikeyan, V. Vijayaraghunathan, S.A. Wilfred Rajkumar

Study on Mechanical Properties of Hair based Natural Fibre Composite 
pp.769-792
J. Jayaseelan, P. Palanisamy and K.R. Vijayakumar,

Fabrication of a multipurpose table using a composite of epoxy reinforced with natural fiber Bird Nest Fiber and Coconut Spathe
pp.793-797
D. K. Mohan Kumar, G. Dinakaran and L. Antony Michael Raj

Parametric and Material Optimization of Two Wheeler Pistonusing A2618, A390 & A384 Alloy
pp.798-801
JesudasanAbisak.S and Siva Sabapathy.E

Processing and characterization of Al-Ti-TiO2 composites by powder metallurgy route
pp.802-806
Lava Kumar Pillari, Nadimpalli Raghukiran and V. Umasankar

Nanofluid Nuclear Coolants
pp.807-814
R.Rajendran, Prof. R. Thundil Karuppa Raj and Rameshkumar. V.K

Evaluation of Interlaminar strength and Mechanical properties of FML fabricated using Epoxy, Anabond SM9000 and Polyester resins with coupling agents
pp.815-817
Thennarasan. S and Vasumathi. M,

Physicochemical and Bacteriological Analysis of an important Fresh Water Body in Kerala
pp.818-821
C.Sreekuttan Unnithan, Preetha Mary George, Shubhashree.N.S and Harikuttan Unnithan.C.

MECHANICAL CHARACTERISTICS OF GAS METAL ARC WELDING OF ASTM A 516 GRADE 70 STEEL
pp.822-828
K SIVAKUMAR, T.M.SARAVANA MANIKANDAN, S.BALAGURU, R.SABARISH and J.MANIKANDAN

ROLE OF THIRD PARTY LOGISTICS PROVIDERS TO INCREASE CUSTOMER SATISFACTION IN SUPPLY CHAIN 
pp.830-832
J.Sridevi 2K.Senthil Kumar

Reliability of dumper with Limited Failure Data Case Study of 240 Te dumpers
pp.833-838
Sanjay Prasad Dubey, Manish D. Uttarwar and M.S.Tiwari

Adverse effect of cost saving approach and Effective utilization of Manpower in Automotive industries.
pp.839-842
R.Lakshmanaperumal and B.Ram Kumar

Reliability Analysis of Passenger Transport Vehicles in Public Sector Undertaking
pp.843-850
S.Nallusamya, K.Balakannanb, P.S. Chakrabortyc, and Gautam Majumdar

REVIEW ON WORD LENGTH OPTIMIZATION
pp.851-853
Pandi G Sabareeswari, Bhuvaneswari S and Manivannan S

Simulation of Mixed Model Assembly Line Sequencing Using PRO-Model Software 
pp.854-856
J . Jayaprakash, K.Manoj Kumar Reddy and P.Ambedkar

Ant Colony Approach for Balancing Mixed Model Assembly Line with Parallel Workstations
pp.857-861
J . Jayaprakash, Muthamizhmaran.S and Mohammed Firos Khan.A

MINIMIZATION OF ELECTRICAL CIRCUITS USING GRAPH THEORETIC ALGORITHMS
pp.862-864
R.Nagarathinam, and. N.Parvathi,

A Study of Importance of Technology in Banking Operations
pp.865-868
K.Vimala, A.Devendran and S.V. Elumalayian

IMPACT OF BLENDED LEARNING TECHNIQUES IN ACADEMIC AND ITS MODELS
pp.869-872
M.Radhikaashree

The Logistics Sector in India: Oveview and Challenges
pp.873-875
K.Senthil Kumar J.Sridevi

A Study on Supply Chain Optimization - Alternative Strategies
pp.876-880
P.Raghunatha reddy and R.Jayam

Flow Distribution Comparison Between Circular And Triangular Header Of Compact Heat Exchanger
pp.881-884
KALIDASAN B and EDISON G

Experimental study of heat transfer enhancement in an in-pond heat exchanger using twisted tapes
pp.885-890
Pramod R Hande and K. Karunamurthy

A CFD Investigation of Modified Valve Effects on Air Flow of a Four-Stroke CI Engine
pp.891-897
S. Muhammed Rahamathullah, S.Muhammed Anas and P. Karthikeyan

