International Journal of Applied Engineering Research (IJAER)

 

 

Volume 10, Number 28 (2015)   Special Issues

 

 

CONTENTS

 


OPTIMIZATION OF KANBAN SYSTEM USING MEMETIC ALGORITHM
pp.21800-21808
Dr.G.D.Sivakumar, D.Sudarsan, P.Karuppasamy

Experimental and Numerical Investigation of Temperature Distribution in Rectangular Brick Manufacturing Chamber
pp.21809-21813
M.Dhanasekaran, M.Suresh, A.Ramakrishnan

Effect of tool chatter on turning EN 24 using stability lobe diagram
pp.21814-21817
Rajkumar.G, Ramesh kannan.C

Effect of oxygenated additives on the characteristics of a diesel engine
pp.21818-21821
K.Singaravelan, A.K.Dhivakar, M.Sivananth, S.Vedharaj

Fabrication and Analysis of Engine Valve Guide
pp.21822-21825
Mr. S. Kannan, Mr. P. Prince Packiaraj

ANALYSIS AND INVESTIGATION OF AZEOTROPIC REFRIGERANTS FOR VAPOR COMPRESSION REFRIGERATION SYSTEM
pp.21826-21829
Mr.D.Veerappan, Mr.S.Soban, Mr.P.Suresh, Mr.M.P.Karthick

TENSILE BEHAVIOR OF ALKALI TREATED NATURAL FIBER REINFORCED HYBRID COMPOSITES
pp.21830-21835
B.Nagaraja Ganesh, R.Muralikannan

ALGAE THE THIRD GENERATION BIODIESEL
pp.21836-21843
T.VinithraBanu, S.Chaitra, P.Chitra Devi, P.Arshad Mohamed Gani, G.Sakthinathan

ANALYSIS AND SELECTION OF NEW IC ENGINE FLYWHEEL MATERIAL BY FUZZY VIKOR
pp.21844-21849
S.Mohamed jaliah, S. Mothilal

EFFECT OF RADIAL CIRCULAR DISCONTINUTY ON SPUR GEAR TOOTH PERFORMANCE
pp.21450-21854
R Ravichandran, S Neelakrishnan

Reduce the defects in gate valve and thereby improving the quality of gate valve
pp.21855-21860
C.Tamilarasan, J.Umarmohammed, B.Muthuchozharajan

Determination of Non Linear Displacement in Cylindrical shell structures Using Abaqus Software
pp.21861-21866
K.Renugadevi, S.Ramesh, P.K.Devan, S.Gopinath

Investigation and Approach on 2-Stroke Petrol Engine using Bio-fuel by Taguchi Method
pp.21867-21871
E. Gurunathan, P. Serma Ganesh, M. ShanmugavelPandian,

Global Impact and Gaseous Emissions of Ethanol Bio-Diesel Blended Fuel in Diesel Engine
pp.21872-21876
N.Kanthavelkumaran, E.Kumaresh, P.Seenikannan

Survey on mechanical properties of glass - fiber reinforced composite materials
pp.21877-21882
Madhan Kumar,A, Paul Pandian,P

Process optimization of rubber seed oil based biodiesel production
pp.21883-21890
G.Palani Nathan, R.EdwinRaj, N.Saravanan, G.Pitchayya Pillai

MODELLING AND SIMULATION TECHNIQUES OF SOLAR ADSORPTION REFRIGERATION SYSTEM
pp.21891-21899
N.Saravanan, R.Rathnasamy, G.Raja, G.Pitchayyapillai

Comparison of Matrix Clustering Methods to Design Cell Formation

pp.21900-21904
G.Nagaraj, A.S. Rakesh, A.Manimaran, S.Paramasamy

PERFOEMNACE ENHANCEMENT OF ALUMINIUM - AIR BATTERY DOPED WITH MAGNESIUM AND TIN
pp.21905-21909
Prem Kumar S, Deepak Kumar M

Production and Characterization of Biodiesel Derived from Coconut Shell
pp.21910-21914
A.Shyam Sundar, K.M.Ahamed Sheriff, R.Ravichandran

Experimental Investigation of Low Temperature Storage in Household Refrigerator Using PCM
pp.21915-21919
Sridhar K, K.Karuppaswamy, Ramkumar J

Study on Effect of Pulsed GMAW welding Parameters on the weld quality of Grade 91 materials
pp.21920-21924
R.Ravisankar, S.Sathish, J.Suresh, N.Rajasekaran

Study and Observationof theCharacterizationof Nano materials for Electro-Mechanical Applications
pp.21925-21928
M.Ramuvel, A.Manimaran,

Design and Analysis of KFRP LPG Cylinder using ANSYS Software
pp.21929-21932
K.Sarbudeen, B.Muthuchozharajan

A study on HR Planning and employee satisfaction of selected sugar mills in Madurai
pp.21933-21936
S.Sekar, R.Vignesh, J.Prawin,

A STUDY ON BRAND LOYALTY BEHAVIOUR AMONG THE CUSTOMERS TOWARDS BRANDED SHIRTS
pp.21937-21945
P.S.Venkateswaran, A.Sabarirajan

A STUDY ON THE INFLUENCE OF PERCEIVED QUALITY, PURCHASE INTENTION AND CUSTOMER SATISFACTION TOWARDS BRAND LOYALTY FOR BRANDED COFFEE POWDERS (INSTANT) IN MADURAI
pp.21946-21958
P.S.Venkateswaran, B.Arun, S.Sakthivel, Earnest Paul

