International Journal of Applied Engineering Research (IJAER)

 

 

Volume 10, Number 39 (2015)   Special Issues

 

CONTENTS

 

NUMERICAL FLOWAND HEAT TRANSFER SIMULATION OF WALL JET FLOW OVER A CURVED OBSTACLE
pp.29420-29425
P.MaheanderaPrabu, K.P.Padmanaban, P.Rajesh Kanna and Sanoop Jose

Surface Roughness Prediction Depending On Process Parameters by Response Surface Methodology
pp.29426-29429
Vasanth.B, Baskaran.M, Amal rajee and Gogulnath.B

FLOW CHARACTERISTICS OF CATALYTIC MUFFLER AND OPTIMIZATION OF DESIGN USING CFD
pp.29430-29434
Saparivel.P.P and Dr.Mathivanan.P


DESIGN AND LIFE OPTIMIZATION OF OLDHAM’S COUPLING BY USING FINITE ELEMENT ANALYSIS
pp.29435-29439
P.Saravanan and S.Hari Vignesh

ALTERNATIVE FUEL BY HOME MADE WASTE
pp.29440-29445
Mr.B.Moinudeen, S. PonAravind and P.Muthupandi

Renewable Energy Based Electrification for Rural Area Education Institutions-A Case Study
pp.29446-29451
KrishnasamiUmamaheswari and NanjundappanDevarajan

AN ERGONOMIC EVALUATION ON MANUAL MATERIAL HANDLING TASKS AND IMPROVEMENT OF OCCUPATIONAL WORKERS HEALTH
pp.29452-29456
S. Sriram Prakash and K. Maheswaran

Hybrid Flow Shop Scheduling by Modified Bat Algorithm
pp.29457-29462
T.Prabaharan, E.Naveen and M.K. Marichelvam

Effects of addition of Graphite on Hardness and Fracture Toughness in Aluminium Silicon Carbide composite.
pp.29463-29467
S.Roseline, V.Paramasivam

Effects of chemical treatment and Evaluation on Mechanical properties of Natural Fiber Reinforced Polymer Composites
pp.29468-29473
T.Amuthan and V. Paramasivam

Optimization of Turning Parameters By Taguchi method
29474-29477
R.Maheswaran and M.Jebastine Steev

Application of Lean Six Sigma in Automobile Industry : A Case Study
pp.29478-29483
Evangeline and AKumaravadivel . A

Computer Aided Analysis Of a Reactive Chemical System
pp.29484-29488
S.P.ASOK and K.SATHAM HUSSAIN

SYNTHESIS AND CHARACTERIZATION OF NANOCRYSTALLINE Al – Si ALLOY PRODUCED BY MECHANICAL ALLOYING
pp.29489-29495
A.Hari Prakash, A.Anbarasu and M.S.Senthil Saravanan

Die Sinker EDM Technology in Machining Ceramics – A Review
pp.29496-29500
P.Karthikeyan, BD.Vasudevan and C.Sathyanarayanan

Prediction of Noise, Vibration, and Harshness (NVH) of a 4 Cylinder In-Line Diesel Engine Passenger Vehicle
pp.29501-29505
V.Velmurugan, V.Paramasivam and V.Ramesh

EXPERIMENTAL INVESTIGATION ON SELF COMPACTING CONCRETE USING PLASTICIZER AND LIME STONE POWDER AS ADMIXTURE
pp.29506-29511
K.VEERAPANDIAYAN

COMPUTER AIDED ANALYSIS OF EFFUSION COOLING OF GAS TURBINE BLADE
pp.29512-29517
Th.Sarnath Singh, and S.PAsok 

Heat transfer in Fins with Closed Top under Forced Convection (Part I)
pp.29518-29522
Pragadeesh M, Shanmuga Sundaram. M, Balachandar and Venkatesan M

Heat transfer in Fins with Closed Top under Forced Convectio (Part II)
pp.29523-29527
Pragadeesh M, Shanmuga Sundaram. M, Balachandar and Venkatesan M