Performance Analysis and Efficiency Enhancement of Parabolic Trough Collector with Twisted Tape Using CFD 
pp.898-902
Balaji R and M Natarajan

AN ANALYSIS OF FBC BOILER PERFORMANCE ON DIFFERENT TYPES OF COAL
pp.903-907
E.DEVANDIRAN, V.S.SHAISUNDARAM and S.RAM ABISHEK

Exergy Analyses of LiBr-Water Double Solar Vapor Absorption Refrigeration System Coupled Using Condenser
pp.908-911
P.Rajkumar, R.Shankar and T.Srinivas

Purification and Extraction of Fatty Acid Methyl Esters (Bio-Diesel) From Waste Vegetable Oil
pp.912-915
Matli Prabhu Kumar Reddy, Thulasi Ram Bharat.B, Babin Meshach.G and Murugavelh.S

Stack based thermoacoustic refrigerator
pp.916-919
Sajiv Jose

Emission control techniques using diethyl ether and alumina nano particles as additives with biodiesel ( Jatropha curcus ) in CI engine
pp.920-925
G.Logesh, E.Jeyabalan, N.Vimal raj and Abdul ahad ali khan

Impact of Water/Petrol Emulsion on Engine Performance 
pp.926-931
Tapanta Bhanja, Akash and A. Mathivanan

Analysis of Low Temperature Flashing Stage Desalination System
pp.932-935
V.K.Ramesh Kumar, Rajkumar P.R, Rajendran .R and G.Edison

Heat Transfer Study on Car Radiator by Applying Copper-Ethylene glycol and water mixture
pp.936-941
J.Sunil, R.Maheswaran and R.A.Arul Raja

THERMO-FLUID STRUCTURAL INTERACTION OF CRYOGENIC EXPANSION TURBINE
pp.942-946
Gine.S and Mahalingam.S

Cylinder Pressure Based Indices for Knock Detection in an Automotive Spark Ignition Engine 
pp.947-950
Saleel Ismail and Ramesh A.

Design and Fabrication of Direction Converter Unit for Wind Mill and Oscillated Water Column Turbine
pp.951-956
V.C.Mahaadevan, P. Vetrivezhan and S.Dhanalakshmi

Development of Model Based Steady State Calibration of 4 Stroke Port Injection System
pp.957-962
Akshay Pralhadrao Dhole and Sreekanth Dondapati

Performance Analysis of CI Engine by using Blends of Waste Plastic Pyrolysis Oil with Diesel
pp.963-966
R. Ayyasamy, P. Arunkumar and A. Manojbabu

Minimize Efficiency Loss Due to Temperature Rise in PV Arrays by Air Cooling Using Converging Duct
pp.967-969
Sathish B M, and S.Pugazhendhi

Experimental study on Phase Change Material in Low Thermal Application
pp.970-974
Prathap Magon, Pasam Bhagyalakshmi and K Rajan

Performance Investigation And Data Evaluation Of Diffuser Ejector System For Liquid Rocket Engine High Altitude Testing
pp.975-981
A.Packia antony amalan, K.Mathi, V. Ganapathy balasubramanian and V.Anumiah

Application of Teaching Learning Based Optimization (TLBO) of Condenser water loop in HVAC System
pp.982-986
D.JAYAKUMAR and D.B.JABARAJ

Performance And Emission Test On Compression Ignition Engine By Using Blends Of PongamiaJatropha With Diesel As An Alternative Fuels
pp.987-997
SENGOLERAYAN.A, KUMAR.V and DINESH KUMAR.K

COLD START EMISSION CONTROL USING TELESCOPIC CATALYTIC CONVERTER WITH HOT AIR INJECTION IN A MULTI CYLINDER SPARK IGNITION ENGINE
pp.998-1003
GANESAN MAHADEVAN and SENDILVELAN SUBRAMANIAN

EXPERIMENTAL INVESTIGATION OF A DIESEL ENGINE USING JATROPHA AND KARANJA OIL AS A BIO-DIESEL IN DIFFERENT ESTERS
pp.1004-1007
R. SENTHILKUMAR, R. MANIMARAN and N.SITHIVINAYAGAM

 

An Introduction to Wide Area Monitoring and Control
pp.1008-1011
A.Nalini, S.Manivannan and E.Sheeba Percis

[UP]

 

 

© All rights are reserved with Research India Publications                             Home  Journals  Contact