Comparative study on Quality of Standards in Engineering colleges with respect to Staff and Students
pp.21959-21968
Ms.C.Neelaveni, S.Manimaran, P.S.Venkateswaran

A Study on Organizational citizenship behavior and Organizational commitment and their impact on organizational learning among the employees of spinning Mills
pp.21969-21972
A.Sabarirajan, P.S.Venkateswaran, B.Arun, S.Jayaraman

A Review and Investigation on Carbon Fiber with Hybrid Nano Composites
pp.21973-21978
K.Thavasilingam, V.Ramachandran, G.Satheesh Kumar, S.Devanand, R.Madhavan

DESIGN OF DOUBLE COLUMN AND MULTI ROW MACHINE CELL LAYOUT
pp.21979-21984
P.V. Arul kumar,. M. Saravanan

An implementation of mechanical and tribological properties of polymer matrix Composites
pp.21985-21989
S.Sathees Kumar, G.Kanagaraj, N.Pandiarajan, J.Murugesan

Structural Studies of Nano Dielectric Substrate Material for millimeter wave Antenna
pp.21990-21993
Vasant Naidu, D.John Pragasam

Polymers Matrix Reinforced With Natural Fibers: A Study on Interfacial Behavior
pp.21994-22000
Antony Vincent V, C.Kailasanathan

Design and Analysis of Helical spring for Suspension system.
pp.22001-22007
Vijayabalan.M, Karthikeyan.A.Karthik.K

Temperature Control of Fuel Charge in S.I Engine Using Peltier Effect
pp.22008-22015
S.BharathiManohar, T.Gangadharan, V.Anandh, R.BalaChandar,

Impact of Education In Women Empowerment
pp.22016-22019
J.Vijayadurai, K. Marammal Devi, A. Subburaj, N.Mohammad Syed Alikhan

Random ordering method of selective assembly for optimizing maximum assembly using real coded genetic algorithm
pp.22027-22034
G.K.Thamilselvan, SM.Kannan

A Study of Implementing Lean Manufacturing Technique in Paint Shop Floor of an Tractor Manufacturing Company
pp.22035-22039
C.Prasath, P.Meenatchisundaram, S.Prushothaman, T.P.Balaji

Productivity Enhancement by Balancing Takt Time in a Cellular Manufacturing Industry
pp.22040-22044
G.Nagaraj, A.Manimaran, S.Sheik Syed Abuthahir, A.S. Rakesh, S.Paramasamy

Evaluation of Evaporative Heat Transfer Characteristics of Co2/Propane Refrigerant mixtures in a smooth horizontal tube using CFD.
pp.22045-22050
U.Arunachalam, S.Sorna Senthil, P.Seeni Kannan, P.Sivakumar

Adaptive Modulation and Coding Techniques for Heterogeneous Mobile Wireless Sensor Networks
pp.22051-22057
M. Sheik Dawood, M.Ayyanar, G. Athisha

MULTI RESPONSE OPTIMIZATION OF EDM PROCESS PARAMETERS IN Al 6061 USING RSM
pp.22058-22064
Panneer Selvam M, Ranjith Kumar P, Murali K

Design of automatic moving bed vector machine for simultaneous identification of blood group with image processing
pp.21065-22068
P.Jayakumar, G.P.Rajamani,

An Automated Segmentation Algorithm for Dental Cyst using Dual Threshold Binary Decomposition
pp.22069-22074
R.Karthika Devi, A.Banumathi, G.Ulaganathan

Hybrid Solar PVTSystembasedon NeuralNetworkModels totrackOptimalThermalandElectricalpower
pp.22075-22081
C.Ramesh, S.Sivakumar, T.Prabhu, J.Kumar

An Investigation on effect and mechanical behavior of natural composite by Triticum aestivum husk and Tamarind kernel powder
pp.22082-22085
A.Alagarraja, V.Veerakumar

Study of Mechanical Behaviour of Cow Bone with Egg Shell particulated Polyester Polymer Composite
pp.22086-22089
A.Ragupathi, V.Veerakumar

Energy Efficient Distance based Clustering Protocol for Wireless Sensor Networks
pp.22090-22095
M.Sheik Dawood, G.Athisha, R.Abdul Sikkandhar

Increase the Solar Still Performance using various Energy absorbing materials
pp.22096-22101
A.Manimaran, P. Selvaraj

Maintenance Cost Analysis of 4 Stroke Petrol Engine Based on Emission Test
pp.22102-22104
T.Prabhaharan, B.Saravanan,

Image Recognition Methodology for Identifying Recyclable Components from Waste Printed Circuit Boards
pp.22105-22109
P.Meenatchisundaram, M.Elango, C.Prasath

A mechanism of bio - chemic physical treatment system for hospitality microbial contamination textiles
pp.22110-22115
Jayakumar.P, S.Mothilal, G.P.Rajamani, R.Selvabharathi

Mechanical and Wear Properties of Magnesium Matrix Reinforced with Boron carbide.
pp.22116-22120
P.R.Rajkumar, C. Kailasanathan, R. Chandru, A. Meeran, Mohammed Ashif, I. Vijay Arasu,

Adaptive Neuro-Fuzzy Inference System for Classification of Respiratory Signals using Cepstral Features
pp.22121-22125
N. Kins Burk Sunil, R. Ganesan

 

 

[UP]

 

 

 All rights are reserved with Research India Publications                             Home  Journals  Contact