Simulation of the effect of Standoff Distance on Impact dynamics of tooth structure
pp.29528-29530
N. Rajesh Jesudoss Hynes, and N.J.Vignesh,

EFFECT OF ZrO2 REINFORCEMENT ON LM25 METAL MATRIX COMPOSITES
pp.29531-29534
Karthikeyan. G and Jinu.G.R

A Genetic Algorithm Optimizer for Engineering Design
pp.29535-29538
L. Ramesh Kumar, K.P.Padmanaban and C. Balamurugan

Influence of Machining Parameters on Electrical Discharge Machining of Aluminium Based Hybrid Composite
pp.29539-29543
S.Sivakumar, BK.P.Padmanaban, M.Uthayakumar and R.Srinivasan

ACHIEVING ENERGY EFFICIENCY IN CLOUD DATACENTER USING EEDVFS
pp.29544-29549
GaneshKumar.P and SathyaSofia.A

A Study on Bio-Oil Produced from Paper Waste Using Pyrolysis Process
pp.29550-29555
R.Saravana Sathiya Prabhahar, P.Nagaraj, and V.Raveendran

Investigation and Analysis of Friction Stir Welding Parameters on Mechanical and Micro-structural properties of Metal Matrix Composite (AlSiC)
pp.29556-29561
R.Karthikeyan, M.Saravanan and P.Maheandera Prabu

STRUCTURAL ANALYSIS OF FILLET WELD BASED ON THE SHAPE OF THE WELD BEAD BY USING ANSYS
pp.29562-29565
B.DHANASAKKARAVARTHI, S. SANTHOSH KUMAR and P.RAMALINGAM

A technical survey on Data Deduplication for Cloud Backup using ALG-Deduplication Scheme
pp.29566-29572
B.suganya, and K.Vimala Devi

NERVOUSNESS ADMINISTRATION WITH EXTRAORDINARY ALLUSION TO PERSONAL SEGMENT RESERVOIR HUMAN RESOURCES IN MADURAI DISTRICT
pp.29577-29584
R. GOPALAKRISHNAN, C. SWARNALATHA

Optimization of Experimental conditions of ATIG welding parameters for Mechanical properties of DSS Welds
pp.29585-29590
K. Karthick, K.Rajalingam, G.Magudeeswaran, N.Harikannan, L. Sundar, R.Hariganesh and T.Vijay kumar

The Web based Medical Diagnosis System for the Diabetes Mellitus by using Feed Forward Neural Network and Radial Basis Function Network Algorithms.
pp.29591-29596
K.Sridar, and. D. Shanthi

Implementation of Taguchi Method on Milling Operation for the Analysis of Surface Finish
pp.29597-29601
G.Uthaya Kumar, P.Ebenezer Sathish Paul and M.Ramar

MATHEMATICAL INVESTIGATION AND COMPUTATIONAL FLUID DYNAMIC MODEL OF RECIPROCATING AIR COMPRESSOR TO OBTAIN PRESSURE CRANK ANGLE
pp.29602-29609
P.Ebenezer Sathish Paul, G.Uthaya Kumar and R.Meby Selvaraj

Experimental and Analytical investigation on the performance characteristics of CI engine fueled with Tamanu oil methyl Esters
pp.29610-29616
P. Navaneetha Krishnan, D. Vasudevan

DBV-BASED PNEUMOHYDRAULIC BRAKING SYSTEM
pp.29617-29620
R.Kannan, and S.Sabareesan

Experimental Studies on Optimization of VCR Diesel engine parameters Using Taguchi Method
pp.29621-29626
S.Muthumanickam, C.Chinnasamy, A.Mohan and S.Karthik

DESIGN AND MODIFICATION OF ROASTER ASH DISPOSAL SYSTEM
pp.29627-29631
S.Sabareesan, Ramesh, Rajesh, Ranjithkumar and Siva

Minimization of inter-cell material handling cost in Dynamic environment of Cellular Manufacturing System by Using PSO Algorithm
pp.29632-29636
S.Karthikeyan, S.Sridhar, M.Saravanan, and T.Raghu John

