International Journal of Applied Engineering Research (IJAER)

 

 

Volume 10, Number 19 (2015)   Special Issues

 

 

CONTENTS

 

PERFORMANCE OFMAGNESIUM ALLOY REINFORCED WITH SILICON CARBIDE CONNECTING ROD FOR S.I ENGINE
pp.13674-13676
M.Karthe, B.Vivek Richard

DEVELOPMENTOF ALDEHYDE REDUCTION TECHNIQUES FOR GASHOL FUELED SI ENGINE
pp.13677-13679
I.IILAMPARTHI, M.KARTHE

Biodiesel Production From Waste Palm Oil By Transesterification Process

pp.13680-13685
Joses Jenish Smart, S. Antony Raja, C. Lindon Robert Lee, D. S. Robinson Smart

Experimental study of mixture formation in biodiesel spray with preheated fuel
pp.13686-13691
P Raghu, R Srinivasan, R Gowtham, N Nallusamy

Experimental Investigations on the Effect of Compression Ratio on SI Engines Using Fuel Additives
pp.13692-13697
Sathishkumar.S, Chinnasamy.C

Effect of Ethanol Blend Addition onPerformance and Emission of Diesel Engine Operated with Pongamia Methyl Ester
pp.13698-13700
R.Silambarasan, R. Senthil, G.Pranesh, P.Mebin Samuel

An Experimental Investigation on Performance and Emission Characteristics of Rubber Seed Oil Blends In a DI Diesel Engine
pp.13701-13703
R. Senthil, E.Sivakumar, R.Silambarasan, P.Mebin Samuel, G.Pranesh

Analysis of Emission Characteristics on Direct injection Engine using biodiesel with MgO.
pp.13704-13713
Ganesan.S, A.Elango, Amit pratap shah, Abhishek Kumar Sinha

Combustion Studies On a CI engine Using Bio oil Obtained From Pyrolysis of Prosopis Juliflora as Fuel
pp.13714-13719
K.Venkatesan, M. Senthil Kumar

PERFORMANCE AND COMBUSTION ANALYSIS OF CI ENGINE OPERATED ON TRANSESTERIFIED CARBOXYLIC FATTY ACID
pp.13720-13725
L.Senthil Kumar, Abishek Joel.J, Sibichakravarthy .M, Mr.Eazhil .K.M

Seventeen degrees of freedom ride dynamics model of a tracked vehicle in Simmechanics
pp.13726-13737
Venkatasubramanian.N, S.Jayaraj, Saayan Banerjee, V.Balamurugan

EXPERIMENTAL INVESTIGATION FOR THE MACHINING OF Al-SiC NANO COMPOSITES USING RESPONSE SURFACE METHOD
pp.13738-13746
S.Vivek, S.Vijayraj, G.Prabhu, J.Varun Mohan Singh

NUMERICAL ANALYSIS OF AUTOMOBILE CABIN TEMPERATURE VARIATION WITH DIFFERENT SUN SHADES FOR ITS WINDOWS AND REAR WIND SCREEN GLASSES
pp.13747-13754
M.ASHOK, Dr. N. SHENBAGA VINYAGA MOORTHI, Dr. S. NEELAKRISHNAN

PERFORMANCE AND EMISSIONS OF A DICI ENGINE WITH BIODIESEL FOR VARIOUS COMBUSTION CHAMBER GEOMETRY
pp.13755-13762
S.Arumugam, Dr.K.Pitchandi, M.Arventh, P.Maheskumar

AN EXPERIMENTAL INVESTIGATION ON MECHANICAL PROPERTIES OF SELF COMPACTING CONCRETE CONTAINING METAKAOLIN
pp.13763-13768
Mrs. V.Brindha, Mr.D. Prasannan, Ms. S. Amutha

EFFECT OF NATURAL VISCOSITY MODIFIERS IN CONCRETE
pp.13769-13773
S.Ram Kumar, R.Selvaraj

Electrochemical Durability Test For Light Weight Concrete
pp.13774-13777
B.Karthikeyan, Dr.R.Selvaraj, Dr.S.Saravanan

EVALUATION OF ANTI CORROSIVE COATINGS FOR STEEL REINFORCEMENT IN CONCRETE STRUCTURE
pp.13778-13783
R.Priyanka, R.Selvaraj

EVALUATION OF GEOPOLYMER BASED ANTI CORROSIVE COATINGS FOR STEEL REBARS
pp.13784-13790
S.Vanathi, Dr.R.Selvaraj, Mrs.P.Janaki

STUDY ON THE PERFORMANCE OF GEOSYNTHETICS IN FLEXIBLE PAVEMENT SYSTEM
pp.13791-13795
RAJAKUMAR C, MEENAMBAL T

CHEMICAL ANALYSIS OF EXPANSIVE SOIL UNDER THE INFLUENCE OF BAGASSE ASH
pp.13796-13800
RAJAKUMAR C, MEENAMBAL T

PARTIAL REPLACEMENT OF CEMENT BY RICE HUSK ASH IN POLYSTER FIBER REINFORCED CONCETE
pp.13801-13808
S.MEHALA

EXPERIMENTAL INVESTIGATION ON COLD FORMED STEEL I-BEAM SECTION WITH DIFFERENT CORRUGATED PROFILE SHEET AS WEB
pp.13809-13813
SIVA PRAKASH V, K PRASAD BABU

EXPERIMENTAL INVESTIGATION ON HYBRID FIBRE REINFORCED CONCRETE
pp.13814-13819
SUBATHRA S, VIDHYA K

ASTUDY ON THE INFLUENCEOF ISO QUALITY MANAGEMENT SYSTEM FOR THE IMPROVEMENT OF CONSTRUCTION PROJECT PERFORMANCE
pp.13820-13825
Mrs.P.Karthikadevi, Mr.K.Chandrasekar

EXPERIMENTAL INVESTIGATION ON STRENGTH AND DURABILITY PERFORMANCE OF GEOPOLYMER CONCRETE
pp.13826-13830
DIVYA A, Dr.K JAGADEESAN

EXPERIMENTAL STUDY ON CONCRETE WITH SOIL AS REPLACEMENT OF FINE AGGREGATE
pp.13831-13835
Dr.K.Ramadevi, M.Shanmuga priya

UTILIZATION OF LATHE WASTE AS SLURRY INFILTRATED FIBROUS CONCRETE (SIFCON)
pp.13836-13840
Dr.K.Ramadevi, S.Esther Suganya

Improvement of flocculation efficiency by optimizing physical and chemical parameters in the treatment of dairy wastewater.
pp.13841-13855
Dr. T. Meenambal, G. Aswin Sriram

Ambient Air and Ground Water Quality Status around the SIDCO Industrial Cluster Region in Coimbatore City
pp.13856-13860
Kamal B., Isaac Solomon Jebamani M., Rajalingam P., Balasubramanian S.