Solving Profit Based Unit Commitment Using PSO
pp.29637-29642
S.Dhanalakshmi and J.RashmiPhilomina Angeline

Minimize clearance variation in selective assembly by using Genetic Algorithm
pp.29643-29652
P. Peter Anand Kumar, R. Maheswaran, M. Maniraj

Effects of baffles and tube materials in the shell and tube heat exchanger using Computational fluid dynamics
pp.29653-29657
Vetrivel Kumar K, Karnajothi G, Saravanan M

Simulation of a metallic cylinder with single and multi-turn coil using eddy current testing
pp.29658-29663
Nagu.S and R.Karthikeyan

PREVENTIVE MAINTENANCE OPTIMIZATION USING RELIABILITY BASED APPROACH
pp.29664-29671
J.Baskaran and ML.Mahadevan

A STUDY ON JOB SATISFACTION OF PAPER & PULP MILL EMPLOYEES in DINDIGUL DISTRICT, TAMILNADU, INDIA.
pp.29672-29678
S.JAYARAMAN and N.Brindha

DYNAMIC ANALYSIS OF SINGLE PLATE CLUTCH USING DIFFERENT FRICTION MATERIAL
pp.29679-29685
B.Arun and S.Jeyakumar

Effect Of Welding Parameters On The Weldability Analysis Of MSSM Welded By SMAW Process
pp.29686-29691
J.SURESH and V.SIVARAMAKRISHNAN

HOOP STRESS ANALYSIS OF AL/LDPE AND AL/HDPE PLASTIC PACKAGING COVERS
pp.29692-29697
C.Suganesh and K.Rajasuthan 

Application of similarity coefficient methods in feasibility and cell formation problem with operation sequence
pp.29698-29702
S.Raja, V.Anbumalar, M. Sathish and G. Naga Prasad

History of Aviation
pp.29703-29707
A.Hiran Shanth Antony, E.Immanuvel Leeban

MECHANICAL BEHAVIOUR OF ALOE FEROX WITH BANANA FIBER AS COMPOSITE
pp.29708-29712
M.Shantharaj and P.Chithambaranathan

CONTACT ANALYSIS OF LEAKAGE BEHAVIOUR OF SEAL USING CFD
pp.29713-29717
P.Raj Gokul and P.Ebenezer Sathish Paul

EFFECT OF AD MEMORY ON BUYING CONTEXT
pp.29718-29722
S.Manimaran, M.PARVEEN ROJA and D.Lavanya

Experimental Investigation on Dynamic Behavior of Nanocelluose fibril Composites for Different Weight Percentage of Fiber
pp.29723-29730
Sabariraj M.G and Balu S.

Stress Analysis and Material Selection of Composite Helicopter Blade by Using Finite Element Analysis
pp.29731-29735
P.N.Rohini and S.Nagu

AIRCRAFT EVACUATION SYSTEM
pp.29736-29739
B.DHANASAKKARAVARTHI, P.PHILEMON and N.NAVEETH IMRAN

Identification of Influencing Parameters for an Automobile Diaphragm Spring Clutch Using Design of Experiments
pp.29740-29743
M. Shanmugasiva, P.Sundara moorthi, K.Sethu barathi, R. Prasanna, T. Raja vijay and G.R. Kanna

FINITE ELEMENT ANALYSIS OF HETEROGENEOUS LEAF SPRING SYSTEM
pp.29744-29750
S.Arun and T.Ramakrishnan

Determining the effect of cutting parameters on surface roughness in Turning of AA2024 T351 reinforced with Sic using RSM
pp.29751-29754
Shyamkishore.S , Vijayakumar.K , SoundaryaDevi.A.C , Selvaraj.T , Hari Vignesh.S , Kannan G.R

Adaptive Neuro-Fuzzy Inference System(ANFIS) Based Wind Energy Generation Forecasting
pp.29755-29758
J.Booma, S.Priyadarshni,K.Mahadevan, P.Dhanalakshmi and A.J.Dhanrega

Vibration analysis of an Engine Mount in a Single Cylinder Diesel Engine
pp.29759-29764
C.Senthil kumar, .D.Vasudevan and V.Palani Selvam

A Quality And Secured Based Auditing Backup In Protected Health Information And Its Implementation Using Homomorphic Tokens
pp.29765-29770
T. Muthu Pandian, K. Bhagyalakshmi, J. Suhasini and U. Geetha

A STUDY ON NON PERFORMING ASSETS IN THE PRIORITY SECTOR REFERENCE TO PUBLIC SECTOR BANKS (PSBS)
pp.29771-29777
V.Ravikumar., S.M.Uvaneswaran and P.S.Venkateswaran

A study on consumer preference towards Branded and non branded novelty items
pp.29778-29782
E.Manju, A.Sabarirajan, P.S.Venkateswaran

STUDIES ON DIESEL ENGINE PERFORMANCE AND EMISSION CHARACTERISTICS FUELED WITH PONGAMIA PINNATA BIODIESEL AT VARIED INJECTION PRESSURES
pp.29783-29788
D. John Panneer Selvam, T.Pushparaj, K. Vadivel

Integration of feasibility assessment and cell formation problem using operation sequence and alternative routings
pp.29789-29793
S.Raja, V.Anbumalar, M.Sathis kumar, T.Nishanth kumar

Comparative Corrosion Study on Diesel and Biodiesel Fuel using CFD Analysis
pp.29794-297800
Dhanapal.T, Baskaran.M, G.R.Kannan

OPTIMIZATION OF EDM PARAMETERS FOR TUNGSTEN CARBIDE USING GREY RELATIONAL ANALYSIS
pp.29801-29805
L.Kavin Rajkumar, A.Dyson Bruno, D.Vasudevan

EXPERIMENTAL INVESTIGATION AND PERFORMANCE ON TRIBOLOGICAL PROPERTIES OF NANO FLUIDS
pp.29806-29810
S.Ganesh, J.Umar Mohamed, C.Rajaganapathy and V.Saravanakumar

EVALUATION OF ONLINE SHOPPERS' SATISFACTION TOWARDS THE SERVICES OFFERED BY E-COMMERCE SITES WITH SPECIAL REFERENCE TO ENGINEERING STUDENTS
pp.29811-29816
A. ALEESWARI, and R. Sindhya

Mechanical behaviour of fiber reinforced cementitious composite
pp.29817-29825
M.Manoj Kumar, B.Ranjith Babu and S.M.Subash

REVERSIBLE VLSI ARCHITECTURE FOR 8-POINT DCT
pp.29826-29831
M.Thiruveni and D.Shanthi

Miniaturized Microstrip Dual Band Pass Filter Using Zero Degree Feed Structures
pp.29832-29836
K. Meena alias Jeyanthi, Prithiviraj.V, Ruban.K, Praveen.P

RFID ENABLED VEHICULAR COMMUNICATION
pp.29837-29840
F.SHOBANA, and K.MEENA ALIAS JEYANTHI

Experimental Studies on Properties of Bacterial concrete using Bacillus Cereus
pp.29871-29844
S Deepa and M SivaKumar 

COMPACT PRINTED MULTI BAND ANTENNA FOR WIRELESS APPLICATIONS
pp.29845-29848
Ashwini Priyanka.K and, Meena Alias Jeyanthi.K

DESIGN OF COMPACT DIPOLE PIFA FOR WIRELESS APPLICATIONS
pp.29849-29852
K. MEENA ALIAS JEYANTHI, S.PRADEEPKUMAR, RAMAN BARNWAL and S.THIRU

An Experimental Investigation of Ballistic Impact Performance of Kevlar-29 Composite Matrix Under High Velocity Impact
pp.29853-29856
N.Fazil ahamed, L.Ganeshvenkatesh, R.T.P.Rajendrakumar, M.Udhayakumar, S.Kartheesan, H.Kanagasabapathy and C.Rajaganapathy

Performance Analysis of VCR Multi fuel Engine using methyl esters of Rubber seed oil as fuel
pp.29857-29860
S.Murugapoopathi, and D.Vasudevan