OPTIMIZATION OF COMPOSITE LAMINATES USING SIMULATED ANNEALING ALGORITHM USING DIFFERENT FAILURE CRITERIA
pp.13861-13868
Vignesh Chellappan. N, Surajit Das

INVESTIGATION ON COLD FORMEDSTEEL-I SECTION COLUMN WITH CORRUGATED SHEET AS WEB
pp.13869-13872
Mr. VENGATESH A S, Prof. PRASAD BABU K

EXPERIMENTAL INVESTIGATION ON COLD FORMEDSTEEL-I SECTION COLUMN WITH CORRUGATED SHEET AS WEB
pp.13873-13877
Mr. VENGATESH A S, K PRASAD BABU

Earthquake Protection of Buildings by Base Isolation Systems: Concepts and Practices
pp.13878-13881
S.Gayathri, P.Sivakumar

A COMPARATIVE STUDY OF CONVENTIONAL BUILDING WITH STEEL CONCRETE COMPOSITE STRUCTURES
pp.13882-13885
P.S.Pilomina, Mr.D.Pradeepkumar

Strength Studies on Self Curing High Performance Fibre Reinforced Concrete(HPFRC)
pp.13886-13890
Shibin.C.Haroon, Dr.V.Sreevidya, Dr.R.Venkatasubramani

STRENGTH STUDY ON FIBRE REINFORCED CONCRETE USING MAGUEY FIBER
pp.13891-13894
Gopinath G G, S. Yuvaraj

STRENGTH STUDY ON FIBER REINFORCED CONCRETE USING PALMYRA PALM FIBER
pp.13895-13898
MAHENDRAN.K, YUVARAJ.S

Strength Studies On Geopolymer Mortar By Blending Silica Fume With Flyash
pp.13899-13902
P.T.Ayswariya Lakshmi, Dr.V.Sreevidya, Dr.R.Venkatasubramani

Strength Characteristic of fly ash based Geopolymer concrete Electric poles at early age of 3days.
pp.13903-13911
S. Muthuramalingam, R. Thenmozhi

The influence of alkaline activators and curing Temperature on the properties of Geopolymer Concrete
pp.13912-13919
S. Muthuramalingam, R. Thenmozhi

Partial Replacement Of Fine Aggregate With Quarry Rock Dust And Marble Sludge Powder In Concrete
pp.13920-13924
S.Ramaraj, Dr.M.Lenin Sundar, Dr.R.Venkatasubramani

Strength Study Of Flyash Based Fibre Reinforced Concrete
pp.13925-13928
Christin Jose, Dr.V.Sreevidya, Dr.R.Venkatasubramani

Influence of Bacteria on Strength and Self-Healing Characteristics of Fly Ash Concrete
pp.13929-13933
A.Anto Edison James, V.Poornima, Dr.R.Venkatasubramani

Effect of Metakaolin on Strength Characteristics of High Strength Concrete
pp.13934-13938
Vysakh P. K., M. Seethapathi

Experimental Study on Concrete Using Lime Stone Powder as Partial Replacement of Fine Aggregates
pp.13939-13942
PM.Nagaraj, A.sangeetha, Dr.R.Venkatasubramani

Experimental Investigations On Concrete Using Industrial Wastes
pp.13943-13947
G.Vigneswaran, A.Vennila, Dr.R.Venkatasubramani

STUDY ON MECHANICAL PROPERTIES OF CONCRETE REPLACING EOF STEEL SLAG AS FINE AGGREGATE
pp.13948-13952
R.Malathy, R.Deepha, M. Arivoli

Study on the Flexural Behaviour of Fibre Reinforced and Prefabricated Cage Reinfoced Concrete Beams
pp.13953-13958
Sabna Ashmi H, Chithra R, Chithra S

A STUDY ON CRITICAL FACTORS INVOLVED IN EQUIPMENT MANAGEMENT AFFECTING THE PERFORMANCE OF CONSTRUCTION PROJECT
pp.13959-13963
S.Sathya bama, S.D.Jagadeesh

Investigating Strength Properties of Concrete Incorporating Flyash & Silicafume In Cement And Replacing River Sand By Foundry Sand & MSand
pp.13964-13967
A.Jesudass, A.Sangeetha, Dr.R.Venkatasubramani

Experimental Study On Strength Properties Of Diaphanous Concrete With Vermiculite
pp.13968-13970
P. Santhosh Murugan, Dr.M. Devasena, Dr. R. Venkatasubramani

Durability studies on High Performance concrete using Different Mineral admixtures
pp.13971-13974
Dr. R. Anuradha, T.Nalavendhan, K. Adhi Gajendran

Durability Studies on Self Compacting Geopolymer Concrete using different Mineral Admixtures
pp.13975-13978
Dr. R. Anuradha, R. Dinesh Kumar, T. Usha

NUMERICAL MODEL FOR REHEABILITATION OF REINFORCED CONCRETE BEAM STRENGTHENED WITH ULTRA HIGH STRENGTH CONCRETE USING ANSYS
pp.13979-13985
Prasannan.D, Dr. Premalatha. J, Dr. Deepa Shri. S

Flexural Behaviour Of Light Weight Reinforced Concrete With CPVC-AL-CPVC Pipe
pp.13986-13989
S.Dhamotharan, Dr.M.Lenin Sundar, Dr.R.Venkatasubramani

Development of Self Compacting Concrete Using Mineral Admixtures Obtained as Industrial Wastes
pp.13990-13995
S. Suchithra, R. Malathy

Stregth Study On Self Curing High Performance Steel Fibre Reinforced Concrete Using Super Absorbent Polymers
pp.13996-14000
R.Sathishkumar, Dr. V. sreevidya, Dr. R .Venkatasubramani

EXPERIMENTAL STUDY AND BEHAVIOUR OF HIGH PERFORMANCE CONCRETE USING GRANITE WASTE
pp.14001-14005
Mrs.BHAGAVATHI PUSHPA.T, Mr.PANDIAN.S

Experimental Investigation On Engineering Cementitious Composities
pp.14006-14010
Ranjith S, Dr Venkatasubramani R, Sanal Kumar C.A, Selvapriya V

A Study On Microbial Concrete By Using Quarry Dust As Partial Replacement Of Fine Aggregate
pp.14011-14015
B.Vignesh, V.Poornima, Dr. R.Venkatasubramani

An Experimental Study on the Influence of Light weight Aggregate in Self Curing Concrete
pp.14016-14020
Chithra R, Sunilaa George, Deepa Shri S, Chithra S, Sabna Ashmi H

Effect of Bacillus Subtilis on Biocrete Using Silica Fume
pp.14021-14025
D. Gowtham, V. Poornima, Dr. R. Venkatasubramani

Investigation on concrete with E-plastic waste and Micro silica
pp.14026-14030
P.sasikala, G.T.Koteeswaran

Experimental Investigation on PET Fiber Reinforced Concrete
pp.14031-14034
A.Subalakshmi, V.Anandhi

BEHAVIOUR OF BEAM COLUMN JOINT WITH SLAB EFFECT UNDER CYCLIC LOADING
pp.14035-14045
R. REVATHI, DR. V. G. SRISANTHI

Use of Industrial Waste as Partial Replacement of Sand for Self-Compacting Concrete
pp.14046-14049
Alvin Joe Raphel, A. Vennila, Dr. R. Venkatasubramani

COMPARITIVE STUDY ON SEISMIC BEHAVIOUR OF RC FRAME WITH ORDINARY BRICK AND FLY-ASH BRICK FOR SHEAR WALL AND BASE ISOLATION
pp.14050-14053
K.Siddharth, S.Keerthana, M. Alagendran

Analytical investigations on flexural behaviour of HPC beams with copper slag as partial replacement of fine aggregate using ABAQUS
pp.14054-14058
Chithra.S, Dr.S.R.R.Senthil Kumar, Dr.K.Chinnaraju, Prabhu.S, Chithra.R

Investigation on Concrete Using Steel Slag as a Partial Replacement of Fine Aggregate
pp.14059-14063
Vishnu Priya.M, Krishnamoorthy.A

Steel Structural Optimization using Pre-Engineered Building Technique for Gas Insulated Switchgear
pp.14064-14069
S. Rajasekar

Strength Parameters of Mortar and Concrete with Wood Ash as a Partial Replacement of Fine Aggregate
pp.14070-14074
BRINILA BRIGHT B.N., PANDEESWARI. K.

Strategic Cost Analysis on Utilizing Construction Equipments
pp.14075-14080
Mr. M. Dhivakar Karthick, Prof. K. Thirumalai Raja

IDENTIFICATION OF UNCERTAINTY FACTORS AFFECTING CONSTRUCTION PROJECTS
pp.14081-14084
B.Fahathul Aziz, D.Senthil Kumar

Study Of Hybrid Fibre Reinforced Concrete With Partial Replacement Of Sand By Foundry Sand
pp.14085-14087
V.Akila, A.Vennila, Dr.R.Venkatasubramani

Strength Studies On Geopolymer Concrete Using Steel And Polypropylene Fibres
pp.14088-14092
T.S.B.Damu, J. Thaarrini, Dr.R.Venkatasubramani

Strength Studies OnGeopolymer Concrete Using Steel And GlassFibres
pp.14093-14097
S.Elavarasan, J.Thaarrini, Dr.V.Sreevidya, Dr.R.Venkatasubramani

Analysis and Design of Structure Subjected to Blast Load
pp.14098-14102
K. vishnu vardhan

EXPERIMENTAL STUDY ON STABILIZATION OF CLAY SOIL USING WASTE FOUNDRY SAND
pp.14103-14108
G.M.SriRamachandran, Dr. P.D.Arumairaj

Micro-Structural Studies on Interface Properties of Pozzolanic Cementitious System
pp.14109-14114
Tejaswini. P. Swami, Dr.A.Sivakumar

EXPERIMENTAL EVALUATION ON THE REINFORCING EFFICIENCY OF DISCRETE AND ALIGNED STEEL AND POLY PROPYLENE FIBRE COMPOSITES
pp.14115-14119
Athiyamaan .V, Dr.A.Sivakumar

Cost Control Technique In Building Construction
pp.14120-14124
Aarthi.T.R, Sasikumar.V

A Comparative Study on mechanical properties of Concrete Containing Different Admixtures as Partial Replacement of Cement
pp.14125-14129
C.MOHANASELVAN, P.RAVICHANDRAN

ASSESSMENT OF THE SIGNIFICANT FACTORS AFFECTING THE COST PERFORMANCE IN CONSTRUCTION PROJECTS
pp.14130-14135
B.RAJKUMAR, S.SIVAPRAKASAN

FLEXTURAL BEHAVIOUR OF SELF COMPACTING CONCRETE BEAMS WITH SILICA FUME AND FLY ASH USING ANSYS
pp.14136-14141
Mrs. R. Manju, Dr.J. PREMALATHA, A.Antlin Stella

Mechanical Properties of Reactive Powder Concrete at Different Curing Regimes
pp.14142-14146
Parameshwar, Subhash C Yaragal, Sharankumar, S.M. Murnal

ANALYSIS OF LABOUR RISK INVOLVED IN CONSTRUCTION INDUSTRY
pp.14147-14152
Ms. P.Sharmila, Prof K.Thirumalai raja

APPROPRIATE SELECTION OF EQUIPMENT IN HIGH RISE BUILDINGS
pp.14153-14158
Mr.S.Dineshkumar, Guided by Mr.V. Rajesh kumar

Effect of Bracing Configuration on the Seismic Response of Steel Structures
pp.14159-14163
Basil Baby, Pradeep Kumar D.

A Study on Expenditure Variation Between Green Building and Conventional Building
pp.14164-14169
Ms. M. Dharani, Mr. M. Sasi Kumar

Effective selection of Formwork for High-rise buildings
pp.14170-14172
P. Gokuldeepan, V.Rajeshkumar

Transverse vibration of free-free beams carrying two unequal end masses using Differential Transformation Method
pp.14173-14175
Dona Varghese, M.G Rajendran

EXPERIMENTAL INVESTIGATION ON LIGHT WEIGHT CONCRETE COMPOSITES WITH BAMBOO REINFORCEMENT
pp.14176-14181
Ahana K S, S.Loganayaki, D. Tensing

Bio-Kinetic analysis on treatment of Textile dyeing wastewater using Hybrid up-flow anaerobic sludge blanket reactor
pp.14182-14185
GopalakrishnanV, SujiMohankumar

Development of Mix Design Procedure for Self Compacting Concrete-State of art
pp.14186-14190
Mrs. R.Manju, Dr. .J. PREMALATHA, RAMAKRISHNAN. D

Behavior of Corroded RC Beams Containing Nano-Silica.
pp.14191-14193
G Angelin Lincy R Vandhiyan, Dr.E B Perumal Pillai

SEISMIC DISASTER MITIGATION USING VISCO ELASTIC DAMPERS
pp.14194-14199
N. Divyah, R.Sreekala, K. Sathish Kumar, N. Gopalakrishnan, G. Senthil Kumar

INVESTIGATION ON THE SEISMIC RESPONSE OF SPECIFICBUILDINGS
pp.14200-14205
K.N. Karthika, R.Sreekala, K. Muthumani, N. Gopalakrishnan, R. A. B. Depaa

PROPOSAL, DESIGN AND NON LINEAR ANALYSIS OF SIMPLY SUPPORTED PRESTRESSED POST TENSIONED GIRDER OF 31 METER SPAN
pp.14206-14209
Jeeva Sathiyan, Dr. M. Helen Santhi

OPTIMAL DESIGN OF R.C ELEMENTS
pp.14210-14215
Dr.Arunachalam.N, Ms.Karthiga.N, Prakash.T

PRESTRESSED CONCRETE HYPERSTATIC STRUCTURES
pp.14216-14221
T.NIVETHA SREE, Dr.N.ARUNACHALAM

Study of Confined Hybrid Fibre High strength Over Reinforced Concrete
pp.14222-14233
Zealakshmi D, Ravichandran A, Kothandaraman S K

A Study on Effect of Ergonomics Risk Factors in Construction Workforce Efficiency
pp.14234-14238
Subha.M, Sasi Kumar.M

AN ANALYTCAL INVESTIGATION ON ELEVATED WATER TANKS
pp.14239-14243
S.M.Janani, R. Sreekala, K. Muthumani, N. Gopalakrishnan, P.Kalimuthu

AN INVESTIGATION ON STRENGTH AND DURABILITY OF POLYMER MODIFIED CEMENT CONCRETE
pp.14244-14247
SP. Senthinathan, T.Bahavathipushpa

Study and Optimization Model for Integrated Municipal Solid Waste Management in South Zone of Coimbatore
pp.14248-14252
S.Karthiyayini, Dr.R.N.Uma

IDENTIFICATION OF CAUSES AND IMPACTS OF TIME OVERRUN IN CONSTRUCTION PROJECTS
pp.14253-14261
U. SINDHU VAARDINI, Dr.K.SUBRAMANIAN

Sewer Pipe Network Optimization Using Multistage GA
pp.14262-14266
Mohanapriya S., Sanjay Kumar R.