ANALYSIS OF GREEN DENSITY, SINTERED DENSITY AND VOID CONTENT PERCENTAGE OF AZ91 D MAGNESIUM ALLOY- FLY ASH COMPOSITES FABRICATED USING POWDER METALLURGY ROUTE
pp.29861-29866
C. Kailasanathan, G. Chandrasekar, Balasubramaniam nidhushan, K.Chenniyappan and V.Boomiraj

Optimal Fixture Layout for 3D Workpiece using FEA, ANN and ACA
pp.29867-29870
M.Vasundara, K.P.Padmanaban, C. Shyam Sundar

A Review on Agile manufacturing
pp.29871-29881
Bony Chrisol Joseph, N. Harikannan and S. Sridhar

Optimization of Two-Stage Hybrid Flow Shop Scheduling Problems with Missing Operations Using Meta-Heuristic Approaches
pp.29882-29887
S.Sridhar, N.Harikannan, R.Srinivas, L.Suresh and P.Thamizhanban

Comparative analysis of CI engine performance using biodiesel-diesel-ethanol blends
pp.29888-29893
M.Santhosh, D.Vasudevan, K.P.Padmanaban, K.Suriya & P.S.Soundarapandi

Bellaterra Automaton approach for Reputation Management
pp.29894-29899
K.Thiagarajan, J.Padmashree and P. Balasubramanian

Study onGraphene Structure throughFormal Language
pp.29900-29905
K.Thiagarajan, J.Padmashree

EXPERIMENTAL ANALYSIS OF SURFACE ROUGHNESS IN HARD TURNING OF OHNS STEEL (0.85 - 1.40 %C and 1.10 - 1.35 Mn) WITH CERAMIC INSERTS
pp.29906-29909
V. Prem Ananth and D.Vasudevan 

Performance and exhaust emission characteristics of diesel engine using biodiesel
pp.29910-29915
Sureshkumar.K, Vasudevan.D, Muralidharan.K, Janak Tiwari, Ghan Bahadur Thapa Magar

Preparation of Low Cost Eco-Friendly Aluminium Foam for the Application of Acoustic Attenuation
pp.29917-29921
R.Maheswaran and J.Gauthaman

Experimental analysis of smouldering combustion as a remediation technology for contaminated soil
pp.29922-29926
A.Mohamed nazeer ali and K.Jeyasubramanian

A literature review: Optimizing and analysis of parameter in pipe welding by Using TIG and MIG welding
pp.29926-29932
R.Suresh and.G.Magudeeswaran

Study the Mechanical Properties of Hybrid Aluminium 6061/Wc/Gr Composites
pp.29933-29938
P.Pandiarajan and S.Jeyakumar

Experimental and Numerical Investigation on wear behavior of AISI 4340 alloy steel
29939-29945
M.Aravindh, M.Sankaranarayanan and S.Krishnakumar

Review of Computational Analysis of Performance Characteristics of Nano Particles Blended Biodiesel Fuelled VCR Engine
pp.29946-29952
S.Karthik and K.Muralidharan

Network Representation by Formal Language
pp.29953-29955
K.Thiagarajan and R.Satheesh Babu 

DESIGN AND DEVELOPMENT OF ECOFRIENDLY DYEING MACHINE
pp.29956-29959
R.Nareshkumar and M.Anandhan

COMPRESSIVE BEHAVIOUR OF QUATERNARY BLENDED CEMENT CONCRETE COLUMN WITH GLASS FIBRE
pp.29960-29966
KANNAN and S.VIMALA

Dry Sliding Wear Characteristics of Cryogenically TreatedEn 353 Gear Steel Using Taguchi Technique
pp.29967-29973
Rama Thirumurugan and R.Praveen

Optimization of Mechanical Properties of SG iron 600-3 by Changing the chemical Composition to Improve the Machinability of Rotor Component
pp.29974-29979
P.Srirajarajan and.A.R.Suresh

FINITE ELEMENT MODELING, ANALYSIS AND PREDICTION OF IC ENGINE MOUNT DEFORMATION
pp.29981-29984
T. Ramachandran and P. Stanly