EXPERIMENTAL INVESTIGATION ON PROPRTIES OF HYBRID FIBER REINFORCED CONCRETE
pp.14267-14275
R.Nimisha

An Endeavour For Accomplishing Hypo Sludge As A Construction Material
pp.14276-14279
Mr. B. Pradeep, Mr. P. Velumani, Dr. S. SenthilKumar

FLEXURAL BEHAVIOUR OF COMBINED STEEL AND POLYPROPYLENE FIBRES IN REINFORCED CEMENT CONCRETE
pp.14280-14284
S.Noorulla, T.Bhagavathipushpa

AN EXPERIMENTAL STUDY ON SELF COMPACTING CONCRETE BY USING CORROSION INHIBITOR
pp.14285-14291
R.DHARMARAJ, Dr.R.MALATHY

Study on Effect of Fineness and Pozzolanic Reaction of Fly Ash on Mechanical Properties of Cement Mortar
pp.14292-14297
L. Krishnaraj, D. Joshua Giftson, L.Tamilvannan, P.T. Ravichandran

Behaviour of Self Compacting Geopolymer Concrete Using Sustainable Construction Materials
pp.14298-14302
T.G.Ushaa, R.Anuradha, G.S.Venkatasubramani

Study on Usage of Sludge of Domestic Waste Water Treatment Plant in Concrete
pp.14303-14309
G.Divyasankari, M.H.Hayath Bashaand M. Parthasarathy

A STUDY ON INVENTORY MANAGEMENT SYSTEMS IN CONSTRUCTION INDUSTRY
pp.14310-14312
NareshKumar.V, Mrs.L.Reena

A STUDY ON FACTORS INFLUENCING REWORKS IN CONSTRUCTION PROJECT
pp.14313-14318
Mr.C.Nandhakumar, Guided by Mr.S.Ranjith

IMPROVING PRODUCTIVITY IN CONSTRUCTION INDUSTRY
pp.14319-14322
Mr.M.Saravanan, Mr.V. Rajesh kumar

EFFECT OF COALASH WITH GEOSYNTHETICS IN THE STABILIZATION OF EXPANSIVE SOIL FOR THE PAVEMENT
pp.14323-14327
T. Muppidathi, Dr. T. Meenambal

SECONDARY TREATMENT OF SEWAGE EFFLUENT BY ANAEROBIC UPFLOW FILTER
pp.14328-14333
R.M.Palanisamy. C.H.Gopalakrishnan

An investigation on the effect of fillers on the Properties of Self Compacting Concrete (SCC)
pp.14334-14345
SAKHIMOL B, MANJU R. Dr.J.PREMALATHA

PROPOSING RURAL DRINKING WATER SUPPLY PROGRAMME - A CASE STUDY USING RS&GIS IN ERODE DISTRICT
pp.14346-14349
P.MUTHUKUMAR

STUDY OF CRACK DEVELOPMENT ON DEEP BEAMS WITH AND WITHOUT FRP WRAPPIN
pp.14350-14355
C.Chinnaraj , D.Prasannan, U.Balavignesh, A.Sagaya bastina

Experimental Studies On Geopolymer Concrete Using Flyash And GGBS
pp.14356-14359
Tobin T Kunnath, Dr.V.Sreevidya, Dr.R.Venkatasubramani

Optimization of Layout under Dynamic Environment in Cellular Manufacturing Systems
pp.14360-14365
C.Ramesh, K.Arun Prasath, N.Raghul raj

Layout Optimization by Solving Cell Formation Problem in Piston Ring Manufacturing Process Industry
pp.14366-14371
K.Arun Prasath, A.Sivamani, S.Anbarasan, S.Suriyapradheep, R.Vigneshwaran

Comparison of coatings based on nano and commercial Titanium Dioxide as pigment on mild steel substrates
pp.14370-14374
Prof.C.Ramesh, V.Arun, K.S.Arun Arumgam, P.Elancheliyan, S.Kavin

An Evaporative Air Cooler and Desiccant Wheel Based Air Conditioning for Humid Regions of INDIA
pp.14375-14378
Sagar Dasgupta, Dr. Anuj Jain, Neeraj Kumar Singh

Development of CAPP System using CATIA feature extraction for Job shop environment
pp.14379-14385
S.Dharani Kumar, K.K.Natarajan, Dr.C. Krishnaraj

EXPERIMENTAL ANALYSIS OF HEAT TRANSFER RATE IN PIN FIN MATERIAL WITH MICRO COATING
pp.14386-14397
Mr. V.P.SURESH KUMAR, Mr. N. MANIKANDAN, Mr. K. KRISHNA KUMAR

Investigation on Direct Solar Drier for Drying Lady’s Finger by Natural Convection
pp.14398-14401
R.Srinivasan, Dr.T.Balusamy

ANALYSIS OF THE EFFECT OF GADOLINIUM ZIRCONATE AS THERMAL BARRIER COATING ON PISTON CROWN
pp.14402-14405
Venkatramanan R, Kumaragurubaran SB, Vishnu Kumar C, Sivakumar S, Saravanan B

Performance Analysis of Drilling Attachment for a Conventional Lathe
pp.14406-14410
G.Gnanakumar

Anaerobic Digestion of Hostel Food Waste and Toilet Waste in a Fixed Dome Type Digester
pp.14411-14416
A.Vijin Prabhu, S. Antony Raja, T.V. Christy, C. Lindon Robert Lee

Parametric Analysis of Abrasive Water Jet Machining Processes by Taguchi Method
pp.14417-14420
Vasantha Prasath N, Vijayakumar R, Anilbasha K, Vasanth A

DRY TURNING OF ALUMINIUM SILICON ALLOY USING DIAMOND LIKE CARBON AND DIAMOND COATED TUNGSTEN CARBIDE INSERTS AND EVALUATION OF ITS CUTTING PERFORMANCES
pp.14421-14427
Indhu. R, Balasundar.P, Anburose.D, Vikas.V, Terrin Babu , Hariharan.P

Microstructural and Microhardness analysis of Pulsed Nd:YAG Laser Welding of AISI 420 Steel and 5754 Aluminium Alloy
pp.14428-14432
N.Hari Narayana, Dr. Josephine Peter, Dr. Channankaiah

A New Approach to Generate Dispatching Rules for Multi-Objective Flow Shop Scheduling Problem Using Metaheruristics
pp.14433-14436
C.Manikandan, Dr.R.Rajkumar

OPTIMIZATION OF PYROLYSED CARDANOL AS BIOFUEL
pp.14437-14439
Sivakumar S, Chris Anu John, Elanchezhian P, Suresh S

Optimization on sliding wear behavior of AISI 4340 alloy steel
pp.14440-14444
M.Aravindh, Mr.M.Sankaranarayanan

PERFORMANCE ANALYSIS OF SOLAR STILL USING COWDUNG CAKES MIXED WITH COIRPITH
pp.14445-14449
S.Sivakumar, Dr.P.Seenikannan, R.Ananda kumar, Dr.C.Kailashnathan

Numerical Investigation on the influence of current in machining of AlSiC using Wire EDM
pp.14450-14453
N.Rajesh jesudoss hynes, Anish.M

Natural computing-Solutions from Nature to the Real Life Industrial Problems
pp.14454-14458
L.Ramanathan

Heat Transfer Simulation of Electronics Enclosure with Heatpipes
pp.14459-14463
V.Manoj kumar, Dr.R.Rajkumar, Dr.N.Bose

Finite Element Analysis and Analytical Calculation of Residual Stress in a Flash Butt Welded Rail
pp.14464-14469
S. Rohit, C.A.K. Arumugam, N. Naganambi

Influence of Coir on Mechanical Properties Of Pineapple Leaf Fibre Composite
pp.14470-14475
G.K.E Magesh, G.V.Dellibabu, B.N.Raju

Computational study of the aerodynamics of the gliding snake Chrysopelea Paradisi
pp.14476-14479
Vigneshwaran Krishnamurthy, Nithyalakshmi Venkatraman, Nandita Nurani Hari, Akshay Varaparla, Balajee Ramakrishnananda, T. Rajesh Senthil Kumar

Design of a new aerofoil for low starting wind speeds for a small VAWT
pp.14480-14484
Pankaj Pulikkul Purushothaman, Rohith Ravi Shankar, Hariharan, S.K., G. Manoj Siddhardha, Balajee Ramakrishnananda

Mechanical Properties and Micro-Macro structural Characteristics of Friction Welded Similar Joints of Aluminium Alloys
pp.14485-14489
S.R.Sundara Bharathi, A.Razal rose, K.Manisekar, V.Balasubramanian

ESTIMATION OF PARAMETER IN NATURAL CONVECTION HEAT TRANSFER IN VERTICAL PLATE USING INVERSE HEAT TRANSFER OPTIMIZATION METHOD
pp.14490-14495
Anu Nair.P, Dr.K.Karuppasamy

Numerical and Experimental Studies on Behaviour of Structural Elements Confined with the Carbon Fibre-Reinforced Polymer (CFRP)
pp.14496-14501
Akshay R. Paralikar, Dr.A.Sivakumar

Investigation of aerodynamic performance of MAV wing with tubercles
pp.14502-14506
T.Rajesh Senthil Kumar, Parvathi M K, Eswar S, Devi P L, Deepak P

EXPERIMENTAL STUDY ON SAFE DISTANCE FOR FIRE SUPPRESSION ACTIVITIES IN PHOTOVOLTAIC SYSTEMS
pp.14507-14510
P.Sathya Ramanujam, Mr.S.Senthil Murugan

Effect of impeller surface roughness on pump cavitation
pp.14511-14515
Anil Pokhrael, V. Jayavishagani, R.Navaneethan, J. Abdullah, P.Kumaran

HCCI (Homogeneous Charge Compression Ignition) Engine with Multi Fuel Injectors
pp.14516-14519
Shiva Subramanian J, Sakthiananthan A, Tamil Chirpi S, Antony Aswin P

DESIGN AND ANALYSIS OF STEERING MECHANISM USING PLANETARY GEAR
pp.14520-14525
S.Arun kumar, R.Masilamani

STUDY ON ENVIRONMENTAL IMPACT MINIMIZATION OF DRIVE SHAFT
pp.14526-14530
K.K.ARUN, Dr. K.SENTHIL KUMAR, A.SUBRAMONIAM

VALUE STREAM MAPPING IN BURNER PANEL FOR INDUSTRIAL BOILERS
pp.14531-14536
S Ganesh Prithiviraj, R S Mohan Kumar, S Vijay Anandraj

DESIGN OF ROBOTIC MANIPULATOR USING MAGNETORHEOLOGICAL FLUIDS FOR HANDLING SOFT AND FRAGILE OBJECTS
pp.14537-14540
S.Vignesh, K.S.Badrinathan

TRANSIENT FLOW ANALYSIS IN AIR BOX OF FLUIDIZED BED COMBUSTIONUSING COMPUTATIONAL FLUID DYNAMICS
pp.14541-14545
R.Ramkumar, J.Sathishkumar, A.Manzuraligan, M.Vivekanandan

EVALUATION OF PRESSURE DROP OF CYCLONE SEPERATOR IN A CEMENT KILN BY USING CFD ANALYSIS
pp.14546-14552
K.K ARUN, Dr.K.SENTHIL KUMAR, ANISH ANTONY

CFD Analysis of Combustion and Emission in SI Engine
pp.14553-14557
J. Krishnaraj, C. Karthick kumar, P.Vasanthakumar, M.Palanisamy

Design and Analysis of Disc Brake Rotor
pp.14558-14562
Venkatramanan R, Kumaragurubaran SB, Vishnu Kumar C, Sivakumar S, Saravanan B

Numerical Study of Pressure Distribution Over GNVR Profile Airship Envelope
pp.14563-14567
Seema K, Anand Raj A, Kiran Babu K M, Sendhilkumar S

Wear estimation and micro structural visualisation of LM25 alloy reinforced with Nano Al2O3
pp.14568-14572
Surendran.R, Nandhini.N, Kumaravel.A

Analysis of Punch Stretching Formability test of DP1000 Steel measured using 3D DIC and compared with results of FEA
pp.14573-14579
A.S.Noor Mohammed, K.S. Sridhar Raja

Design and Motion analysis of Three-Single row Omni Directional Wheeled mobile robot in “Y” structure
pp.14580-14585
A.P.Mohanraj, A.Elango, S.Sridhar, K.Balaji, M.PrasannaKumar

WI-FI Module Based Robotic Control Using Android Communication
pp.14586-14589
Ramya R, Mr.M.H.Masood

Features Revealed Through the Design of Drowsiness and Fatigue Detection Systems- A Review
pp.14590-14606
N Mohammed Abu Basim, Dr. P Sathyabalan

Experimental Investigation Of Centrifugal Pump As Turbine
pp.14607-14610
P. Vasanthakumar, J.Krishnaraj, M.Palanisamy, J.Hariharan

STUDY ON MODIFICATION DESIGN OF RUPTURE DISCS
pp.14611-14614
BALA KUMARAN.A, Dr. V. R.MURUGANANTHAM, KARTHICK.T

Emission Reduction with Selective Catalytic Reduction (SCR) in a Direct Injection Diesel Engine using ZrO2 and TiO2 coating
pp.14615-14619
N. Vadivel, D.Arivazhakan