SHEAR BEHAVIOR OF REINFORCED CONCRETE BEAM WITH SPIRAL REINFORCEMENT
pp.29985-29989
ARUN SAHAYA RAJ .S and.S.VIMALA

SHAPE OPTIMIZATION AND ANALYSIS OF WINGS OF UNMANNED AIR VEHICLE
pp.29990-29997
S.Prabakaran and R.Karthikeyan

IMPACT OF IMPLEMENTATION OF QWL ON SERVICE PRODUCTIVITY AT COMMERCIAL BANKS
pp.29998-30002
S.Manimaran, N.Geethanjali and Hania Hanif

IMPACT OF ONLINE RETAILING AMONG SHOPPERS IN SMALL TOWNS
pp.30003 and 30006
S. Mani Maran, Fr. Angelo Joseph and J.John Irudaya Sudhakar,

Maglev trains and Feasibility of introducing in existing Indian railways
pp.30007-30012
V. Angel Priscilla Praveena, T. Raja vijay and G.R.Kannan

SELF COMPACTING CONCRETE BY NANOTECHNOLOGY
pp.30013-30017
Ravichandran Subbarayalu, R.Logaraja, G.Muthukrishnan, S.A.Ravikumar and D.Karuppiah

ALGORITHMIC STUDY ON DISTANCE COLOURING FOR CYCLES AND PATHS
pp.30018-30020
K.Thiagarajan and A.Veeraiah

COMPLETE NETWORK THOROUGH FOLDING AND DOMINATION TECHNIQUE
pp.30021-30026
K. Thiagarajan and P. Mansoor

TRIBOLOGICAL PROPERTIES OF NANO LUBRICANTS
pp.30027-30032
C.Rajaganapathy, D.Vasudevan and R.Kannan

Efficient Aging-Aware Reliable 8-Bit Booth Multiplier with Novel Adaptive Hold Logic Circuit
pp.30033-30037
KAMATCHI.S, C.VIVEKANANDAN

Optimal policy for non-instantaneous deteriorating items with permissible delay in payment under inflation
pp.30038-30043
R. Udayakumar, K.V. Geetha

Study on the role of surface wobbliness in the wear behaviour of Low alloy steel pin sliding on the grey cast iron disc under starved lubrication
pp.30044-30049
A.R. Suresh, and I Rajendran

Intuitionistic Anti Fuzzy Semiprimary HX Ideal In HX Ring
30050-30056
R.Muthuraj and M.S.Muthuraman

Some Properties Of Bipolar Anti-Fuzzy Normal HX Subgroup And Its Normal Lower Level Sub HX Groups
pp.30057-30063
R.Muthuraj and M.Sridharan

IMPROVING THE PERFORMANCE OF SOLAR STILL USING NANO MATERIAL
pp.30064-30072
A.Manimaran and P. Selvaraj

DEVELOPMENT OF HYBRID BASALT AND E-GLASS FIBER REINFORCED EPOXY COMPOSITE IN ADDITION OF E-WASTE AS FILLERS
pp.30073-30078
S.P.JANI, A.SENTHIL KUMAR, M.ADAMKHAN, S G JEBIN WINS and S.ARUL RAJA SINGH

PERFORMANCE ANALYSIS OF SINGLE CYLINDER DIESEL ENGINE BY USING MUSTARD OIL METHYL ESTER FOR ADVANCED INJECTION TIMING
pp.30079-30083
P.EmmanuelNicholas, M.Eswaran andV.Paramasivam

DEVELOPMENT OF HYBRID EPOXY COCONUT, E-GLASS FIBRE REINFORCED COMPOSITE WITH COCONUT FILLER
pp.30084-30089
S.P.JANI, A.SENTHIL KUMAR, M.ADAMKHAN, S.V.ABISHANTH and I.KALAI KUMAR

INVESTIGATION FOR COMPARATIVE ASSERTION OF SYNTHETIC DYE AND NATURAL DYE USING LIFE CYCLE APPROACH
pp.30090-30094
D.Immanuel christopher and M.Anandhan

 

 

[UP]

 

 

© All rights are reserved with Research India Publications                             Home  Journals  Contact