EXPERIMENTAL INVESTIGATION ON SINGLE CYLINDER DI DIESEL ENGINE FUELED WITH DUAL BIODIESEL(JATROPHA, PONGAMIA PINNATA) BLENDS WITH DIESEL.
pp.14620-14626
Selvaraj K, Shanmugam A

Design of auto disposable syringe and analysing its flow characteristics using fluent
pp.14627-14630
S. Sridhar, J .David Rathnaraj, Gopu

Design and Experimental Movement analysis of four Normal Wheeled Mobile robots with Square structured Omni Directional wheeled Robot
pp.14631-14636
A.P.Mohanraj, A.Elango, S.Harishankar, R.Chiranjeevi balaji, S.Ganapathisubramanian

BIRD IMPACT DAMAGE ANALYSIS IN ENGINE COMPRESSOR BLADE
pp.14637-14640
Dr.N.Sangeetha, P.Aiswarya

Fabrication and Mechanical Analysis of Fiber Metal Laminates with addition of Nanoclay – GLARE
pp.14641-14645
B.Gnanakumar, C.Bhagyanathan

Optimization of surface roughness for cryogenically treated cemented inserts
pp.14646-14650
D.Chirenjeevi Narrasimhan, Dr.N.Srimath

Corrosion And Wear Behavior On Hybrid Composites Of Al-Mg-Si-Alloy Reinforced With Alumina And Groundnut Shell Ash
pp.14651-14654
Sathiaraj.G, Sathish . S

Mechanical Behaviour of A413 alloy Reinforced with Borosilicate Powder
pp.14655-14660
Karthikeyan.I, Sathish.S

Analysis and Evaluation of Circularity Error from CMM Data for EN24 Round Component
pp.14661-14666
Gowtham.K, Murugarajan.A

Fatigue Life Analysis of Tool Die for the Hexagonal Bolt Forming System
pp.14667-14671
M.V. Shanmugam, S. Sathish

Reduction of Rework in Rotor Manufacturing Using Quality Control Tools
pp.14672-14677
R.Karthikeyan, C. Bhagyanathan

Experimental Investigation on Machining Parameters of Aluminium Metal Matrix Composite Reinforced with Boron Carbide Particulates Machined Using Wire-cut Electrical Discharge Machining Process
pp.14678-14684
R. Sathish Waran, P. Karuppuswamy

Review on Wear Behaviour of WC-Co Coating by Thermal Spray Process
pp.14685-14689
S. D. Arunkumar, P. Karuppuswamy

Analysis of Heat Transfer Efficiency with Hybrid Metal Nano Fluid Using Computational Fluid Dynamics Techniques
pp.14690-14696
Maniamramasamy.S, Thomas Renald C.J, Bhagyanathan C

Investigation on Machinability Parameters and Mechanical Properties of LM6 Reinforced with Borosilicate Particles
pp.14697-14702
Tony Thomas, Sathish.S

A Review on Effect of Chemical Treatments of Natural Fibres on Mechanical Properties
pp.14703-14714
Rajesh Bapu T N, Kumaragurubaran SB, Venkataramanan R, Vishnu Kumar C, Saravanan B

Solving Supply Chain Network Optimization Models Using LINGO
pp.14715-14718
Dr.C.Krishnaraj, A.Anand Jayakumar, Dr.S.Deepa Shri

PERFORMANCE AND EMISSION CHARACTERISTICS OF BIODIESEL-BUTANOL BLENDED FUEL IN CI ENGINE
pp.14719-14722
B.Vinoth, Dr. S.Sundarapandian

OPTIMIZATION OF RIB TO CHANNELRATIOS ON SERPENTINE FLOW CHANNEL DESIGN AND OPERATING PARAMETERS ON PROTON EXCHANGE MEMBRANE FUEL CELL
pp.14723-14729
Lakshminarayanan,V., Karthikeyan,P, Muthukumar,M, SenthilKumar,A.P.

ENHANCING THE SURFACE PROPERTIES OF CAST IRON BY NANO COMPOSITE (Ni - ZrO2) COATING
pp.14730-14735
A.Baraniraj, R.Malayalamurthi, M.Vijayan

DEVELOPMET OF SURFACE CHARACTERISTICS OF ASTM A335 P92 STEEL IN EDM CUTTING FOR BOILER APPLICATIONS
pp.14736-14741
Maridurai T, M.Syed Zameeruddin, Sandhyarani Biswas

IMPROVEMENT OF RECENT FERRITIC STEELS AND WELDABILITY ASPECTS OF P91/T91 GRADE
pp.14742-14751
Maridurai T, V.R.Ram Manoj, Sandhyarani Biswas

INVESTIGATION OF OVERLAY WELDING PROCEDURE OF P91 MATERIAL ON PIPE ENDS BY SAW PROCESS
pp.14752-14758
Maridurai T, O.Obli Narasimharajan, Sandhyarani Biswas

Characteristic Study on Elastic Deformation of Passenger Car Bumper Materials
pp.14759-14762
R.Arvinth, J.Hariharan

Finite Element Analysis of Composite Crash Box
pp.14763-14766
R. Maheswaran, V.D. Janarthanan

Cooling Performance of Thermoelastic Cooling Air conditioning System
pp.14767-14772
M. Pasumpon, V. Loganathan, R.Alex Arputhanathan, Dr.R.Vijayan

Movable Fixture for Measuring Centre Distance in Worm Gearbox
pp.14773-14776
P.Vasanthakumar, S.Dinesh, P.R.Rajiv

Investigation on the burr formation during drilling through holes for achieving low cost reinforced aluminium metal matrix composite
pp.14777-14785
L.Francis Xavier, D.Elangovan, S.R.Devadasan, P.Yeshwanth Kumar, M.Bharath

Analysis of Regenerator Matrix in a Gamma Type Solar Stirling Engine
pp.14786-14793
Siddhartha Prabhakar.N, Senthil Kumar.D, Dr.S.Thirumalini

Study on the Influence of Relative Humidity on Pressure Drop Across Air Filter of Diesel Engine
pp.14794-14796
Padmakumar v, Nanthakumar p

Impact of Increase in Intake Air Temperature on Emission Characteristics of a Gasoline Ethanol Blended SI Engine during Cold Start
pp.14797-14802
Arun Jacob Zacharias, Thirumalini S

A Collaborative Application of Six Sigma and Value Engineering in Supply Chain Management and Logistics
pp.14803-14808
Arun Raja, Kevin Thomas, S.P.Anbuudayasankar

Optimization of the surface roughness of the drilled holes on low cost reinforced aluminium metal matrix composite
pp.14809-14820
L.Francis Xavier, D.Elangovan, S.R.Devadasan, S.Nelson Gnanaraj, S. Praveen Kumar

CFD ANALYSIS OF FLAT PLATE SOLAR COLLECTER FOR HEAT TRANSFER ENHANCEMENT USING VARIOUS INSETS
pp.14821-14828
Shubhash A.V.T, Vasanthakumar R

MODELING AND ANALYSIS OF CAR WHEEL RIM BY USING PEEK MATERIAL
pp.14829-14834
Karthick S., Amarnath M.

INSERT OF POROUS TWISTED TAPE IN DOUBLE PIPE HEAT EXCHANGER FOR HEAT TRANSFER ENHANCEMENT
pp.14835-14837
R.SURENDRAN, P.SURESH

Investigation of mechanical and wear behaviour of LM 24 aluminium alloy for different types of casting
pp.14838-14842
M.Thenarasu, Ramnadh. L, P.V.V.V.K. Leeladhar, M. Arun kumar

ModelingandDevelopmentofAutomaticActuatedFireSprinklerUsingShapeMemoryAlloy(NiTinolSpring)
pp.14843-14847
C. Karthickkumar, J.Krishnaraj, G.Sundaram, F.Roopan

DESIGN OF OXYHYDROGEN GENERATOR AND CFD COMBUSTION ANALYSIS OF HYDROGEN IN CI ENGINE
pp.14848-14855
Poornakumar S, Kamalraj S

Analysis of the Machining Characteristics on Surface Roughness of Functionally Graded Aluminium Metal Matrix Composite
pp.14856-14861
Sayuj M Chandrabose, Radhika N

Significance of High Calorific Gaseous Fuel Hydrogen ( H2 ) and High Viscous Non Edible Oil fuelled in Direct Injection Compression Ignition Engine : Investigation of Combustion Performance and Emission
pp.14862-14867
KARTHIKAYAN.S, SANKARANARAYANAN.G, KARTHIKEYAN.R

OPTIMIZATION OF A STATIONARY VCR–CI ENGINE FUELLED WITH DUNALIELLA SALINA OIL AND CORN OIL USING TAGUCHI APPROACH
pp.14868-14882
D Balajee, G Sankaranarayanan, K Sai Prashanth

Analysis the mechanical performance of jute and coir fiber reinforced polymer using ANOVA
pp.14883-14889
Ramesh kannan, Vignesh

A Review on Fuel Cell Technology: Current Trends in PEMFC SOFC DMFC - A Novel Comparison Approach
pp.14890-14894
KARTHIKAYAN.S, KUMARESAN.M, SREERAG.R, VIVEK.C, SREERAG

ACOMPARATIVESTUDYOFMECHANICALPROPERTIES OF FRICTIONWELDEDCOPPER TO ALUMINIUM INTERLAYERWITH MACRO ANALYSIS
pp.14895-14902
E Ravikumar, N Arunkumar, Gopikrishnan

IMPLEMENTATION OF GREEN SUPPLY CHAIN IN SMALL SCALE INDUSTRIES.
pp.14903-14915
Hariharan Ganeshan, Dr. P. Suresh

Effect of Various Injection Pressures and Timings on Emission Characteristics of DI Diesel Engine with Neat Lemongrass oil-Diesel blend
pp.14916-14920
Sathiyamoorthi.R, Sankaranarayanan.G

Experimental Investigation on Performance and Emission Characteristics of MPFI SI Engine Fuelled with Oxygenated Blend
pp.14921-14925
S. Sakthivel, D. Gopinath, E.Ganapathy Sundaram, R.Rajasekar

AUTOMATIC SURFACE DEFECT DETECTION OF LASER WELDED STEEL PRODUCTS USING PROBABILISTIC NEURAL NETWORK AND FUZZY CLUSTERING
pp.14926-14930
Sowmya S, A.Parimala Gandhi

AUTOMATED DETECTION OF ACUTE MYELOGENEOUS LEUKEMIA IN BLOOD MICROSCOPIC IMAGES USING PROBABILISTIC NEURAL NETWORK
pp.14931-14936
Dhivya Ramakrishnan, Dr.M.Jayasheela

AN EFFICIENT FACE RECOGNITION USING FEATURE AND DECISION FUSION WITH SINGLE SAMPLE PER CLASS
pp.14937-14941
Prof. A.USHA RUBY, D.R.MONISHA, Dr. J.GEORGE CHELLIN CHANDRAN, R.PAVITHRA

ROBUST LOCAL TERNARY PATTERN BASED FACE RECOGNITION FROM A SINGLE SAMPLE PER PERSON
pp.14942-14946
Prof.A.UshaRuby, R.Pavithra, Dr.J.George Chellin Chandran, D.R Monisha

Implementation of Transducer Linearization Using Tanner EDA Tool
pp.14947-14950
Mrs. J. BABITHA THANGAMALAR, Ms. S. MUTHU MEERA, Dr. A. ABUDHAHIR

Defect Detection in Ferromagnetic Material Using Magnetic Flux Leakage (MFL) Image Processing
pp.14951-14956
I. JACKSON DANIEL, A. PRABHU, Dr. A. ABUDHAHIR, S. SIVA SURIYANARAYANAN

Theoretical Analysis of Magnetic Flux Leakage Signal from Arbitrary Oriented Rectangular Defect in Ferromagnetic Pipe
pp.14957-14962
V. SURESH, A. HATHIMARY, Dr. A. ABUDHAHIR, N. CHERMAKANI

Design and Analysis of Low Power Reduced Delay Double Tail Comparator
pp.14963-14966
A. Anitha, R.Sasikala, Dr.R.Meenakumari

Wheel Alignment And Object Detection System
pp.14967-14973
K.Boopathy, Mr.B.Vinodh kumar

An Initial Study on Recognition of Text-based CAPTCHA using Template Matching Technique
pp.14974-14979
Mallikka Rajalingam, Valliappan Raman, Putra Sumari

Facial Expression Recognition using DLBP and GLCM to Control a Wheelchair
pp.14980-14985
M.Carmel Sobia, Solomon Easudasan, Dr.A.Abudhahir, A.Geetha

LOW AREA WALLACE MULTIPLIER USING ENERGY EFFICIENT CMOS ADDER CIRCUITRY
pp.14986-14989
R.LEELAVATHI, R.B.DRAVIDAPRIYAA

Sensor Based Automatic Parking System
pp.14990-14993
E.Sindhuja, K.Venkatesan

A Survey on Various Classification Algorithms For Emotion Recognition Applications
pp.14994-14997
K.Kiruba, Dr.D.Sharmila, K.Abirami

TAASR: TRUST BASED AUTHENTICATED ANONYMOUS SECURE ROUTING PROTOCOL FOR MANETs
pp.14998-15001
G.Ramesh Kalyan, Prof. Noel Jeygar Robert

GSM Based Prepaid Energy meter System u Using Raspberry pi Controller
pp.15002-15005
Brundha.B, Mrs.R.Sudha

ACCESSING CONSIGN DATA IN ENCODED CLOUD DATABASE WITH MULTIPLE ONSET
pp.15006-15011
Swathi.C, Kavitha.M.S

Fault detection algorithm Scheme for Wireless Sensor Networks
pp.15012-15019
F.Vincy Lloyd, Dr. B.Anand

ZIGBEE BASED WELLNESS DETERMINATION OF ELDERLY BASED ON DAILY ACTIVITIES
pp.15020-15024
T.ABINAYA, T.MUTHU VIJAYAN

Wireless Network Based Smart Signalling System
pp.15025-15030
E.Dhanusha, D.Koushika Priyadharshini, T.D.Rajeeve

Development of Imaging System for Defect Detection on Steam Generator Tubes
pp.15031-15035
V. SURESH, M.VIVEKANANDAN, Dr. A. ABUDHAHIR, N. CHERMAKANI

PILLAR SUPPORTED MONOCONE ANTENNA FOR AERIAL PLATFORM
pp.15036-15039
Sreejith.C.M, Jemima Priyadarshini.S, Jensi Jacinth Sellam S

Scattering Field Analysis for an Array of 16 Nano Particle Antenna at Optical Frequency
pp.15040-15043
Jensi Jacinth Sellam S, Jemima Priyadarshini S, Sreejith CM

ANALYSIS THE PERFORMANCE OF PROJECT BY USING KPI FACTORS
pp.15044-15049
Ms.G.Nandhinipriya, Guided by Mrs.R.Kowsalya

A Compact Frequency Tunable Microstrip Patch Antenna using Switching Mechanism for Wireless Applications
pp.15050-15053
PON BHARATHI.A, V.ARUN, Dr. L.R.KARL MARX

PERSON AUTHENTICATION USING HAND BASED MULTIMODAL BIOMETRIC SYSTEM
pp.15054-15059
Mr. S.Veluchamy, Dr.L.R.Karlmarx, Miss. T.Renitta

Design of a Novel Balun Fractal Antenna for Multiband Application
pp.15060-15064
V. ARUN, C. KARTHIKADEVI, Dr. L.R.KARL MARX

IMPLEMENTATION AND STUDY OF VOICE OPERATED FIRE EXTINGUISHER VEHICLE
pp.15065-15069
Sreesha M Bhat, Gokulkumar.G, SolomyHema Preethi, John William.A, Lijin Joseph, Nitheesh.P.M

ANFISGUI forWelding ofFerritic Stainless Steel TubeUsing Pulsed Nd-YAGLaser
pp.15070-15075
Saranya.N, Ramalingam.A, Romali Biswal, Ravikumar.R, Murugan.S

ICT BASED SMART TRASH COLLECTION FOR CLEAN CITIES
pp.15076-15079
S.Malathy, R.Nithya, Dr.R.Alageswaran

Reinforcement of ancient scripts using modern imaging
pp.15080-15085
Abishini.J, Jeyasudha.J, Janardhana prabhu.S

TRACKING OF GROUP OBJECTS IN SPACE USING MCMC ALGORITHM
pp.15086-15090
Sandhyarani K, Janardhana prabhu S

Ku Band Circularly Polarized Horn Antenna for Satellite Communications
pp.15091-15094
Anupama Jose, V. Arun, L.R.KARL MARX

Performance Improvement of Code Channel Allocation for Wireless Optical Communications
pp.15095-15100
Indhumathi P, Janardhana Prabhu S

A Semi Blind Equalizer for Higher Order QAM MIMO Systems
pp.15101-15105
Rajeswar G, Janardhana Prabhu S

DYNAMIC VERIFICATION OF DATA IN CLOUD STORAGE
pp.15106-15111
K.Devika, M.Jawahar

A Cost-Effective Approach for Railway Track Damage Detection using Robot
pp.15112-15117
M.ANITHA, D.SASIPREETHA

Analysis of Liver Tumor Using Artificial Neural Network Classifier
pp.15118-15125
Myvili Manoharan, P Yogapriya

A NOVEL ROUTING PROTOCOL WITH IMPROVED PERFORMANCE FOR MANET IN ADVERSARIAL ENVIRONMENT
pp.15126-15133
K.T.Gowdhami, G.ArulKumaran, Dr. R. K. Gnanamurthy, S.Fowjiya

DETECTION AND PREVENTION OF SINKHOLE ATTACK ON DSDV PROTOCOL IN MANET
pp.15134-15139
M.Kayalvizhi, Mr. G. Arul Kumaran, Dr.R.K.Gnanamurthy, A. Nithyasri

A NEW DECIMAL MATRIX CODE FOR MITIGATE MULTIPLE CELL UPSET
pp.15140-15144
Iswarya Gopal, Rajasekaran.T

Security enhancement in virtual networks and prevention of botnet intrusions using EIDS
pp.15145-15148
Suganya.M, K..Moorthi, V.Sakthivel

FAULT IDENTIFICATION MECHANISM FOR WIRELESS SENSOR NETWORK
pp.15149-15154
Suriya. A, Kiruthika.M

Protecting Source Location Privacy using Fake Id based approach in Wireless Sensor Network
pp.15155-15161
B.Vinothini, R.Revathi

QoS based routing in Wireless sensor network for Improving Reliability and Delay
pp.15162-15167
K.Nivetha, Vishnu Kumar Kaliappan

Identification of Optimal Vendor Using PDI Middleware Architecture
pp.15168-15175
Sakthi.P, S.Karthikeyan

Efficient Secure Location Aware protocol for detection of Replication nodes in wireless sensor network
pp.15176-15180
Kalpana.G, Revathi.R

Enhanced Content Based Indexing For Web Document Using Content Extraction Algorithm
pp.15181-15187
M.Sindya, S.Dhanabal

Secure and Efficient Cloud Security Strategy on Guessing Attacks Using Three Party Authentication Key Exchange Protocol
pp.15188-15194
K.T.K.Rajkumar, Dr.K.Vishnu Kumar

ENHANCED RELIABILITY BASED COOPERATIVE BLACK HOLE DETECTION AND PREVENTION IN MANET
pp.15195-15201
Pariventhan.P, Sharrath.M

A Novel Segmentation Approach for an Automated Bone Fracture Detection
pp.15202-15208
S.Deviabirami, B.Hemalatha

Efficient Parallel Processing method for Clustering of High Dimensional Data set using K-Means Algorithm
pp.15209-15213
V. Arun Kumar, S. Dhanabal

An Enhanced Dithering Balanced Block Replacement with Halftoning Technique for Embedded Extended Visual Cryptography Strategy
pp.15214-15219
M.Desiha, Vishnu Kumar Kaliappan

Enhancing Accuracy by Concept Based Multi Pass Document Clustering for Text Mining
pp.15220-15223
C.Gladia Metrilda, S.Dhanabal

EXPERIMENTAL STUDY ON THE MECHANICAL PROPERTIES OF HEMP FIBER REINFORCED CONCRETE
pp.15224-15229
Dr.K.Ramadevi, R.Manju

EXPLORING THE POSSIBILITY OF OPENING A NEW ROUTE TO OOTY
pp.15230-15238
Mrs.R.Manju, Dr.K. Ramadevi, Mr.M.Arunachalam

EXPERIMENTAL INVESTIGATION OF ELECTROCHEMICAL MICROMACHINING PROCESS PARAMETERS ON ALPHA-TITANIUM USING SODIUM NITRATE
pp.15239-15243
T.Geethapriyan, K.Kalaichelvan, A.Jothilingam

 

 

[UP]

 

 

© All rights are reserved with Research India Publications                             Home  Journals  Contact